Technicians STEREO INTEGRATED AMPLIFIER SU-X91 1 STEREO DOUBLE CASSETTE DECK RS-X911 OPERATING INSTRUCTIONS Notes: « Specifications differ according to the area code. «The “EB" area cods, for example, indicates United Kingdom specifications. »The “EB” indication ls shown on the packing case and serial number tag. Before operating this unit, please read these instructions completely.
Dona F5 Jowl Fare We want to thank you for selecting this product and to welcome you to the growing family of satisfied Technicians product owners around the world. We feel certain you will get maximum enjoyment from this new addition to your home. Please read these operating instructions carefully, and be sure to keep them handy for convenient reference. Contents Accessories For United Kingdom. Suggestions for safety Connections Front Panel Controls and Functions .
Suggestions for Safety M Use a standard AC wall outlet 1. Use from an AC power source of high voltage, such as for an air conditioner, fs very dangerous, There is the possibility that a fire might be caused by making such a connection. 2. A DC power source cannot be used. Be sure 1o check the power source carefully, especially on & ship or either place where DT is used. E Grasp the plug when disconnecting the power supply cord 1. Wet hands are dangerous.
Connections Tom table Connection diagram shown are for connections to a Technicians hi-phi component system. Y Make connections in the numbered sequential order, [1]Connect the stereo connection cables (The Included stereo connection cables are only for the tuner and cassette ape deck). [2]Connect the Typos cables (The included Lips cables are only for the cassavas tape deck).
[3]Connect the flat cables. the 3-core flat cable {undecided. [32)Connect the 3-core flat cable (included). @Conn act the AC power supply cords. @ Connect this cord only after ali other cables and cords have been connected. @ Fit a suitable plug to an AC power supply cord. Household outlet h 2z i the cord Is 1o be connected to the household AC outlet, cut off and dispose of the plug and replace Graphic equalizer 2 GUTTED ‘ with a suitable plug.
Connections s See below. Connection to other equipment See right. Gannet a video disc player {audio only contactable, etc. ® W Stretch contraction cable {not Included} Connection to speaker systems Two pairs of speaker systems {main, surround-sound) can be connected to the amplifier. Speaker systems that can be connected (1o any of the speaker connection terminals of the amplifier) are speaker systems with an impedance ohms. Connect the speaker systems to the “SPEAKERS” terminals.
Front Panel Controls and Functions [1]Power switch (DOWER) [volumes overbalance indicator {BALANCE VOLUME) This indicator usually shows the volume level; when the balance control is passed, however, the position of balance lever is displayed for five sands, after which the display returns again to indication of the volume level. indicator The volume level is indicated in decibels (dB).
Front Panel Controls and Functions {continued) [1]DECK onion switch (DECK) [2] Timer switch ([T TIMER) This switch ¢en be used to automatically begin a tape recording or tape playback at & certain time, selected by an optional timer. {(Refer to page 17) (8] Reverse-mode selector (REVERSE MODE) This selector can be used for selection of the reverse mode (for either playback or recording). [4]Tape counter (DECK A COUNTER) Indicates the amount of tape movement.
[cassette holder [2] remote-control indicator (REMOTE CONTROL) fs Indicator illuminates to indicate that this tape deck can now be controlled by the remote-central transmitter. [3] Reverse-side Indicator This indicator illuminates, during playback or recording of tape deck A, to indicate that side "B of the tape is being sod. [4] Forward-side Indicator This indicator illuminates, during playback or recording of tape deck A, to indicate that side “A” of the tape is being used.
Listening to Tapes 6p=b5 5 = Ba Cassette tape deck Tuner Amputation 1 POWER Switch ON the power switch of the tuner and amplifier. Press the Input selector on the amplifier marked “TAPE”. {The indicator will illuminate} W To temporarily stop playback (tape deck A only) 3 Fewer] PAUSE| Press the pass bunion. {The playback indicator wilt begin flashing.} Switch OFF the timer switch. To resume playback, press the playback button corresponding 1o the side of the tape being played back.
To listen to a Dolby NR recorded tape e Set the Dolby noise-reduction button to ON-. [ (The Indicator wil illuminate) 5 Es The Dolby noise-reduction system is a system designed to effectively reduce the annoying high-piquancy “hissing” noise typically heard trim tapes if this system is not used. During recording, the system functions to easiness the feel of the high-frequency part of the sound, and then, during playback, that same portion is weakened and returned o the previous level.
Listening to tapes o locate and play a certain tune Ml To search for a desired part of the tape while listening to sounds at high speed This faction is convenient for locating the beginning of a tune {non-recorded portion) since sound smattering 1s possible white searching. Press and hold the rewind/review, o fest-forward/ cue button (deck A or B} during playback.
Listening to Other Sources 2 pliers POWER| Switch ON the power switch of the tuner and amplifier. 1 Select the sound source. CD: Crass to listen to compact discs, AUX: Press to listen to sound from equipment connected 10 the “AUX" terminals. TUNER: Press to listen to radio broadcasts. When this unit is used in combination with the Technicians tuner model ST-X933L, note that there is an automatic change 1o “TUNER" when one of the preset tuning bunions ar the tuning buttons of the tuner is pressed.
Recording um s Your attention s drawn to the fact that regarding per-recorded tapes or disc on other published or broadcast material may Infringe copyright laws. 1 Tuner [Power Switch ON the power switch of the tuner and amplifier. 1 2 Select the program source to be recorded. TIMER] Switch OFF the timer switch. [DECK] Switch ON the DECK falloff switch. [EJECT Press the eject button, and then insert the cassette to be used for recording {Tha part of the cassette where the pale is ex.
made wheel di Edit-Recording — —eim e ammo. ™ " 2 Recording Indicator Edit-recording Playback indicator tape-gaped Indicator Cassette tape deck Tuner Amplifier 1 POWER| Switch ON the power switch of the tuner and Press the synchrony-start button. amplifier. {The recording wiki begin) In order to avoid an operation error, be sure to press the edit-recording tape-speed button after the edit-recording Is finished, and check to be sure that the indicator (above the [TIMER button) s switched OFF.
Edit-Recording Tape deck A Tape deck B Synchrony-start button Sta button Rewind/review button Fast-forwarder button W To omit unwanted material during sit-recording [PAUSE] Crass the pause button. Tape deck A will change to the recording stand-ht mode, and playback will continue on tape deck B. Crass the playback bunion corresponding 1o the side of the tape being recorded when the tape reaches a point where you want 1o record. M To locate a certain tune while edit-recordings are being made 1.
Timer Recording/Playback 1§ an audio timer (ot included) is connected to the tuner, recording of a radio broadcasts,or taps playback, wiki automatically begin at the proles time. Timer recording or playback is also possible by using a tuna with mire. Connect the AC power cord of the tuna to the power source outlet of the timer. (See the operating instructions of the timer for detailed information.) Note: Payback by one deck only car only be done by deck A.
About Cassette Tapes Avoid the following types of tapes minuteness {or longer) tapes Because this tape is very thin, it might stretch during use, become tangled with rotating parts in this unit. andiron tape movement might not ba stable. * Fe.Cr tape (TYPE I} The high range will be emphasized and a fiat frequency responds characteristic cannot be obtained. * Metal tape without detection holes In the cassette Recordings will ba very distorted. (There is no playback problem, however.
3 L M Note: Specifications are subject 1o eC n lCa eCl locations change without notice, Weight and dimensions are approximate, X911 (DIN 45 500) ERE INTEGRATED AMPLIFIER M AMPLIFIER SECTION Muting -20dB Super bass 70 Mz, dB DIN power output Output voltage 1 kHz THD: 1 % Zx40 W {8 Q) TAPE REC OUT 200 my Total harmonic distortion Channel balance, AUX 250 Hz +10dB rated power at 1 kHz 1% (880 Chance! separation, AUX 1 kHz 55 dB Harmonic distortion Headphones output level and Impedance 421 mVI330 0 half power a
Troubleshooting Guide Before requesting service for this unit, check the chart below tor a possible cause of the problem you are experiencing.
