tunics STEREO INTEGRATED AMPLIFIER SU-X302 STEREO DOUBLE CASSETTE DECK RS-X302 OPERATING RECONSTRUCTED Notes: = Specifications differ according to the area code, s The "EB" area cods, for example, indicates United Kingdom specifications. © The "EB" indication Is shown on the packing case and serial number tag Before operating thee units, please read these instructions completely.
x‘% ;l/’b We want to thank you for selecting this product and to welcome you to the growing family of satisfied Technicians product owners around the world. We feel certain you will get maximum enjoyment Contents Accessories For United Kingdom. Suggestions for Safety . S Connections .. Front Pansy Controls and Functions Listening to Tees Listening to Other Sources Standard Operations Volume Level Setting for Timer 13 ¢ 0600066 8 0 Accessory eS (Refer 10 pages 4 and 6) from this new addition to your home.
Suggestions for Safety 28 Use a standard AC wall sutler 1. Use farm an AC power scarce of high voltage, such as for an sir conditioner, Is very dangerous. There is the possibility that a fire might be caused by making such a corn action. 2. A DG power juice cannot be used. Be sure to check the power source carefully, especially on a ship or other place where DC is used. B Grape the plug when disconnecting the prows supply cord 1. Wet hands aro dangerous.
Connections Amplifier L] ,tlfl)(s Cassette deck SYSTEM CONTROL OUT] CONTROL Sterno connection cable White (L)% Red (R} See the appealing instructions of the tuner (8T-X3021) for details. [3] Connect the stereo connection cables. [2] connect the L-type cable. [3] Connect the flat cable. SYSTEM CONTROL OUT| This terminal is used 1o connect a Technicians compact disc player or a Technicians stereo graphic equalizer with the “SYSTEM CONTROL IN"' terminal.
Make connections to each component in the system by using stereo connection cables (not included). 02 Q@ ®@us [SYSTEM CONTROL IN] Connect a compact disc player. Compact disc player LIME BUY “TENNER” terminals T Connect & tuna. Tuner I'Nfifl o= GUT PUT “SYSTEM CONTROL IN” terminal This terminal is used o connect a Techniques tuner with the “SYSTEM CONTROL QUT" terminal.
Connections OUTLET [niacin] ACTIVE CURRENT SENSOR [SPEAKERS] Two pairs of speaker systems {main, surround-sound) can be connected to the amplifier. Speaker systems that can be connected to any of the speaker connection terminals of the amplifier are speaker systems with an impedance ohms, Make connections to each speaker system by using speaker cords {not included). { Main speaker systems {not included) Connect to the “SPEAKER” terminal.
Front Panel Controls and Functions Power switch (POWER) EZ] Volume-vols! Indicator (VOLUME LEVEL) The volume lover ig indicated in decibels {dB). The dB indication numerically shows the attenuation characteristic of the amplifier; the indication ranges rom Mo e B {minimum) to 0 dB™ {maximum). The volume ls val becomes greater as the Indication changes trim Volume control (VOLUME) Volume preset button (VOLUME PRESET) This button can be used ta retain the volumes level for timer aeration in the memory.
Front Panel Controls and Functions {continued) Controls common to both tape decks m DECK COFFIN switch (DECK) @ Synchrony-start button (SYNCHRONY START) This button can be used to start a tape-o-tape recording, simultaneously starting tape deck 1 (the playback deck) and pale deck 2 {ihe recording deck), @ Tape-to-tape recording tape-speed selector {TAPE EDIT SPEED) This selector can be used to select the recording speed when a taps-to-tapa recording is made.
Tape deck 1 Tape deck 2 ((Controls applicable to tape deck 1 andiron 2) Cassette holder [2] Elect button (& EJECT) This button can be used to open the cassette holder. [8] Pause button {18 PAUSE) Whig button can be used to temporarily slop the pale playback or recording, on pale deck 2 only, [4] Record button (REC) This button can be used to change tape deck 2 to the recording stand-by mods.
Listening to Tapes Either normal, GrO, or metal tape cassettes can be used. 1 7 % Dolby noise-reduction indicators Cassette tape deck Amplifier 1 Switch ON the power. 2 Switch ON the DECK ONION switch. Press the eject bunion for the tape deck (“1” of “2"} to be sad for playback, and then insert the cassette tape. . & o {The part of the cassette where the tape is exposed should face downward.} — Press the Dolby transduction selector to select the Dolby NR system.
H To temporarily stop playback {tape deck Z only) PAUSE| Press the puss button. (The playback Indicator will begin flashing.) To resume playback, pass the playback button corresponding 1o the side of the taps being played back. % To stop playback STOP| Press the stop bunion. (The playback indicator will switch OFF.
Listening B To search for a desired part of the tape wheels straitening a1 high speed This function is convenient for locating the beginning of a tune {nor-recorded portion), because sound monitoring is possible while searching. Press and hold the viewfinder, or fast-forwarder button {deck 1 or 2) during playback. Normal playback will resume from the point where the button is released.
Standard Operations SUPER BASS] [SURROUND| [VOLUME| [BALANCE 5A85| [TREBLE] Headphones {not included) (See below.) [TREBLE] Adjust the high-frequency sound o the desired phone quality. [Bass Adjust the low-frequency sound io the desired {one quality. Adjust the balance of the leftist volume. [VOLUME] Adjust the volume level, SUPER BASS) Press this button to boost the super low frequency range. (The indicator will illuminate) SURROUND! Sat to the “ON” position to activate the surround-sound fest.
R@C@ Lydia ___To record from a sound source g {isle desk 2 only) either than another tape Either normal, G1Q;, or meta tape cassettes can be used. 1 2 Playback indicator PAUSE Dolly noise-reduction indicators Recording indicator Cassette tape deck r_ Amplifier 3702 Dust the recording novel. Adjust so that the Indication of the Input level meter occasionally is as high as shown below. 1 Switch ON the power. Select the program roe o be recorded. 2 o6 © program sou Normal, Cr0.
By simply pressing the automatic-record-muting button while a recording is being made, a sitter interval (which is necessary for locating the beginning of a tune) can be made. Automatic-record-muting bunion This feature is also convenient for omitting unwanted material such as commercial messages, elc. during recording. During the recording, prods the semiautomatic-muting bunion To resume recording, prods the playback button corresponding ons time. to the side bang recorded.
Tape-to-Tape Record Either normal, CrO, or metal tape cassettes can be used. Your situation ls drawn io the fact hat razor ding per-racorded tapes or discs on other published or broadest material may infringe copyright laws. Recording indicator pros] ng Changes can be made while recording from one tape to another 3 Playback indicator Cassette tape deck Amplifier Fast-forwarder and viewfinder buttons 'g Switch ON ths postwar, 2 Switch ON the DECK ON/OFF switch.
After Recording Use @ screwdriver v Tab for side “A” or similar object to “Tab for side "B" break out the tab. 8 To re-record on a protected cassette Cover the slot with adhesive tape. Attach tape, When new recordings are made on a recorded tape, aHl sounds recorded on that portion of the tape are automatically erased, To areas a pale without making a new recording, follow the steps below. 1. Insert the recorded cassette Into the cassette holder of tape sack 2. 2. Bet the extraordinarily control o “0”. 3.
About Cassette Tapes =+ 120-minute {or longer) tapes Because this ape is very thin, it might stretch during use, become tangled wile rotating parts in this unit, and for tape movement might not be stable. ° Fe-Cr tape (TAPE M} The high range will be emphasized and a fall frequency response characteristic cannot be obtained.
Troubleshooting Guide Be tore requesting service for this unit, check the chart baton for a possible cause of the problem you are experiencing.
