Operating Instructions Network Audio Amplifier SU-GX70
Music is borderless and timeless, touching people’s hearts across cultures and generations. Each day the discovery of a truly emotive experience from an unencountered sound awaits. Let us take you on your journey to rediscover music. Delivering the Ultimate Emotive Musical Experience to All At Technics we understand that the listening experience is not purely about technology but the magical and emotional relationship between people and music.
Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. •• About descriptions in these operating instructions Pages to be referred to are indicated as “⇒ ○○”. The illustrations shown may differ from your unit. Unless otherwise indicated, operations are described using the remote control. •• Illustrations and figures in this manual are of the silver main body.
Features Unique full-digital amplifier reproducing digital signals with high quality sound Equipped with a unique full-digital integrated amplifier, this unit reproduces digital signals of music streaming, etc. with high purity by eliminating the influence of jitter and noise. The TV sound can also be reproduced clearly by applying the high-quality sound reproduction technology accumulated by Technics to HDMI ARC.
Table of contents Read first 07 Please carefully read the “Safety precautions” of this manual before use. Control reference guide 16 This unit, Remote control Connections 23 AC mains lead connection, Network settings Operations 38 Playback of connected device/equipment, music streaming services, etc. Settings 94 Sound adjustment, Other settings Others 111 Troubleshooting, Specifications, etc.
For Switzerland K2CS3YY00048 Accessories thelead United Kingdom and Ireland ACFor mains (1) K2CT3YY00081 DAB antenna (1) N1EYYY000015 Remote control (1) N2QAYA000239 Batteries for remote control (2) •• Product numbers provided in these operating instructions are correct as of February 2023. •• These may be subject to change. •• Do not use AC mains lead with other equipment.
Read first Safety precautions................................ 08 Warning..................................................... 08 Caution...................................................... 08 Installation............................................ 14 Installation................................................. 14 Unit care.................................................... 14 Using “Technics Audio Center”................... 14 Firmware updates.......................................
Read first Safety precautions Warning Unit •• To reduce the risk of fire, electric shock or product damage, Do not expose this unit to rain, moisture, dripping or splashing. Do not place objects filled with liquids, such as vases, on this unit. Use the recommended accessories. Do not remove covers. Do not repair this unit by yourself. Refer servicing to qualified service personnel. Do not let metal objects fall inside this unit. Do not place heavy items on this unit.
Placement •• Place this unit on an even surface. •• To reduce the risk of fire, electric shock or product damage, Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure this unit is well ventilated. Do not obstruct this unit’s ventilation openings with newspapers, tablecloths, curtains, and similar items. Do not expose this unit to direct sunlight, high temperatures, high humidity, and excessive vibration.
Caution for AC Mains Lead (For the AC mains plug of three pins) For your safety, please read the following text carefully. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 10-ampere fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 10-ampere and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark or the BSI mark on the body of the fuse.
Disposal of Old Equipment and Batteries Only for European Union and countries with recycling systems These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points in accordance with your national legislation.
EU Declaration of Conformity (DoC) Hereby, “Panasonic Corporation” declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Customers can download a copy of the original DoC to our RE products from our DoC server: https://www.ptc.panasonic.eu Contact to Authorised Representative: Panasonic Marketing Europe GmbH, Panasonic Testing Centre, Winsbergring 15, 22525 Hamburg, Germany Indoor use: Inside buildings only.
UK Declaration of Conformity (DoC) Hereby, “Panasonic Corporation” declares that this product is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017 No.1206. Customers can download a copy of the original DoC to our RE products from our DoC server: https://www.ptc.panasonic.
Read first Installation Installation •• Turn this unit off, fold the antenna and disconnect all the equipment before moving this unit. Be sure to raise this unit when moving, and do not drag this unit. •• Confirm the installation location can sustain the weight of this unit. (⇒ 128) •• For the dimensions of this unit (⇒ 128) •• Refer to the following figure for the dimensions of this unit’s legs. Front A A: 340 mm B: 228 mm B Unit care Pull out the AC mains lead from the socket before maintenance.
Firmware updates Occasionally, Panasonic may release updated firmware for this unit that may add or improve the way a feature operates. These updates are available free of charge. •• Refer to “Firmware updates” (⇒ 101) for details on update. To restore all the settings to the factory defaults Press [SETUP]. Press [ ], [ ] repeatedly to select “Initialization” and then press [OK]. Press [ ], [ ] to select “Yes” and then press [OK]. •• A confirmation screen appears.
Control reference guide This unit (front)..................................... 17 This unit (rear)....................................... 18 Remote control..................................... 19 Using the remote control........................... 21 Remote control mode................................ 21 Table of contents ...
Control reference guide This unit (front) 01 02 03 04 05 06 07 08 09 01 [ ] Standby/on button •• Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. 02 Power indicator •• Blue: The unit is on. •• Off: The unit is off. Red: The unit is in standby mode. 03 Headphones jack •• When a plug is connected, the speakers and PRE OUT terminals do not output sound.
Control reference guide This unit (rear) 01 05 02 03 04 06 07 08 04 09 10 11 12 13 14 01 Analogue audio input terminals (PHONO) (⇒ 63) •• Please use the cable less than 3 m. 02 PHONO EARTH terminal (⇒ 63) •• For connecting the ground wire of a turntable. 03 Analogue audio input terminals (LINE1/LINE2) (⇒ 63) 04 Wireless LAN antenna (⇒ 30) 05 DAB ANT/FM ANT terminal (⇒ 24) 06 HDMI terminal (⇒ 57) •• You can connect the HDMI equipment with ARC function (TV, etc.
Control reference guide Remote control 01 02 03 10 04 11 12 05 06 07 13 08 09 14 15 01 [ ]: Standby/on switch •• Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. 02 [USB]/[RADIO]/[ -PAIRING]: Select the device to be operated (⇒ 42, 48, 52, 62) 03 [>INPUT<]: Switch the input source •• Press repeatedly to switch the input source.
08 Playback operation buttons 09 [FAV]: Select the favourite radio station or playlist (DAB/DAB+ / FM / USB-A / DMP / Internet Radio / Spotify / TIDAL / Deezer / Qobuz, etc.) (⇒ 107) •• You can register up to 9 favourite stations. To register, press and hold [FAV] while the favourite station or playlist is played back, select the number to register and then press [OK].
Using the remote control 2 1 R03/LR03, AAA (Alkaline or manganese batteries) Note •• Insert the battery so the terminals ( and ) match those in the remote control. •• Point it at the remote control signal sensor on this unit. (⇒ 17) •• Keep the batteries out of reach of children to prevent swallowing. Remote control mode When other equipment responds to the supplied remote control, change the remote control mode. •• The factory default is “Mode 1”. 1 Press [SETUP].
■■When “Remote 1” or “Remote 2” is displayed When “Remote 1” or “Remote 2” is displayed, the remote control modes of this unit and remote control are different. Perform step 3 above.
Connections Antenna................................................. 24 Antenna connection.................................. 24 Speakers................................................ 25 Speaker connection................................... 25 AC mains lead........................................ 27 AC mains lead connection.......................... 27 Network settings.................................. 28 Wired LAN connection............................... 30 Wireless LAN connection....................
Connections Antenna •• This unit can receive DAB+ and FM stations with the DAB antenna. Antenna connection Be sure to tighten the nut fully. Adhesive tape (not supplied) DAB indoor antenna (supplied) •• Tape the antenna to a wall or column at the position with the least amount of interference. •• If radio reception is poor, use a DAB outdoor antenna (not supplied). Note •• The interference may occur if any electronic devices are nearby.
Connections Speakers Speaker connection Speaker cable Speaker cable (not supplied) (not supplied) 1 Turn the knobs to loosen them, and insert the core wires into the holes. 2 Tighten the knobs. Note •• Make sure to connect the speakers before AC mains lead is connected. •• When the connections are completed, pull the speaker cables lightly to check that they are connected firmly.
•• Though the spade plug (A: 16 mm or less, B: 8 mm or more) can be connected, some plug may not be connected depending on the shape of plug. A B •• For details, refer to the operating instructions of the speakers. •• You can make the optimum adjustment (LAPC) according to your own speakers.
Connections AC mains lead AC mains lead connection Connect only after all other connections are completed. AC IN terminal AC mains lead (supplied) To a household mains socket •• Use only the supplied AC mains lead. •• Do not connect the AC mains lead until all other connections are complete. •• Insert the plugs of the cables to be connected all the way in. •• Do not bend cables at sharp angles. •• Wireless LAN (Wi-Fi®) setting may start when this unit is turned on.
Connections Network settings You can stream online music services or music files from your smartphone/tablet to this unit. To use these features, this system must join the same internet-connected network as the compatible device. This unit can be connected to a router using a LAN cable or built-in Wi-Fi®. For a stable connection to the network, a wired LAN connection is recommended.
■■Preparation If you install the Google Home app or Apple Home app on your smartphone/tablet, you can set up a connection using the application. •• When using Chromecast-enabled apps to play music on this unit, set up a connection using the Google Home app and a Google Assistant-enabled device. •• When using AirPlay to play music on this unit, add the product to Home in the Apple Home app. Adding this unit to the network via Apple Home app will also allow the user to stream audio using Siri.
Wired LAN connection LAN cable (not supplied) Broadband router, etc. 1 Disconnect the AC mains lead. 2 Connect this unit to a broadband router, etc. using a LAN cable. 3 Connect the AC mains lead to this unit. (⇒ 27) 4 Press [ ] to turn this unit on. •• When the connection is established, “ displayed. ” is 5 Press [>INPUT<] to select “Chromecast built-in™”. (Using Google Home app) 6 Open the Google Home app and follow the on-screen instructions to set up a connection.
Wireless LAN connection ■■Preparation Disconnect the AC mains lead. Disconnect the LAN cable. Place this unit as close to the wireless router as possible. Point up the antenna on the rear of this unit as shown in the figure. Connect the AC mains lead to this unit. (⇒ 27) Note •• The setting will be cancelled after the set time limit. In that case, try the setting again. •• To cancel this setting in the middle, press [ ] or turn the unit to standby mode.
Note •• This unit will be displayed as “Technics-SUGX70-****” if the device name is not set. (“****” stands for characters unique to each set.) •• You can check your network information (SSID, MAC address and IP address) from the Google Home app or “Technics Audio Center” app. •• Some items on the Google Home app are irrelevant to this unit. •• When this unit is switched to standby mode and turned on before the Wi-Fi setting is complete, “Wi-Fi Setup” is displayed.
5 After “WPS” is displayed, press the WPS button on the wireless router. Example: •• “Linking” blinks. •• When the connection is established, “Success” is displayed. “Fail” may be displayed if the connection was not complete. Try this method again from the setup menu. If “Fail” is still displayed, try other methods. 6 Press [OK] to exit the setting. ■■Using the WPS PIN code “WPS PIN” If your wireless router supports WPS, you can set up a connection by entering the WPS PIN code.
5 Enter the PIN code into the wireless router from PC, etc. •• “Linking” blinks. •• When the connection is established, “Success” is displayed. “Fail” may be displayed if the connection was not complete. Try this method again from the setup menu. If “Fail” is still displayed, try other methods. 6 Press [OK] to exit the setting. Note •• Depending on a router, other connected devices may temporarily lose their connection. •• For details, refer to the operating instructions of the wireless router.
■■Using the Google Home app or Apple Home app “Wi-Fi Setup” 1 Open the Google Home app or Apple Home app and follow the on-screen instructions to set up a connection. •• When the connection is established, “Success” is displayed. “Fail” may be displayed if the connection was not complete. Try this method again from the setup menu. If “Fail” is still displayed, try other methods. 2 Press [OK] to exit the setting. Note •• This unit will be displayed as “Technics-SUGX70-****” if the device name is not set.
Note •• You cannot use Chromecast app with this unit when the network setting is set up by “WPS PIN” for “WPS Push”. To stream music files with this unit using Chromecast-enabled apps (⇒ 35), set up the network setting using Google Home app. (⇒ 34) Not all music streaming services are available in all countries/regions. Registration/subscription may be required, or fees may be charged to use music streaming services. Services are subject to change or be discontinued.
This unit’s name on the network “Friendly Name” You can change this unit’s name on the network (e.g. “Room 1” or “Living Room” etc.). 1 Press [SETUP]. 2 Press [ ], [ ] repeatedly to select “Network” and then press [OK]. 3 Press [ ], [ ] repeatedly to select “Friendly Name” and then press [OK]. •• The current name of this unit is displayed. Press [OK] to edit. 4 Press [ ], [ ], [ ], [ ] to input the friendly name. •• Only ASCII characters can be used.
Operations Listening to DAB/DAB+........................ 42 Storing DAB/DAB+ stations....................... 42 Listening to the stored DAB/DAB+ stations...................................................... 42 Presetting DAB/DAB+ stations................... 43 Listening to preset DAB/DAB+ stations...... 43 Listening to the secondary service.............. 43 Display....................................................... 44 Manually tuning.........................................
Using USB device.................................. 52 Operations during playback....................... 52 Repeat playback “Repeat”.................................................... 53 Random playback “Random”.................................................. 53 Add a track to playlist................................. 54 Calling up the playlist................................. 54 Deleting the track from playlist.................. 54 Using digital audio output device.......
Playing Internet Radio and Podcasts................................................. 70 Operations during playback....................... 71 Repeat playback “Repeat”.................................................... 71 Random playback “Random”.................................................. 72 Adding a station to favourite list “Add Favourites”........................................ 72 Call up the favourite track/album/artist...... 72 Deleting the favourite station “Delete Favourites”..................
Playing Qobuz....................................... 87 Operations during playback....................... 88 Repeat playback “Repeat”.................................................... 88 Random playback “Random”.................................................. 89 Adding a track/album/artist, etc. to favourite list “Add Favourites”........................................ 89 Call up the favourite track/album/artist...... 89 Deleting the track/album/artist “Delete Favourites”................................
Operations Listening to DAB/DAB+ Make sure that the DAB antenna is connected. (⇒ 24) Storing DAB/DAB+ stations To listen to DAB/DAB+ broadcasts, the available stations need to be stored in this unit. •• This unit will automatically start scanning and store the stations available in your region if the memory is empty. 1 Press [RADIO] repeatedly to select “DAB/DAB+”. 2 “Auto Scan” starts automatically. •• “Scan Failed” is displayed if the auto scan is unsuccessful.
Presetting DAB/DAB+ stations You can preset up to 20 DAB/DAB+ stations. 1 Press [RADIO] repeatedly to select “DAB/DAB+”. 2 Press [PGM] while listening to a DAB broadcast. 3 Press [ ], [ ] to select the desired preset channel, and then press [PGM]. •• Presetting is not available when the station is not broadcasting or when the secondary service is selected. •• The station occupying a channel is erased if another station is preset in that channel. Listening to preset DAB/DAB+ stations 1 Press [MENU].
Display The information switches on the display when pressing [INFO] each time. Dynamic label: Information about the broadcast PTY display: Programme type Ensemble label: Name of the ensemble Frequency display: The frequency block and frequency are displayed. Station name: Name of the broadcasting station Manually tuning If “Scan Failed” is displayed after “DAB/DAB+” is selected or after an auto scan, use this function to scan a frequency block.
Checking the DAB/DAB+ signal reception quality 1 Press [MENU]. 2 Press [ ], [ ] repeatedly to select “Signal Quality” and then press [OK]. •• The current frequency block is displayed and then the reception quality is indicated. •• Reception quality: 0 (poor) – 8 (excellent) 3 If the signal reception quality is poor, move the antenna to a position where the reception quality improves. 4 (To continue checking the quality of other frequency blocks:) Press [ ], [ ] again and select the desired frequency.
Operations Listening to FM Radio Make sure that the antenna is connected. (⇒ 24) Storing FM stations You can preset up to 30 channels. •• A station previously stored is overwritten when another station is selected for the same channel by presetting. 1 Press [RADIO] repeatedly to select “FM”. 2 Press [MENU]. 3 Press [ ], [ ] repeatedly to select “Auto Preset” and then press [OK]. 4 Press [ ], [ ] to select an item and then press [OK]. Lowest: To begin the auto preset with the lowest frequency (FM 87.50).
Manual tuning and presetting 1 Press [MENU]. 2 Press [ ], [ ] repeatedly to select “Tuning Mode” and then press [OK]. 3 Press [ ], [ ] to select “Manual” and then press [OK]. 4 Press [ ], [ ] to tune to the required station. To start automatic tuning, press and hold [ ] or [ ] until the frequency starts scrolling. Tuning stops when a station is found. ■■To preset the channel While listening to the radio broadcast, press [PGM]. Press [ ] or [ ] to select the channel and then press [PGM].
Operations Using Bluetooth® You can listen to the sound from the Bluetooth® audio device from this unit wirelessly. •• Refer to the operating instructions of the Bluetooth® device for details. Bluetooth® device Pairing a Bluetooth® device ■■Preparation •• Turn on the Bluetooth® device and place the device near this unit. •• Make sure that the Bluetooth® feature is activated on the device. •• If a Bluetooth® device is already connected, disconnect it.
5 Select “Technics-SU-GX70-****” from the Bluetooth® device’s menu. •• The name of the connected device is indicated on the display. •• The MAC address “****” (“****” stands for a character that is unique to each set.) may be displayed before “Technics-SU-GX70-****” is displayed. •• If the device name is set on the Google Home app or Apple Home app, the set name is displayed. Note •• You can also enter pairing mode by pressing and holding [ -PAIRING] when the input source is other than “Bluetooth”.
Operations during playback Stop [ Pause [ ] •• Press again to resume. Skip [ ] ][ ] Note •• To use this unit’s remote control/playback operation buttons with a Bluetooth® device, the Bluetooth® device must support AVRCP (Audio Video Remote Control Profile). Depending on the status of the device, some controls may not work. •• When enjoying video contents with this function, the video and audio output may not be synchronised. Disconnecting a Bluetooth® device 1 Press [MENU].
Automatically connects to the last connected Bluetooth® device “Auto Reconnect” This unit connects to the last connected Bluetooth® device automatically when switching the input source to “Bluetooth”. •• The factory default is “On”. 1 Press [MENU]. 2 Press [ ], [ ] repeatedly to select “Auto Reconnect” and then press [OK]. 3 Press [ ], [ ] to select “On” / “Off” and then press [OK].
Operations Using USB device You can connect a USB device to the unit and play back music stored on the USB device. •• Refer to “USB” (⇒ 123) for information about the USB device this unit can play back. USB device 1 Connect a USB device to the unit. 2 Press [USB] repeatedly to select “USB-A”. •• The folder/content selection screen will be displayed. 3 Press [ ], [ ] to select an item and then press [OK]. •• Repeat this step to make further selections. •• Press [RETURN] to return to the previous folder.
Repeat playback “Repeat” 1 Press [MENU]. 2 Press [ ], [ ] repeatedly to select “Repeat” and then press [OK]. 3 Press [ ], [ ] to select an item and then press [OK]. 1-Track: Repeatedly plays only the selected track. (“1 ” is displayed.) All: All tracks are repeated. (“ ” is displayed.) •• Setting contents are stored even when the input source is switched. Random playback “Random” 1 Press [MENU]. 2 Press [ ], [ ] repeatedly to select “Random” and then press [OK].
Add a track to playlist You can add your favourite track to playlist. 1 Press [ ], [ ] to select a track to add. 2 Press [MENU]. 3 Press [OK]. •• “Added” is displayed after adding. •• You can add up to 1000 tracks to playlist. Note •• The playlist cannot be played back properly with the other USB device except the registered one. When the content of USB device is changed or another USB device is connected, delete all tracks and add them again. •• The setting is deleted when AC mains lead is disconnected.
Operations Using digital audio output device You can connect a digital audio output device with coaxial digital cable (not supplied) or optical digital audio cable (not supplied) to this unit and play back music. Optical digital audio cable (not supplied) Coaxial digital cable (not supplied) Digital audio output device Connecting a digital audio output device 1 Disconnect the AC mains lead. 2 Connect this unit and a digital audio output device. 3 Connect the AC mains lead to this unit.
Note •• When enjoying video contents with this function, the video and audio output may not be synchronised. •• The digital audio input terminals of this unit can only detect the following linear PCM signals. For details, refer to the operating instructions of the connected device. Sampling frequency: Coaxial digital input 32/44.1/48/88.2/96/176.4/192 kHz Optical digital input 32/44.1/48/88.
Operations Using HDMI equipment When HDMI equipment supporting ARC (Audio Return Channel) function such as TV, etc. is connected with this unit using HDMI cable (not supplied), you can output the TV sound with this unit and also use HDMI CEC (Consumer Electronics Control) function such as “HDMI Selector Link”, “Power On Link”, etc. Connecting HDMI equipment with ARC function (TV, etc.) HDMI cable (not supplied) TV, etc.
Note •• Use Premium High Speed HDMI cables when connecting to peripheral devices. •• Connect this unit to the HDMI input terminal which has ARC function. •• Set the audio output from TV speakers to Off. •• Linear PCM signal is only available for ARC function. •• Do not input the signals other than linear PCM signal, otherwise it may cause noise or damage the connected speakers.
HDMI Selector Link Automatically switches the input source to “HDMI ARC” when CEC command is received from the connected TV using HDMI cable. 1 Press [SETUP]. 2 Press [ ], [ ] repeatedly to select “HDMI Selector Link” and then press [OK]. 3 Press [ ], [ ] to select “On” and then press [OK]. •• The factory default is “On”. HDMI Power On Link When the connected TV is operated (e.g. turning on, etc.), this unit is automatically turned on. 1 Press [SETUP].
HDMI ARC Set to “HDMI ARC” to receive the audio signal via HDMI input, or “TV (OPT2)” to receive the audio signal via optical digital input terminal. •• ”HDMI ARC” is not available for an input source and “TV (OPT2)” is displayed instead while “HDMI ARC” is set to “Off”. 1 Press [SETUP]. 2 Press [ ], [ ] repeatedly to select “HDMI ARC” and then press [OK]. 3 Press [ ], [ ] to select “On” / “Off” and then press [OK]. •• The factory default is “On”.
Operations Using PC, etc. You can connect the PC, etc. or another device with USB 2.0 cable (not supplied) to this unit and play back music. Type B Connector USB 2.0 cable (not supplied) Type A Connector PC, etc. ■■Preparation Connecting to a PC Before connecting to a PC, follow the steps below. Refer to the following for the recommend OS versions for your PC (as of February, 2023): Windows 8.1, Windows 10, Windows 11 macOS 10.12, 10.13, 10.14, 10.15, 11.0, 11.1, 11.2, 11.3, 11.4, 11.5, 12.1, 12.
Using USB 2.0 cable 1 Disconnect the AC mains lead. 2 Connect this unit and a PC, etc. 3 Connect the AC mains lead to this unit. (⇒ 27) 4 Press [ ]. 5 Press [USB] repeatedly to select “USB-B”. 6 Start playback using the application on the connected PC.
Operations Using analogue audio output device (LINE1/LINE2/PHONO) You can connect the turntable with PHONO cable (not supplied) or analogue audio output device with analogue audio cable (not supplied) to this unit and play back music. Analogue audio cable (not supplied) PHONO earth lead (not supplied) PHONO cable (not supplied) Turntable Analogue audio output device Note •• Tighten the PHONO earth terminal using a Phillips head screwdriver.
Using PHONO cable/ analogue audio cable 1 Disconnect the AC mains lead. 2 Connect this unit and a device. 3 Connect the AC mains lead to this unit. (⇒ 27) •• Turn the volume down before switching the input source. 4 Press [>INPUT<] repeatedly to select “LINE1”/”LINE2”/”PHONO”. 5 Start playback on the connected device.
Note •• While this unit is in “Pure Amplification” mode and the network functions, HDMI, etc. are disabled, playback of the online music streaming services, music files from network devices, etc. will not be available. Also, this unit is not displayed as the output speaker on the application such as “Technics Audio Center”. •• The disabled input source is not displayed while this unit is in “Pure Amplification” mode.
Operations Playing back music files on the media server You can share music files stored in the media server (PC, Network Attached Storage, etc.) connected to your home network, and enjoy the contents with this unit. ■■Preparation •• Complete the network settings. (⇒ 28) •• Connect the device to be used to the network of this unit. •• To use Windows Media® Player Add the contents and folder to the libraries of the Windows Media® Player 11 or 12, or a smartphone, etc.
Playing back content stored on the media server by controlling it from this unit 1 Press [>INPUT<] repeatedly to select “DMP”. •• You can also select the input source by turning the input selector knob on the unit. •• The server selection screen will be displayed. 2 Press [ ], [ ] to select a media server on the network, and then press [OK]. •• The folder/content selection screen will be displayed. Repeat this step to make further selections.
Repeat playback “Repeat” 1 Press [MENU]. 2 Press [ ], [ ] repeatedly to select “Repeat” and then press [OK]. 3 Press [ ], [ ] to select an item and then press [OK]. 1-Track: Repeatedly plays only the selected track. (“1 ” is displayed.) All: All tracks are repeated. (“ ” is displayed.) •• Setting contents are stored even when the input source is switched. Random playback “Random” 1 Press [MENU]. 2 Press [ ], [ ] repeatedly to select “Random” and then press [OK].
Playing back content stored on the media server by controlling it from a DMC By controlling a DMC (Digital Media Controller) compatible device, you can play back music stored on the media server on this unit (DMR—Digital Media Renderer). Operate the DMC compatible device and connect to this unit. •• The device name of this unit will be displayed as “Technics-SU-GX70-****”*1, 2. •• For details on how to use DMC compatible devices, refer to the operating instructions of the devices or the software.
Operations Playing Internet Radio and Podcasts This unit supports an audio broadcasting service transmitted via the Internet, and Internet Radio and Podcasts can be played back. ■■Preparation •• Complete the network settings. (⇒ 28) Make sure that the network is connected to the Internet. 1 Press [>INPUT<] repeatedly to select “Internet Radio” / “Podcasts”. •• You can also select the input source by turning the input selector knob on the unit.
Operations during playback Stop [ ] (Returns to the list.) Pause (Podcasts) [ ] •• Press again to resume. Skip [ Search (Podcasts) Press and hold [ ][ ] ] or [ ]. Repeat playback “Repeat” 1 Press [MENU]. 2 Press [ ], [ ] repeatedly to select “Repeat” and then press [OK]. 3 Press [ ], [ ] to select an item and then press [OK]. 1-Track: Repeatedly plays only the selected track. (“1 ” is displayed.) All: All tracks are repeated. (“ ” is displayed.
Random playback “Random” 1 Press [MENU]. 2 Press [ ], [ ] repeatedly to select “Random” and then press [OK]. 3 Press [ ], [ ] to select “On” and then press [OK]. •• “RND” is displayed. •• Random playback is not available for the content of “Internet Radio”. •• During random playback, you may not skip to the previous track. •• During random playback, tracks may be played more than once. •• Setting contents are stored even when the input source is switched.
Deleting the favourite station “Delete Favourites” 1 Press [ ], [ ] to select a station to delete from the favourite list. 2 Press [MENU]. 3 Select “Delete Favourites” and then press [OK]. 4 Press [ ], [ ] to select “Yes” and then press [OK]. •• “Deleted” is displayed after deleting. Operations using the dedicated app “Technics Audio Center” If you install the dedicated app “Technics Audio Center” (free of charge) on your tablet/smartphone, you can control this unit using a wide variety of functions.
Operations Playing audio using Spotify Connect This unit is compatible with Spotify Connect for the online music service (Spotify). ■■Preparation •• Complete the network settings. (⇒ 28) Make sure that the network is connected to the Internet. •• Connect the device to be used to the network of this unit. Use your phone, tablet or computer as a remote control for Spotify. Go to spotify.
Note •• The device name of this unit will be displayed as “Technics-SU-GX70-****”*1, 2. •• If the device name is set on the Google Home app or Apple Home app, the set name is displayed. •• Registration/subscription is required. •• Spotify Premium requires a usage charge. •• Services, icons, and specifications are subject to change. 1: * “****” stands for a number that is unique to each set. *2: The device name can be changed from “This unit’s name on the network”.
Operations Playing TIDAL You can play music from the music streaming service, TIDAL on this unit with the dedicated application “Technics Audio Center” (free of charge) on your smartphone, tablet, etc. For details of TIDAL, visit the following website. www.tidal.com ■■Preparation •• Install the latest “Technics Audio Center” on your device (smartphone, tablet, etc.). For details, visit: www.technics.
1 Press [>INPUT<] repeatedly to select “TIDAL”. •• You can also select the input source by turning the input selector knob on the unit. •• When “Operate via App” is displayed, use the dedicated app “Technics Audio Center” for operating. •• The playback operation screen is displayed when you have played back TIDAL before. 2 Press [ ], [ ] to select an item and then press [OK]. •• Repeat this step to make further selections. •• Press [RETURN] to return to the previous folder.
Random playback “Random” 1 Press [MENU]. 2 Press [ ], [ ] repeatedly to select “Random” and then press [OK]. 3 Press [ ], [ ] to select “On” and then press [OK]. •• “RND” is displayed. •• During random playback, you may not skip to the previous track. •• Setting contents are stored even when the input source is switched. Adding a track/album/artist, etc. to favourite list “Add Favourites” 1 Press [ ], [ ] to select a content to add and then press [OK]. •• Repeat this step to make further selections.
Deleting the track/album/artist “Delete Favourites” 1 Press [ ], [ ] to select a content to delete from the favourite list. 2 Press [MENU]. 3 Select “Delete Favourites” and then press [OK]. 4 Press [ ], [ ] to select “Yes” and then press [OK]. •• “Deleted” is displayed after deleting. Operations using the dedicated app “Technics Audio Center” You start the playback using “Technics Audio Center” on your tablet/smartphone.
Operations Playing Deezer You can play music from the music streaming service, Deezer on this unit with the dedicated application “Technics Audio Center” (free of charge) on your smartphone, tablet, etc. For details of Deezer, visit the following website. www.deezer.com ■■Preparation •• Install the latest “Technics Audio Center” on your device (smartphone, tablet, etc.). For details, visit: www.technics.
1 Press [>INPUT<] repeatedly to select “Deezer”. •• You can also select the input source by turning the input selector knob on the unit. •• When “Operate via App” is displayed, use the dedicated app “Technics Audio Center” for operating. •• The playback operation screen is displayed when you have played back Deezer before. 2 Press [ ], [ ] to select an item and then press [OK]. •• Repeat this step to make further selections. •• Press [RETURN] to return to the previous folder.
Random playback “Random” 1 Press [MENU]. 2 Press [ ], [ ] repeatedly to select “Random” and then press [OK]. 3 Press [ ], [ ] to select “On” and then press [OK]. •• “RND” is displayed. •• During random playback, you may not skip to the previous track. •• Setting contents are stored even when the input source is switched. Adding a track/album/artist, etc. to favourite list “Add Favourites” 1 Press [ ], [ ] to select a content to add and then press [OK]. •• Repeat this step to make further selections.
Deleting the track/album/artist “Delete Favourites” 1 Press [ ], [ ] to select a content to delete from the favourite list. 2 Press [MENU]. 3 Select “Delete Favourites” and then press [OK]. 4 Press [ ], [ ] to select “Yes” and then press [OK]. •• “Deleted” is displayed after deleting. Operations using the dedicated app “Technics Audio Center” You start the playback using “Technics Audio Center” on your tablet/smartphone.
Operations Playing Amazon Music You can play music from the music streaming service, Amazon Music on this unit with the dedicated application “Technics Audio Center” (free of charge) on your smartphone, tablet, etc. For details of Amazon Music, visit the following website. www.amazonmusic.com ■■Preparation •• Install the latest “Technics Audio Center” on your device (smartphone, tablet, etc.). For details, visit: www.technics.
1 Press [>INPUT<] repeatedly to select “Amazon Music”. •• You can also select the input source by turning the input selector knob on the unit. •• When “Operate via App” is displayed, use the dedicated app “Technics Audio Center” for operating. •• The playback operation screen is displayed when you have played back Amazon Music before. 2 Press [ ], [ ] to select an item and then press [OK]. •• Repeat this step to make further selections. •• Press [RETURN] to return to the previous folder.
Random playback “Random” 1 Press [MENU]. 2 Press [ ], [ ] repeatedly to select “Random” and then press [OK]. 3 Press [ ], [ ] to select “On” and then press [OK]. •• “RND” is displayed. •• During random playback, you may not skip to the previous track. •• Setting contents are stored even when the input source is switched. Operations using the dedicated app “Technics Audio Center” You start the playback using “Technics Audio Center” on your tablet/smartphone.
Operations Playing Qobuz You can play music from the music streaming service, Qobuz on this unit with the dedicated application “Technics Audio Center” (free of charge) on your smartphone, tablet, etc. For details of Qobuz, visit the following website. www.qobuz.com ■■Preparation •• Install the latest “Technics Audio Center” on your device (smartphone, tablet, etc.). For details, visit: www.technics.
1 Press [>INPUT<] repeatedly to select “Qobuz”. •• You can also select the input source by turning the input selector knob on the unit. •• When “Operate via App” is displayed, use the dedicated app “Technics Audio Center” for operating. •• The playback operation screen is displayed when you have played back Qobuz before. 2 Press [ ], [ ] to select an item and then press [OK]. •• Repeat this step to make further selections. •• Press [RETURN] to return to the previous folder.
Random playback “Random” 1 Press [MENU]. 2 Press [ ], [ ] repeatedly to select “Random” and then press [OK]. 3 Press [ ], [ ] to select “On” and then press [OK]. •• “RND” is displayed. •• During random playback, you may not skip to the previous track. •• Setting contents are stored even when the input source is switched. Adding a track/album/artist, etc. to favourite list “Add Favourites” 1 Press [ ], [ ] to select a content to add and then press [OK]. •• Repeat this step to make further selections.
Deleting the track/album/artist “Delete Favourites” 1 Press [ ], [ ] to select a content to delete from the favourite list. 2 Press [MENU]. 3 Select “Delete Favourites” and then press [OK]. 4 Press [ ], [ ] to select “Yes” and then press [OK]. •• “Deleted” is displayed after deleting. Operations using the dedicated app “Technics Audio Center” You start the playback using “Technics Audio Center” on your tablet/smartphone.
Operations Listening to music using Chromecast-enabled app This unit is compatible with Chromecast-enabled apps. For detailed information of Chromecastenabled apps, visit: g.co/cast/apps ■■Preparation •• Complete the network settings. (⇒ 28) Make sure that the network is connected to the Internet. •• Install a Chromecast-enabled app on your device (smartphone, tablet, etc.). •• Connect the device to the network currently used at home.
Operations Using AirPlay You can play back music stored on iOS device, etc. using AirPlay. ■■Preparation •• Complete the network settings. (⇒ 28) •• Connect the iOS device or PC to the same network as this unit. 1 (iOS device) Start the “Music” (or iPod) app. (PC) Start “iTunes”. 2 Select “Technics-SU-GX70-****”*1, 2 from ). the AirPlay icon (e.g. •• If the device name is set on the Google Home app or Apple Home app, the set name is displayed. 3 Start play.
Operations during playback Pause [ ][ •• Press [ Skip [ View available information [INFO] •• Press repeatedly to switch the information. ][ ] ] again to resume. ] •• You can also operate on the connected iOS device/PC. Note •• Volume changes on the iOS device or iTunes will apply to this unit. (Refer to the iTunes Help for the required settings in iTunes.) •• Playback of other audio sources will stop and AirPlay output will have priority.
Settings Sound adjustment................................ 96 Adjusting BASS/TREBLE “Tone Control”........................................... 96 Adjusting balance of speakers “Balance L/R”............................................ 96 Adjusting the sound quality according to the installation location “Space Tune”............................................. 97 Other settings....................................... 98 Sleep timer “SLEEP”......................................................
Decoding MQA source....................... 106 MQA decoding........................................ 106 Using the favourite function (FAV).... 107 Registering your favourite station, music or playlist to [FAV]...........................107 Calling up the favourite station, music or playlist.........................................107 Deleting the favourite station, music or playlist........................................ 108 Operations using the dedicated app “Technics Audio Center”.......................
Settings Sound adjustment 1 Press [SETUP]. 2 Press [ ], [ ] repeatedly to select the menu and then press [OK]. 3 Press [ ], [ ], [ ], [ ] to set, and press [OK]. Adjusting BASS/TREBLE “Tone Control” You can adjust the tone of this unit. Each tonal range (BASS/TREBLE) can be adjusted. •• To enable this function, select “On (adjustment)”. •• Each level can be adjusted between “- 10” and “+ 10”. •• “TONE” is displayed after setting. •• The factory default is “Off”.
Adjusting the sound quality according to the installation location “Space Tune” You can adjust the sound quality according to the installation location (near the wall or the corner of the room). •• The factory default is “Free”. Free: No objects (wall, etc.) around the speakers. Wall: There is a wall behind the speakers. Corner: There are speakers at the corner of the room. In a Shelf: There are speakers in the shelf. L/R Custom: Sets the sound quality for each speaker.
Settings Other settings 1 Press [SETUP]. 2 Press [ ], [ ] repeatedly to select the menu and then press [OK]. 3 Press [ ], [ ], [ ], [ ] to set, and press [OK]. Sleep timer “SLEEP” The sleep timer can turn the unit to standby mode after a set time. (30 minutes/60 minutes/ 90 minutes/120 minutes/Off) •• “SLEEP” is displayed after setting. •• The sleep timer will be cleared in the following condition.
Note •• The setting is stored even if the power is turned off and on. •• “Auto Off” is displayed 3 minutes before this unit is turned off. Auto dimming function “Auto DIMMER” While the setting is set to “On”, this unit temporarily adjust the brightness of the display, power indicator, etc., if no sound output without operation such as pressing buttons, etc. for approx. 20 minutes. •• The factory default is “On”.
Network standby “Standby Mode” When this function is set to “On”, then this unit automatically turns on in the following cases. When a Bluetooth® connection is established to this unit from a paired Bluetooth® device. When playback operations are performed on this unit from a device connected to the network. •• The factory default is “On”. To disable this function, select “Off”. •• This setting is not displayed while the network function is disabled.
Changing the character encoding “E Asian Character” You can change the character encoding of track names, artist names and other information when they are not displayed as they should be. Type 1(日本): Priority is given to Japanese. (default) Type 2(简体字): Priority is given to Chinese (Simplified). Checking the model name “Model No.” The model name is displayed. Checking the firmware version “F/W Version” The version of the installed firmware is displayed.
Update via Internet ■■Preparation •• Connect this unit to the network. (⇒ 28) Make sure that the network is connected to the Internet. 1 Press [SETUP]. 2 Press [ ], [ ] repeatedly to select “F/W Update” and then press [OK]. 3 Press [ ], [ ] to select “Internet” and then press [OK]. 4 Press [ ], [ ] to select “Yes” and then press [OK]. •• The progress is displayed as “Updating %” while updating. (“ ” stands for a number.) •• When the update has finished successfully, “Success” is displayed.
6 Press [ ] on the unit to turn this unit off and on. Note •• Downloading may take longer depending on the USB flash memory.
Settings Using output correction function (LAPC) You can make the optimum adjustment according to your own speakers. Measuring the output signal of the amplifier and correcting its output (LAPC) ■■Preparation •• Disconnect the headphones. •• Set “PRE OUT” to “Off”. Test tone emitted during measurement To ensure the measurement accuracy, the speakers output a test tone at regular intervals.
■■Turning on/off the output correction function 1 Press [SETUP]. 2 Press [ ], [ ] to select “LAPC” and then press [OK]. 3 Press [ ], [ ] to select “On”/“Off” and then press [OK]. Note •• The setting status of LAPC is displayed by pressing and holding [INFO]. •• Set to “Off” when using output correction function for the connected speakers because the correction function (LAPC) effects on the audio output from PRE OUT terminal.
Settings Decoding MQA source MQA decoding This unit includes the MQA (Master Quality Authenticated) technology, which enables playback of MQA audio files and streams, delivering the sound of the original master recording. The built-in MQA decoder will restore the highresolution signal heard in the studio and confirm it, using the authentication signature. Visit www.mqa.co.uk/customer/mqacd for more information. •• “MQA” is displayed while MQA content is played back. •• MQA content type (MQA Studio, etc.
Settings Using the favourite function (FAV) Registering your favourite station, music or playlist to [FAV] You can register your favourite station, music or playlist (DAB/DAB+ / FM / USB-A / DMP / Internet Radio / Spotify / TIDAL / Deezer / Amazon Music / Qobuz, etc.) and call up the station easily by pressing [FAV]. 1 Switch the input source (DAB/DAB+ / FM / USB-A / DMP / Internet Radio / Spotify / TIDAL / Deezer / Amazon Music / Qobuz, etc.).
Note •• If the station or playlist cannot be found after the input source is switched, playback does not start or other music may play back. Deleting the favourite station, music or playlist 1 Press [FAV]. 2 Press [ ], [ ] repeatedly to select a favourite number to delete and then press [CLEAR]. 3 Press [ ], [ ] repeatedly to select “Yes” and then press [OK]. •• “Cleared” is displayed after deleting. •• “Empty” is displayed if no station or playlist is registered to the favourite list.
Settings Connecting a power amplifier, subwoofer, etc. You can connect the power amplifier, subwoofer, etc. with analogue audio cable (not supplied) to output the analogue audio signals. Analogue audio cable (not supplied) Power amplifier, Subwoofer, etc. Do not input the audio signal from PRE OUT terminals to the analogue audio input terminals of this unit. Doing so may cause malfunction. Using analogue audio cable 1 Disconnect the AC mains lead.
Setting the audio output (PRE OUT) You can set the audio output of the speaker output terminals and PRE OUT terminals. 1 Press [SETUP]. 2 Press [ ], [ ] repeatedly to select “PRE OUT” and then press [OK]. 3 Press [ ], [ ] to select the output setting and then press [OK]. •• The factory default is “Off”. On: Sound is output from the speaker output terminals and PRE OUT terminals. On (Speaker: Off): Sound is not output from the speaker output terminals. Sound is output from PRE OUT terminals.
Others Troubleshooting...................................112 Heat buildup of this unit............................ 112 Do you have the latest firmware installed?.................................................. 112 To restore all the settings to the factory defaults..................................................... 112 General..................................................... 113 Radio........................................................114 USB.....................................................
Others Troubleshooting Before requesting service, make the following checks. If you are uncertain about some of the check points, or if the solutions indicated in the following guide do not resolve the issue, then consult your dealer for instructions. Heat buildup of this unit This unit becomes warm while in use. •• Be careful when touching the bottom of this unit because the bottom of this unit may be hot. For installation or unit care, disconnect the AC mains lead, wait for at least 3 minutes.
General The unit does not work. Operations are not done properly. •• One of the unit’s safety devices, etc. may have been activated. Press [ ] on the unit to switch the unit to standby. •• If the unit does not switch to standby, press [ ] on the unit for at least 5 seconds. The unit is forcibly switched to standby. Alternatively, disconnect the AC mains lead, wait for at least 3 minutes, then reconnect it. Press [ ] on the unit to switch on. (It may take some time for this unit to be turned on.
Playback does not start. •• Depending on your environment or connected devices, it may take some time. •• Playback of multi-channel content is not supported. •• Check to see if the format of the file is supported. For supported formats, refer to “Format”. (⇒ 131) The unit turns to standby mode automatically. •• Is the auto off function turned on? (⇒ 98) •• When using HDMI CEC (Consumer Electronics Control) function, this unit may turn to standby mode according to the connected HDMI equipment.
USB The USB drive or its contents cannot be read. •• The USB drive format or its contents is/are not compatible with the unit. (⇒ 123) •• The USB drive may not be read which has the files/ folders with the long names, even if the number of the files/folders of the USB device doesn’t reach a maximum number (⇒ 130). •• The USB connection is not available when “Pure Amplification” is set to “On” or “Network/ USB-A/Bluetooth” is set to “Disabled”. Set “Pure Amplification” to “Off”.
Bluetooth® Pairing cannot be completed. •• Check the Bluetooth® device condition. •• The Bluetooth connection is not available when “Pure Amplification” is set to “On” or “Network/ USB-A/Bluetooth” is set to “Disabled”. Set “Pure Amplification” to “Off”. (⇒ 64) The device cannot be connected. •• The pairing of the device was unsuccessful or the registration has been replaced. Try re-pairing the device. (⇒ 48) •• This unit might be connected to a different device.
Network Cannot connect to the network. •• Confirm the network connection and settings. (⇒ 28) •• If the network is set to be invisible, make the network visible while you set up the network for this unit or make a wired LAN connection. •• This system’s Wi-Fi security supports WPA2™. Your wireless router must therefore be WPA2™ compatible. For details on the security supported by your router and how to change the settings, please refer to the operating instructions or contact your internet service provider.
Playback does not start. The sound is interrupted. •• The content may not be played back properly depending on the network condition. •• If using the 2.4 GHz band on the wireless router, simultaneous use with other 2.4 GHz devices, such as microwaves, cordless telephones, etc., may result in connection interruptions. Increase the distance between this unit and these devices. If your wireless router supports 5 GHz band, try using the 5 GHz band.
Online music streaming services Playback does not start. The sound is interrupted. •• The station that does not broadcast cannot be played back (or it will be skipped). •• The internet radio station may not be played back depending on the broadcasting method or the network condition. •• The content may not be played back properly depending on the network condition. •• Depending on the internet connection environment, the sound may be interrupted or it may take some time to play back.
Remote control The remote control does not work properly. •• The batteries are depleted or inserted incorrectly. (⇒ 21) •• To avoid interference, please do not put any objects in front of signal sensor. (⇒ 17) •• If the remote control mode of the remote control differs from that of this unit, match the mode of the remote control to the mode of this unit. (⇒ 21) Messages Auto Off The unit has been left unused for about 20 minutes and will shut down within a minute. (⇒ 98) Press any button to cancel it.
Empty The selected folder is empty. •• Move tracks into the folder and retry the operation. The server is not found on the network. •• Check to see if the server is connected to the same network as this unit, and retry the connection to this unit. (⇒ 28) No station, track, etc. is registered to the favourite list or playlist. •• Add a station or track to the list. (⇒ 54, 107) Error Incorrect operation is performed. •• Read the instructions and try again. Fail Network connection is not complete.
No Network Available This unit is not connected to the network. •• Check the network connection. (⇒ 28) Not Measured •• Measuring the output signal for the output correction function (LAPC) has not been done yet. •• Measure the output signal. (⇒ 104) Not Valid The function you have tried to use is not available with the current settings. •• Check the steps and settings. •• Registration/subscription may be required for some functions.
Others Playable media USB •• This unit does not guarantee connection with all USB devices. •• FAT16, FAT32 and NTFS file systems are supported. •• This unit supports USB 2.0 high speed. •• USB devices may not be recognised by this unit when connected using the following: a USB hub a USB extension cable •• It is not possible to use USB card reader/writers. •• This unit cannot record music to a USB device. •• Not all files on the USB device may be read if there are some files not supported.
Others About Bluetooth® Panasonic bears no responsibility for data and/ or information that is compromised during a wireless transmission. Frequency band used •• This system uses the 2.4 GHz frequency band. Certification of this device •• This system conforms to frequency restrictions and has received certification based on frequency laws. Thus, a wireless permit is not necessary. •• The actions below are punishable by law in some countries: Taking apart or modifying the system.
Others Licenses The Wi-Fi CERTIFIED™ Logo is a certification mark of Wi-Fi Alliance ®. The Wi-Fi Protected Setup™ Logo is a certification mark of Wi-Fi Alliance ®. Use of the Works with Apple badge means that an accessory has been designed to work specifically with the technology identified in the badge and has been certified by the developer to meet Apple performance standards. Apple and AirPlay are trademarks of Apple Inc., registered in the U.S. and other countries.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Panasonic Holdings Corporation is under license. Other trademarks and trade names are those of their respective owners. “DSD” is a registered trademark.
The terms HDMI, HDMI High-Definition Multimedia Interface, Premium HDMI, Premium High Speed HDMI Cable, Premium High Speed HDMI Cable with Ethernet, and HDMI Trade Dress, the HDMI Logos, Premium HDMI Cable Certification Label and Premium HDMI Cable Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Others Specifications ■■GENERAL Power supply AC 220 V to 240 V, 50/60 Hz Power consumption 63 W Power consumption in standby mode (Network standby On) Approx. 2.0 W Power consumption in standby mode (Network standby Off) Approx. 0.5 W Dimensions (W×H×D) 430 mm × 98 mm × 368 mm Mass Approx. 6.6 kg Operating temperature range 0 °C to 40 °C Operating humidity range 35% to 80% RH (no condensation) ■■AMPLIFIER SECTION Output power 40 W + 40 W (1 kHz, T.H.D. 1.
■■TUNER SECTION Frequency Modulation (FM) Preset memory 30 stations Frequency range 87.50 MHz to 108.00 MHz (50 kHz step) Antenna terminals 75 Ω (unbalanced) DAB DAB memories 20 channels Frequency band (wavelength) Band III (All Band III): 5A to 13F (174.928 MHz to 239.200 MHz) Sensitivity BER 4x10 -4 Min requirement: –98 dBm DAB external antenna terminal F-Connector (75 Ω) ■■Bluetooth® SECTION Bluetooth® system specification Bluetooth® Ver.5.
■■TERMINALS SECTION Headphones Jack Stereo, φ6.3 mm 5 mW, 32 Ω (VOL MAX) USB-A (Front) Type A Connector Support Memory Capacity 2 TB (max) Maximum number of folders (albums) 800 Maximum number of files (songs) 8000 File system FAT16, FAT32, NTFS USB port power DC OUT 5 V 0.
■■Format This unit supports the following formats. •• This unit does not support the playback of copyprotected music files. •• Playback of all files in formats supported by this unit is not guaranteed. •• Playback of a file in a format not supported by this unit may cause choppy audio or noise. In such cases, check to see if this unit supports the file format. •• This unit does not support VBR (Variable Bit Rate) playback.
DSD .dff .dsf 2.8/5.6/ 11.2 MHz 32/44.1/48/ 88.2/96/ 176.4/192/ 352.8/384 kHz LPCM Bit rate/ Number of quantisation bits Sampling frequency Extension USB-B 16/24/32 bit Bit rate/ Number of quantisation bits Sampling frequency Extension LAN (DMR)*2 MP3 .mp3 32/44.1/ 48 kHz 16 to 320 kbps AAC .m4a .aac 32/44.1/48/ 88.2/96 kHz 16 to 320 kbps .wav 32/44.1/48/ 88.2/96/ 176.4/192/ 352.8/384 kHz 16/24/32 bit .flac 32/44.1/48/ 88.2/96/ 176.4/192/ 352.8/384 kHz 16/24 bit .aiff 32/44.
Note •• Specifications are subject to change without notice. •• Mass and dimensions are approximate.
EU Importer for UK: Panasonic UK, a branch of Panasonic Marketing Europe GmbH Maxis 2, Western Road, Bracknell, Berkshire, RG12 1RT Headquarter Address: Panasonic Corporation 1006 Oaza Kadoma, Kadoma City, Osaka 571-8501, Japan Authorized Representative in Europe: Panasonic Marketing Europe GmbH Panasonic Testing Centre Winsbergring 15, 22525 Hamburg, Germany Panasonic Corporation Web Site: https://www.panasonic.
