Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully, These operating instructions are applicable fo the SL-PGSY0, SLPG480 and $L-PG320 models. These operating instructions, however, fundamentally explain the operation of SL-PGS80 model. Caution for AC mains lead . Cervantes, @ Suggestions for satiety 4 Connections «..c.ovvws i, 5 Concerning the resole control 5 CONFORMISM .. vvascncannnsinnncaronsircrce 6 Sequential play SRR .
(For United Kingdom) (“EB” earn code model only) For your safely, please read the following text carefully. This appliance is supplied with a molded three pin mains plug for your safety and convenience. A 5-ampere fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of B-ampere and that it is approved by PASTA or BSI to BS1362. Check for the PASTA mark & or the BSI mark § on the body of the fuse.
Avoid placing the unit in areas of: *direct sunlight *high temperature *high humidity *excessive vibration +uneven surfaces (Place the unit on a flat level surface) Such conditions might damage the cabinet and/or other component pairs and thereby shorten the unit's service life. To protect the unit against sound distortion and acoustical effects, please place the unit al least 16 om away trim wail surfaces ete.
— Dust-protection cap ) To household AG loutish [ For United Kingdom: BE SURE TO READ THE CAUTION FOR THE AC ! MAINS LEAD ON PAGE 3 BEFORE CONNECTING. Optical-fiber cable (not included) insert the batteries In the correct polarities (D, (UM-PARA 03} S5t About 7 meters in front of the signal sensor Before making corrections, be sure that the power of this unit and all other system components is first turned off.
2 fifteen ration Tightrope © 3 A [matey Technicians J N | Main unit B D Power “STANDBY (5/ON” switch {POWER, STANDBY Press to switch the unit from on to standby mode of vies versa. In starry mode. the unit is still consuming & small amount of power. @ Standby indicator (STANDBY) When the unit Is connected to the AC mains supply, this indicator lights up in standby mode and goes out when the unit is muted on.
e [or mm s e i STRIATION Track currently playing Index umber i POWER TRACK INGE Total number of tracks Total playing time. Elapsed time 2 of Fl Press POWER (Power goes on). < no dis C * indicates that a OD has not bun inserted. o1t 2 CD is already in the disc tray, it automatically begins playing from the first track, E Press A OPEN/CLOSE to open the tray and insertions. E Crass & OPEN/CLOSE 1o close the tray. Press P (Play begins).
ISL-PG480] EIGHTIETH PROGRAM _CLEAR 3 ERR ) @ roomy Last track number programmed | ISL-PGAg0] D Total playing time of programmed tracks With this function, you can program up to 20 tracks in any order you fiche. While the disc is stopped: Press PROGRAM. it the button is pressed while the disc is playing, that track is programmed as the first. fl Select the track to be programmed. Press the numeric buttons to specify the track numbers in order.
[(sLPG3anH] ] PROGRAM_ CLEAR Proletarian Aron FRACK THO EX. bt TR TERR i Checking program contents Press RECALL. Each firm the button is pressed, a track number and sequence number are displayed. To program additional tracks Crass the numeric buttons. [SLFG400l While the disc is stopped: Cross or week and then pres PROGRAM. To erase programmed tracks *7T0 erase tha last programmed track Whigs he disc is stopped: Press CLEAR. One track is erased each ime the button is pressed.
e DEFEAT { 4 [Bl-pea i indicates that output level has been decreased Playback of afl tracks or desired tracks will be repeated. Press REPEAT before or during play. To cancel repeat Crass REPEAT, To repeat only one track or specific tracks (D Specify the track numbers. Perform steps 1 and 2 on page 8. @ Press REPEAT. @ Crass . s reps [SLFG490 {Available only from the remote control) White & dies is playing, if you specify a start point (point A} and an end point (point B), that segment will be repeated.
: Thee FADE ® TRAD INDEX N ARG 14006 () (Original state) Elapsed time of track being played @ Time remaining on disc @ Elapsed time of entire disc FRACK, & INGE WiN SEC, : o 35J T With this function you spicily a time, and when that lime is reached, ihe volume is gradually decreased and playback ends. While the disc is stopped or paused: Press TIME FADE. Press the numeric buttons to specify the playback time.
PERIGEE ABANDON, G KO0 P Picasso) SL.PG4B0; With this function, playback is paused at the beginning {where sound can be heard) of all tracks, one track st a time. | Press Au To CUE. if the disc was playing, payback is paused at the beginning of the next track. fl Press 4d/«« or 1o select the track number and then press », The unit switches to the play standby mode. [8-PGad0] B To select the track number with the numeric buttons. Press the numeric buttons. an, intermediately switches to the play standby mode.
GO edit receding is a function which allows you to specify a tape tenth and then automatically performs editing such that no tracks get cut off at the end of the tape. With this function, an Interval is automatically added between tracks i an interval doesn't already exist. This is sc tape search functions that use 4 second intervals o find the beginnings of tracks will work correctly. (auto space function) “ Prepare the cassette deck. 1. Wind the leads tape and Insert the tape. 2. Select noise reduction.
e STEFANIE SRR -%5&1 fi!& | To add tracks in the extra space on the gape Bl ‘ After step 2 on page 13, press the numeric buttons to specify the track number. (See page 8 When & minus sign appears on the display, i indicates that the time remaining on the taps s insufficient, To fade out at the end of the tape when the minus sign is displayed Press TIME FADE.
T How to return CDs fo their case e Fee label upwards and ~ press downward from above. How to hold COs Do not touch the recorded surface. How to clean CDs With this system, you can only play COs COMPACT having this mark. However, do not use regular shape COs {heart-shape, octagonal, et6.). CDs of the DISTAL AUDIT sort can damage the unit. [ Handling precautions [ Be sur 1o handle CDs according to the precautions shown on the left { A [B). Failure to do so may damage the CD or the unit.
Ba fore requesting service far this unit, check the char below for a possible cause of the problem you are experiencing. Some s minor adjustment on your part may eliminate the problem and restore proper operation If you are in doubt about some of the check points, o it the remedies indicated in the chart do not solve the prob impel sacks of & lem, refer to the directory of Authorized Service Centers {enclosed with this unit) to locate a convener service center, or consult your dealer for instructions.
