Before use . s ROTARY Cautions concerning the moving of this unit Be fora moving the changer to another location, be sure to carry out the “Preparations for moving the unit* described below. Failure to do so will expose the compact sides and the changer 10 the risk of severe damage. Preparations for moving the unit Al of the sides must be removed so that the frays are completely empty. Uss the following procedure, (@ Crass [/ to switch off the uni.
(For United Kingdom) {"EB” area code model only) For your safety, please read the following text carefully. This appliance is supplied with a molded three pin mains plug for your safety and convenience, A 5-ampere fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5-ampere and that it is approved by PASTA or BSI to B31362. Check for the PASTA mark & or the BSI mark § on the body of the fuse.
Before use . 4 RQT4757 Av old placing the unit in areas of: distract sunlight #high temperature #high humidity *excessive vibration uneven surfaces (Place the unit on a Hat levee surface ) Such conditions might damage the cabinet and/or other competent parts and thereby shorten the unit's service life. To protect the unit against scud distortion and acoustical effects, pleas place the unit at slats 15 om away from wall surfaces etc.
This uric sy To household AC loutish Receiver (not included) §: Q Optical-fibre cable (ot included) This unit i Remote control signal sensor Before making connections, be sure that this unit and all other system components are fumed off. B Stereo connection cable (included) white (L) Red (R} {For United Kingdom only) BE SURE TO READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 3 BEFORE THE FOLLOWING CONNECTIONS.
s DT DECEIVE 3003 o secs G Q00 REFRESH h HOTTEST o ‘ Main unit [ No. Name Ref.page ® Standby/on SWATHE {O/) v ermmrcecomeeccrnires 7 Standby/on switch (U7, POWER) Press {6 switch the unit from o0 1o standby mode or vice versa. in standby mode, the unit is steel consuming a small amount of power.
All of the discos wife be played, beginning from track 1 on the selected disc. The explanation below is an example of operation in the case where all five disc trays in the changer are holding CDs. n Press The unit will swish on. fl Press [CLOSENESS] to open the loading drawer. Eor United Kingdom For others . B Load the disc(s) on the disc tray(s). = o1t POWER The discs can be loaded two at a time by pressing [DISC ] SKIP] 1o rotate the carousel.
Operations . AQTA75? [ e Track number To directly access a desired track B Press the numeric butternuts) to select the track. To select a quo-digit track number over 10 (or to select & two-digit track from the remote control for SLIDE) Press [>10] {{210] on the remote control for SL-FDB) and then the wo numbers you want within 7 seconds or sa. For example Track no.
All of the tracks will be played one time each in random larder, Thea are two types of random play as described below, One disc random play The changer will pay ali racks on the current disc in a random order. Than it will choose a new disc randomly, excluding the discs already played, and play all tracks on that disc in a random order. In the stop or play mode Press [RANDOM MODE] so that the “1 DISC RND” indicator illuminates.
Operations . P e RQT47ST Specified track number Program ceder This unit has two program play modes; program (PGM) and elate (DEL). Program mode mafioso you 1o select and play your favorite fracks in the order you want ta hear them. Delete mode allows you to program the unit not to play certain tracks. This mode can be used in combination with sequential and random play. Up to 32 tracks can be selected for each mode. White the unit is stopped Select the mode with [PROGRAM MODE].
Programmed Programmed track order A (Re mots control only} To confirm the selections Press [RECALL]. Each time you press the button, the tracks and discs you programmed appear on ths display in the order they wer selected To cancel selections While the unit Is stopped Press [M]. The entire program Is canceled. (Remote control only) To clear the last item in the program [ Crass [CLEAR Ta clear a specific item 1. Press [RECALL] until the item is displayed. 2.
Disc number at the paying position Operations Track number at the playing position ; 1 RQT4757 To skip discs Use this function to skip discs when selecting a disc to which you wish ta fasten, and when loading and unloading the discs. You can use this function in stop, sequential play, one disc random play and delete play modes. Press [DISC SKIP] to rotate the dies tray. In stop mode When the loading drawer is closed, pressing [DISC SKIP] changes he disc tray to the next one.
~m (D) Track number and lapsed play time of the current track @ Track number and remaining time of the current track. Play will continue endlessly in accordance with the specific play mode selected. Before or during play Press [REPEAT], In sequential play mode All tracks of ali discs wiki be played repeatedly. in program play mode The changer plays only the programmed selections in the programmed sequence repeatedly.
Operations . Example: Recording from a disc containing seven tracks onto a 80-minute tape. Spittoon interval between tracks {approx.
How to clean CDs. O @ Wipe from inside outward, With this changer, you can only play compass discs haying this mark, MDSE DIGITAL AUDIO However, do not use irregular shaped CDs. CDs of the sort can damages the unit Handling precautions B-@ ®ff you are taking the CD from a cold to a wam environment, moisture may form on the CO. Wipe this off with & fast, dry, lint free cloth before using the CD. «Do not write on the fable side with a lab-point pen or other writing instrument.
Ba tore requesting service for this unit, heck the chart below for a possible cause of the problem you ars experiencing. Some simple checks of amino adjustment on your part may eliminate the problem and restate proper operation.
