Datasheet

SafetyRelaysSF-YRELAYS
■ UL/C-UL(Recognized)
File No. Contact rating Operations
Ambient
temperature
E120782
6 A 250 V AC, general use 100 x 10
3
70℃
6 A 30 V DC, general use 100 x 10
3
70℃
B 300, R 300 ( Pilot duty ) − −
■ TÜV(Certified)
File No. Contact rating Operations
Ambient
temperature
968/EZ 535.00/12
6 A 230 V AC
( cosφ = 1.0 ) resistive
100 x 10
3
70℃
6 A 24 V DC
( cosφ = 1.0 ) resistive
100 x 10
3
70℃
Note) Forcibly guided contact structure EN5025 ( Type A ) standard certified by
TÜV.
■ CSA(Certified)
CSA standard certified by CUL
GUIDELINES FOR USAGE
■
Forcautionsforuse,pleaseread"GUIDELINESFORRELAYUSAGE".
https://industrial.panasonic.com/ac/e/control/relay/cautions_use/index.jsp
■ CautionsforuseSF-Yrelays
● Coildrivepowersupply
Pure DC current should be applied to the coil. If it includes
ripple, the ripple factor should be less than 5%. However,
check it with the actual use since the characteristics may
be slightly different. Also, the power wave form should be
rectangular.
● Connectionofcoil
The positive ( + ) and negative (  ) connections of
polarized relay to the coil should be done as indicated on
the schematic diagram. If connected incorrectly, it may
malfunction, abnormal heat, fire or fail to operate.
● Soldering
When using automatic soldering, the following conditions
are recommended
1 ) Preheating: 120℃, within 120 sec
2 ) Soldering: 260 ±5℃, within 6 sec
SAFETY STANDARDS
Each standard may be updated at any time, so please check our Website for the latest information.
ASCTB317E 202204
Panasonic Industry Co., Ltd. Electromechanical Control Business Division
industrial.panasonic.com/ac/e/
Panasonic Industry Co., Ltd. 2022
ー 7 ー