LSQT1212_T.CH.book 1 ページ ２００７年２月９日 金曜日 午後２時５１分 使用說明書 Operating Instructions SD 卡／硬碟 攝錄放影機 SD Card/Hard Disk Video Camera SDR-H250GC SDR-H21GC SDR-H20GC Model No. ≥ 圖例說明的是 SDR-H250。 ≥ SDR-H20 型沒有視頻照明。 ≥ The illustration shows SDR-H250. ≥ SDR-H20 does not have a video light. 使用前，請完整閱讀本說明書。 Before use, please read these instructions completely.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.book 4 ページ ２００７年２月９日 目錄 安全注意事項............................................ 2 使用之前 特點 .......................................................... 6 附件 .......................................................... 8 部件的識別和操作 .................................... 8 使用 LCD 顯示屏 ...................................... 11 使用遙控器 (SDR-H250)........................... 11 硬碟和 SD 卡 .......................................... 13 關於內置硬碟和本機可以使用的記憶卡 ....13 關於 SD 卡................................................
LSQT1212_T.CH.book 5 ページ ２００７年２月９日 金曜日 午後２時５１分 與其他產品一起使用 與電視機一起使用 ..................................65 在電視機上重播 ........................................65 與 DVD 錄影機一起使用 ......................... 66 將拍攝內容複製到 DVD 錄影機上.............66 與 VCR 一起使用.................................... 66 將影像複製到其他視頻設備上...................66 與印表機 (PictBridge) 一起使用 ............ 67 與計算機一起使用 與計算機一起使用之前 ........................... 69 可以用計算機做什麼 .................................69 操作環境 ................................................
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.book 9 ページ ２００７年２月９日 金曜日 午後２時５１分 使用之前 24 11 12 13 6 25 14 15 16 7 26 8 9 10 17 18 6 7 8 9 10 11 12 13 14 15 16 17 18 19 19 端子蓋 功能表按鈕 [MENU] (l 26) DC 輸入端子 [DC/C.C.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.book 18 ページ ２００７年２月９日 金曜日 午後２時５１分 設定 充電時間和可拍攝時間 下表中所示的時間是指溫度為 25 oC，濕度為 60% 時的時間。 如果溫度高於或低於 25 oC，則充電時間 將會變長。 ∫ 充電時間 ≥ 表中所示的充電時間為估計值。 ≥“2 h 25 min”表示 2 小時 25 分鐘。 SDR-H250: 電池型號 電壓／容量 充電時間 提供的電池／ CGA-DU12 （可選件） 7.2 V/1150 mAh 2 h 25 min CGA-DU14 （可選件） 7.2 V/1360 mAh 2 h 45 min CGA-DU21 （可選件） 7.2 V/2040 mAh 3 h 55 min 電池型號 電壓／容量 充電時間 提供的電池／ CGR-DU06 （可選件） 7.2 V/640 mAh 1 h 40 min SDR-H21/SDR-H20: CGA-DU07 （可選件） 7.2 V/680 mAh 1 h 30 min CGA-DU12 （可選件） 7.
LSQT1212_T.CH.book 19 ページ ２００７年２月９日 金曜日 午後２時５１分 設定 SDR-H21/SDR-H20: 電池型號 電壓／容量 提供的電池／ CGR-DU06 （可選件） 7.2 V/640 mAh CGA-DU07 （可選件） 7.2 V/680 mAh CGA-DU12 （可選件） 7.2 V/1150 mAh CGA-DU14 （可選件） 7.2 V/1360 mAh CGA-DU21 （可選件） 7.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.book 28 ページ ２００７年２月９日 金曜日 午後２時５１分 設定 如果螢幕顯示的日期和時間不正確，請進行調 整。 ¬ 轉動模式轉盤選擇 1 或 。 按MENU按鈕後，選擇[基本功能] # [ 時鐘設定 ] # [ 是 ]，然後按下操縱 桿。 ∫ 改變日期和時間顯示類型 按 MENU 按鈕後，選擇 [ 設定 ] # [ 日 期 / 時間 ] # 需要的顯示類型，然後按 下操縱桿。 ≥ 也可以通過反覆按遙控器上的 DATE/TIME 按鈕 來顯示或改變日期和時間顯示。 (SDR-H250) [ 日期 ] [ 日期 / 時間 ] 15.12.2007 MENU 2 左右移動操縱桿，選擇要設定的選 項。 然後，上下移動操縱桿，設定 想要的值。 [關] ∫ 改變顯示類型 按 MENU 按鈕後，選擇 [ 設定 ] # [ 日 期格式 ] # 需要的顯示類型，然後按下 操縱桿。 顯示類型 ≥ 年份將按下列順序改變： 2000, 2001, ..., 2099, 2000, ...
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.book 35 ページ ２００７年２月９日 金曜日 午後２時５１分 拍攝 拍攝靜態圖片 [HDD] [SD] 可以使用本機錄製靜態圖片到內置硬碟和 SD 卡中。 (l 13) 錄製前，請使用功能表選擇錄製目的地。 (l 下 ) 第一次開啟本機時，將出現錄製靜態圖片的媒體選擇螢幕。選擇 [ 硬碟 ] 或 [SD 記憶卡 ]，然後按下操縱 桿。 ≥ 在購買本機時，[ 圖片尺寸 ] 被設定為 [ 2 ] (SDR-H250)/[ 0.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.book 38 ページ ２００７年２月９日 金曜日 午後２時５１分 拍攝 靜態圖片拍攝的像素數和圖片質量 ∫ [ 圖片尺寸 ] 改變拍攝的尺寸。 按 MENU 按鈕後，選擇 [ 基本功能 ] # [ 圖片尺寸 ] # 想要的選項，然後按下操 縱桿。 MENU SDR-H250: 圖示 3.1M 寬高比 4:3 像素數 2048k1512 1M 4:3 1280k960 0.3M 4:3 640k480 16:9 1920k1080 2 SDR-H21/SDR-H20: 圖示 0.3M 0.2 寬高比 4:3 像素數 640k480 16:9 640k360 ≥ 在購買本機時，[ 圖片尺寸 ] 被設定為 [ 2 ] (SDR-H250)/[ 0.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.book 48 ページ ２００７年２月９日 金曜日 午後２時５１分 拍攝 1 將 AUTO/MANUAL/FOCUS 開關設 定為 MANUAL。 MNL 3/3 NEXT 自動顯示圖例中顯示的圖示。 2 左右移動操縱桿選擇 [ ] （光圈） 或 [ ] （快門速度）。 ∫ 手動光圈／增益調整 ≥ 如果增益值增大，則螢幕上的噪點會增加。 ≥ 根據變焦放大率的不同，有些光圈值不顯示。 MNL 3/3 NEXT 3 左右移動操縱桿進行調整。 A B MNL 1/100 100 OPEN BACK A 快門速度： 1/50 至 1/8000 1/25 至 1/2000 (SDR-H250) 1/50 至 1/500 (SDR-H21/SDR-H20) ≥ 快門速度越接近 1/8000 速度越快。 B 光圈／增益值： CLOSE # (F16 至 F2.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.book 68 ページ ２００７年２月９日 與其他產品一起使用 8 在 [ 頁面編排 ] 上選擇編排設定。 [ 標準 ]: 印表機的編排規格 [ ]: 無邊框列印 [ ]: 有邊框列印 ≥ 不能設定印表機不支持的頁面編排。 9 選擇 [ 列印 ] # [ 是 ]，然後按下操縱 桿。 列印圖片。 ≥ 列印圖片後，以斷開 USB 電纜的方式退出 PictBridge。 想中途停止列印時 向下移動操縱桿。 出現一條確認訊息。 如果選擇 [ 是 ]，會取消設定 的列印數量，螢幕會返回到步驟 3。 如果選擇 [ 否 ]，所有設定會保持不變，螢幕會返回到步 驟 3。 ≥ 請在列印過程中避免下列操作。這些操作會使 正常列印無法完成。 j斷開 USB 電纜 j開啟記憶卡插槽蓋 j轉換模式轉盤 j關閉電源 ≥ 檢查印表機的紙張大小、列印質量等的設定。 ≥ 設定 [ 2 ] (SDR-H250)/[ 0.
LSQT1212_T.CH.
LSQT1212_T.CH.book 70 ページ ２００７年２月９日 金曜日 午後２時５１分 與計算機一起使用 操作環境 ≥ 安裝提供的軟體時，需要 CD-ROM 驅動器。 ≥ 當計算機上連接了 2 個或 2 個以上的 USB 設備，或者通過 USB 集線器或用擴展電纜連接設備時，無法保 證正常工作。 ≥ 連接到計算機時，請使用提供的 USB 電纜。 （用任何其他的 USB 電纜將無法保證正常工作。） ∫ ImageMixer3 for Panasonic 硬體 IBM PC/AT 兼容的個人計算機 OS Microsoft Windows 2000 Professional Service Pack 3 或 Service Pack 4 Microsoft Windows XP Home Edition Microsoft Windows XP Professional CPU Intel Pentium III 800 MHz 或更高、Pentium 4、Celeron 或相同性能的 AMD Athlon XP/Duron （Intel Pentium 4 1.
LSQT1212_T.CH.book 71 ページ ２００７年２月９日 金曜日 午後２時５１分 與計算機一起使用 ∫ 使用內置的 SD 驅動器 硬體 IBM PC/AT 兼容的個人計算機 OS Microsoft Windows 2000 Professional Microsoft Windows XP Home Edition Microsoft Windows XP Professional CPU Intel Pentium II 300 MHz 或更高 RAM 32 MB 或更高 （推薦使用 64 MB 或更高） 介面 USB 1.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.book 74 ページ ２００７年２月９日 金曜日 午後２時５１分 與計算機一起使用 SD 卡 關於計算機的顯示 將本機連接到計算機時，它被作為外置設備識 別。 ≥ 本機僅支持使用計算機讀出資料。 計算機無法 將資料寫入本機，或從本機中擦除資料。 ≥ 根據計算機操作環境的不同，驅動器圖示的形 狀和驅動器名稱 （例如： E:） 也將有所不同。 ∫ 驅動器圖示 此圖示顯示在 [My Computer] 中。 存取硬碟時 ≥ Windows XP: ≥ Windows 2000: 存取記憶卡時 ≥ Windows XP: ≥ Windows 2000: ≥ SD- 視頻格式的動態影像存儲在 [PRG¢¢¢] 資 料夾中。 （“¢¢¢”表示以從 001 至 FFF 的 16 （十六進制）個字符為基礎。） ≥ 在 [PRG¢¢¢] 資料夾中最多可以錄製 99 個檔 案。 ≥ JPEG 格式的靜態圖片 （IMGA0001.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.book 83 ページ ２００７年２月９日 金曜日 午後２時５１分 其他 遠攝微距 (SDR-H250) 指示 淡入淡出 （白色）、淡入淡出 （黑色） , 指示 全彩夜視功能 視頻照明 (SDR-H250/ SDR-H21) ∫ 媒體指示 選擇硬碟時 變焦麥克風 ZOOM 選擇 SD 卡時 風聲噪音降低 / / +1 ∫ 拍攝指示 -1 動態影像拍攝 SP ; 0h00m00s +1 R 12h45m +2 / -2 XP , SP , LP 動態影像拍攝模式 5 運動模式 肖像模式 低光模式 聚光燈模式 水上及雪地模式 AWB 自動白平衡 室內模式 （在白熾燈下拍攝） 室外模式 手動調整模式 MNL AWB 1/100 OPEN 0dB 15.12.2007 15:30 靜態圖片拍攝 +1 2 R 10000 MEGA MNL AWB 1/100 OPEN 0dB 15.12.
LSQT1212_T.CH.book 84 ページ ２００７年２月９日 金曜日 午後２時５１分 其他 ∫ 重播指示 靜態圖片的拍攝像素數 動態影像重播 SDR-H250: 3.1M 2 1M 0.3M 2048k1512 1920k1080 1280k960 640k480 SDR-H21/ SDR-H20: 靜態圖片重播 0.3M 0.2 640k480 640k360 不顯示某些靜態圖片的尺寸，這些靜態圖片是 用其他產品拍攝的並與上面所示的圖片尺寸有 所不同。 1 重播 ; 暫停 5, 6, / ∫ 確定的指示 -- （時間顯 示） 快進／快退 7/8 最後一個／第一個場景暫停 9/: 跳躍重播 D/E 慢動作重播 ° 01 No.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.
LSQT1212_T.CH.book 98 ページ ２００７年２月９日 金曜日 午後２時５１分 其他 規格 SD 卡／硬碟攝錄放影機 安全注意事項 電源： 電流功率： DC 7.9 V/7.2 V 拍攝時 5.7 W (SDR-H250)/4.7 W (SDR-H21)/4.4 W (SDR-H20) 信號系統 CCIR: 625 線，50 場 PAL 彩色信號 錄製格式 SD 卡： 基於 SD-Video 標準 硬碟： 單獨的標準 影像感測器 SDR-H250: 1/6z 3CCD 影像感測器 總計： 800 Kk3 有效像素： 動態影像： 630 Kk3 (4:3), 540 Kk3 (16:9) 靜態圖片： 710 Kk3 (4:3), 540 Kk3 (16:9) SDR-H21/SDR-H20: 1/6z CCD 影像感測器 總計： 800 K 有效像素： 動態影像： 400 K (4:3), 540 K (16:9) 靜態圖片： 410 K (4:3), 550 K (16:9) 鏡頭 SDR-H250: 自動光圈，F1.8 至 F2.8 焦距： 3.
LSQT1212_T.CH.book 99 ページ ２００７年２月９日 金曜日 午後２時５１分 其他 視頻輸出標準 1.0 Vp-p, 75 ™ S 視頻 輸出標準 Y: 1.0 Vp-p, 75 ™ C: 0.3 Vp-p, 75 ™ 音頻輸出標準 （線路） 316 mV, 600 ™ USB 記憶卡讀取功能 （無版權保護支持） 硬碟讀取功能 兼容 Hi-Speed USB (USB 2.0) 兼容 PictBridge 尺寸 （不包括突出部分） 70.1 mm （寬） k 73.0 mm （高） k 120.
LSQT1212_T.CH.book 100 ページ ２００７年２月９日 金曜日 午後２時５１分 其他 靜態圖片 錄製媒體 SD 記憶卡： 8 MB/16 MB/32 MB/64 MB/128 MB/256 MB/512 MB/1 GB/2 GB （可 移動型）（兼容 FAT12 及 FAT16 格式） SDHC 記憶卡： 4 GB （可移動型）（兼容 FAT32 格式） 硬碟： 30 GB* （固定型） 壓縮 JPEG (Design rule for Camera File system，基於 Exif 2.
LSQT1212_T.CH.book 101 ページ ２００７年２月９日 金曜日 午後２時５１分 其他 硬碟或 SD 卡上的可拍攝的圖片數量 SDR-H250: 圖片尺寸 3.1M (2048k1512) 2 (1920k1080) 圖片質量 [HDD] [SD] 30 GB 19160 29950 24960 8 MB 2 4 3 6 16 MB 7 12 10 16 32 MB 18 28 23 37 64 MB 38 61 50 80 128 MB 75 120 98 155 256 MB 155 250 210 320 512 MB 310 490 410 640 1 GB 630 990 820 1290 2 GB 1280 2010 1670 2630 4 GB 2520 3950 3290 5170 圖片尺寸 1 M (1280k960) 39230 0.
LSQT1212_T.CH.book 102 ページ ２００７年２月９日 金曜日 午後２時５１分 其他 SDR-H21/SDR-H20: 圖片尺寸 0.3M (640k480) (640k360) 0.
LSQT1212_T.CH.
LSQT1212_GC(EN).book 104 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Information for Your Safety WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, ≥ DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. ≥ USE ONLY THE RECOMMENDED ACCESSORIES. ≥ DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
LSQT1212_GC(EN).book 105 ページ ２００７年２月１５日 木曜日 午前１０時１３分 ENGLISH ∫ How to replace the Fuse The location of the fuse differ according to the type of AC mains plug (figures A and B). Confirm the AC mains plug fitted and follow the instructions below. Illustrations may differ from actual AC mains plug. 1) Open the fuse cover with a screwdriver. Figure A Figure B -If you see this symbolInformation on Disposal in other Countries outside the European Union This symbol is only valid in the European Union.
LSQT1212_GC(EN).book 106 ページ ２００７年２月１５日 ∫ Indemnity concerning recording content The manufacturer shall in no event be liable for the loss of recordings due to malfunction or defect of this unit, its accessories or recordable media. 木曜日 午前１０時１３分 ≥ Other names of systems and products mentioned in these instructions are usually the registered trademarks or trademarks of the manufacturers who developed the system or product concerned.
LSQT1212_GC(EN).book 107 ページ ２００７年２月１５日 Contents Information for Your Safety............... 104 Before using Features .............................................. 109 Accessories ........................................ 111 Parts identification and handling ..... 111 Using the LCD monitor ........................... 114 Using the remote control (SDR-H250) ... 115 HDD and SD card ............................... 117 Concerning the internal HDD and cards that can be used on this unit ..................
LSQT1212_GC(EN).book 108 ページ ２００７年２月１５日 onto a DVD recorder ..............................174 With a VCR.......................................... 174 Dubbing images onto other video devices ........................174 With a printer (PictBridge)................. 175 With a computer Before using with a computer........... 178 What you can do with a computer ..........178 Operating environment...........................179 Installation ..........................................
LSQT1212_GC(EN).book 109 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Before using Before using Features ∫ Extended recording! You can record the equivalent of approximately twenty-two 8 cm DVD discs on the 30 GB internal HDD. You can also record motion pictures and still pictures on an SD card. HDD ∫ Easy recording! (l 137) No need to search for the recording start position. The new recording will not overwrite any previously recorded scene. ∫ Easy playback! (l 156) Recorded scenes are displayed as thumbnails.
LSQT1212_GC(EN).book 110 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Before using ∫ Editing scenes! (l 162, 163) You can create an original video (playlist) by collecting together your favourite scenes recorded on the HDD. ∫ Using with a computer! (l 178) If you use the supplied software, you can create a backup DVD of the scenes recorded on this unit with just one button. You can also make an original DVD-Video by exporting the scenes to a computer and then editing them.
LSQT1212_GC(EN).book 111 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Before using Accessories Optional accessories Check the accessories before using this unit. SD Memory Card (512 MB) Some optional accessories may not be available in some countries.
LSQT1212_GC(EN).book 112 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Before using 4 White balance sensor (l 153) Remote control sensor (SDR-H250) (l 116) Microphone (built-in, stereo) 5 21 When recording: Zoom lever [W/T] (l 144) When playing back: Volume lever [sVOLr] (l 158) 22 Photoshot button [ ] (l 140) 23 Illumination LED (l 191) 11 12 13 6 24 14 15 16 7 25 8 9 26 10 17 18 6 7 8 9 10 11 12 13 14 15 16 17 18 19 19 Terminal cover Menu button [MENU] (l 130) DC input terminal [DC/C.C.
LSQT1212_GC(EN).book 113 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Before using 33 Reset button [RESET] (l 202) 34 Mode select switch [AUTO/MANUAL/ FOCUS] (l 136, 151, 152) 35 Card slot cover [SD CARD] (l 125) 36 Card access lamp [ACCESS] (l 120, 183) Rotate the lens cover open/close ring. Attaching the lens cap (SDR-H21/SDR-H20) Attach the lens cap to protect the surface of the lens. 37 37 Grip belt (l 113) 1 Pass the end of the lens cap cord through the belt. 2 Pass the lens cap through the loop.
LSQT1212_GC(EN).book 114 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Before using 3 To attach or remove the lens cap, hold both sides of the lens cap with the tips of your finger and thumb. Using the LCD monitor You can record the image while viewing it on the LCD monitor. 1 Place your finger on the LCD monitor open part A and pull the LCD monitor out in the direction of the arrow. During recording The removed lens cap can be attached to the lens cap fixture. A ≥ It can open up to 90o.
LSQT1212_GC(EN).book 115 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Before using 1 Using the remote control (SDR-H250) 1 2 3 PHOTO EXT DISPLAY SHOT DATE/ TIME START/ STOP 8 SEARCH PLAY SEARCH STILL ADV PAUSE STILL ADV SKIP STOP SKIP MENU 5 6 A 7 ZOOM VOL 4 While pressing the stopper A, pull out the battery holder. 2 Set the button-type battery with its (r) mark facing upward and then put the battery holder back in place.
LSQT1212_GC(EN).book 116 ページ ２００７年２月１５日 Before using ∫ Remote control usable range The distance between the remote control and the unit’s remote control sensor A: Within approx. 5m Angle: Approx. 10o up and 15o down, left, and right A ≥ The remote control is intended for indoor operation. Outdoors or under strong light, the unit may not operate properly even within the usable ranges.
LSQT1212_GC(EN).book 117 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Before using HDD and SD card This unit can be used for recording motion pictures and still pictures to the internal HDD and an SD card.
LSQT1212_GC(EN).book 118 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Before using ≥ Use this unit to format SD cards. If an SD card is formatted on other products (such as a computer), the time spent for recording may become longer and you may not be able to use the SD card. (l 171) ≥ When using an SD card on which data has been written many times, the remaining time left for recording may be reduced. ≥ Keep the Memory Card out of reach of children to prevent swallowing. ≥ A MultiMediaCard cannot be used on this unit.
LSQT1212_GC(EN).book 119 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Before using HDD handling precautions This unit has an internal HDD. The HDD is a precision instrument so take care when handling it. ∫ Do not cause any vibrations or impacts to this unit. The HDD may no longer be recognised or recording or playback may no longer be possible. In particular, do not cause any vibrations or impacts during recording or playback. ∫ Do not drop this unit.
LSQT1212_GC(EN).book 120 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Before using ∫ Card access lamp ≥ When this unit accesses the SD card (reading, recording, playback, erasing, etc.), the access lamp lights up. ≥ If the following operations are performed when the access lamp is lit, then the SD card or the recorded data may be damaged or this unit may malfunction.
LSQT1212_GC(EN).book 121 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Setup Setup Power supply Inserting the battery Push the battery against the battery holder and slide it until it clicks. Charging the battery When this unit is purchased, the battery is not charged. Charge the battery before using this unit. ≥ If the DC cable is connected to the AC adaptor, then the battery will not be charged. Remove the DC cable from the AC adaptor.
LSQT1212_GC(EN).book 122 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Setup Charging time and recordable time The times shown in the tables below are for when the temperature is 25 oC and the humidity is 60%. If the temperature is higher or lower than 25 oC, the charging time will become longer. ∫ Charging time ≥ The charging time shown in the table are approximations. ≥ “2 h 25 min” indicates 2 hours 25 minutes. SDR-H250: Battery model number Voltage/capacity Charging time Supplied battery/ CGA-DU12 (optional) 7.
LSQT1212_GC(EN).book 123 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Setup SDR-H21/SDR-H20: Battery model number Voltage/ capacity Supplied battery/ CGR-DU06 (optional) 7.2 V/640 mAh CGA-DU07 (optional) 7.2 V/680 mAh CGA-DU12 (optional) 7.2 V/1150 mAh CGA-DU14 (optional) 7.2 V/1360 mAh CGA-DU21 (optional) 7.
LSQT1212_GC(EN).book 124 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Setup Connecting to the AC outlet The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always “live” as long as the AC adaptor is connected to an electrical outlet. 1 Connect the AC cable to the AC adaptor and the AC outlet. 2 Connect the DC cable to the AC adaptor. 3 Connect the DC cable to this unit. ≥ Do not use the AC cable with any other equipment as it is designed only for this unit.
LSQT1212_GC(EN).book 125 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Setup ∫ To turn on the power Open the LCD monitor. ≥ Check that the status indicator has gone off. 2 Open the LCD monitor and then slide the card slot open lever A to open the card slot cover. The status indicator lights and the power turns on. A ∫ To turn off the power Close the LCD monitor. 3 Insert/remove the SD card into/ from the card slot. The status indicator goes off and the power turns off.
LSQT1212_GC(EN).book 126 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Setup 4 Securely close the card slot cover. How to use the joystick This unit has a joystick for selecting functions, performing operations, etc. so it is easy to operate this unit with one hand. Basic operations Operations on the menu screen and selection of files on the thumbnail view screen, etc. Move the joystick up, down, left, or right to select an item or scene, and then press the joystick to set it.
LSQT1212_GC(EN).book 127 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Setup 2 Move the joystick up, left or right to select an item. Operations during playback ¬ Rotate the mode dial to select . 1 or Move the joystick up, down, left or right to select the scene to be played back and press the joystick. The selected scene is played back on the full screen. ≥ The operation icon is automatically displayed on the screen. 2 Move the joystick up, down, left or right to operate.
LSQT1212_GC(EN).
LSQT1212_GC(EN).
LSQT1212_GC(EN).book 130 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Setup ∫ Help mode The help mode explains the operation icons that are displayed when the AUTO/MANUAL/FOCUS switch is set to AUTO in video/picture recording mode. ¬ Rotate the mode dial to select . 1 ≥ When the help mode is used, functions cannot be set. ≥ When the help mode is used, motion pictures and still pictures cannot be recorded. or Press the joystick to display the icon during the recording pause.
LSQT1212_GC(EN).book 131 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Setup ≥ Do not switch the mode dial when the menu is displayed. 2 3 6 Move the joystick up or down in order to select the desired item. 7 Press the joystick to enter the selection. Move the joystick up or down in order to select the desired top menu. Move the joystick right or press the joystick. To get back to the previous screen Move the joystick left. 4 Move the joystick up or down in order to select the submenu item.
LSQT1212_GC(EN).book 132 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Setup 2 2 Select a menu item. MENU ENTER Move the joystick left or right to select the item to be set. Then, move the joystick up or down to set the desired value. ≥ Use the direction buttons (3,4,2,1) and ENTER button in place of the joystick on the main unit. 3 Press the MENU button to exit the menu screen. 3 MENU ENTER When the unit is turned on for the first time, a message asking you to set the date and time will appear.
LSQT1212_GC(EN).book 133 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Setup 2 Display style Screen display [Y/M/D] 2007.12.15 [M/D/Y] 12.15.2007 [D/M/Y] 15.12.2007 ≥ The date and time function are driven by a built-in lithium battery. ≥ Make sure to check the time before recording. ≥ If the time display becomes [- -], the built-in lithium battery has run down. Use the following steps to charge the battery.
LSQT1212_GC(EN).book 134 ページ ２００７年２月１５日 Setup Each time you press the button: 1 Original brightness 2 Bright 3 Brighter 4 Darker 5 Dark 1 2 3 5 -1 4 -2 +1 +2 ≥ This will not affect the images to be recorded. ≥ If you turn on the unit when the AC adaptor is used, this function will automatically be “Bright”. ≥ (SDR-H250/SDR-H21) The LCD monitor will become a little darker when the video light is lit.
LSQT1212_GC(EN).book 135 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Recording Recording Before recording Basic camera positioning 1 4 3 2 5 1 Hold the camera with both hands. 2 Put your hand through the grip belt. 3 Do not cover the microphones or sensors with your hands. 4 Keep your arms near your body. 5 Slightly open your legs. ≥ When you are outdoors, record pictures with the sunlight behind you. If the subject is backlit, it will become dark in the recording.
LSQT1212_GC(EN).book 136 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Recording ∫ About auto mode Set the AUTO/MANUAL/FOCUS switch to AUTO, and colour balance (white balance) and focusing will be adjusted automatically. jAuto white balance (l 206) jAuto focusing (l 207) Depending on the brightness of the subject etc., the aperture and shutter speed are automatically adjusted for optimum brightness. (When set to the video recording mode: The shutter speed is adjusted to a maximum of 1/250.
LSQT1212_GC(EN).book 137 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Recording Recording motion pictures [HDD] [SD] This unit can be used for recording motion pictures to the internal HDD and an SD card. (l 117) Before recording, use the menu to select the recording destination. (l below) When the unit is turned on for the first time, the media select screen for recording motion pictures will appear. Select [HDD] or [SD CARD] and press the joystick.
LSQT1212_GC(EN).book 138 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Recording To end the recording Press the recording start/stop button again to pause recording. ≥ [¥] and [;] are red during recording. Do not move this unit until [;] is green. The images recorded between pressing the recording start/stop button to start recording and pressing it again to pause recording become one scene. However if the recording destination is the HDD, the scene is automatically divided when the recorded data exceeds 4 GB.
LSQT1212_GC(EN).book 139 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Recording Recording modes and recordable time available for the motion picture Changing the recording mode of the motion picture. Press the MENU button, then select [BASIC] # [REC MODE] # desired item and press the joystick. MENU ≥ The recordable time shown in the table are approximations.
LSQT1212_GC(EN).book 140 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Recording Recording still pictures [HDD] [SD] This unit can be used for recording still pictures to the internal HDD and an SD card. (l 117) Before recording, use the menu to select the recording destination. (l below) When the unit is turned on for the first time, the media select screen for recording still pictures will appear. Select [HDD] or [SD CARD] and press the joystick.
LSQT1212_GC(EN).book 141 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Recording A Focus indication A ± (The white lamp flashes.): Focusing ¥ (The green lamp lights up.): When in focus B No mark: When focusing is unsuccessful. ≥ The focus indication is indicated as follows when the Photoshot button [ ] is not pressed halfway. Please use it as a guide for recording. ¥ (The green lamp lights up.): When in focus and a good picture can be recorded. ± (The white lamp lights up.
LSQT1212_GC(EN).book 142 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Recording Screen indications in picture recording mode A Size of still pictures B Selected recording destination C Remaining number of still pictures (Flashes in red when [R 0] appears.) D Quality of still pictures A B R 12345 C D ∫ About the focus indication (SDR-H250) ≥ The focus indication does not appear in manual focus mode. ≥ Focus on a subject manually when it is not easily focused.
LSQT1212_GC(EN).book 143 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Recording Number of pixels and picture quality for still picture recording ∫ [PICTURE SIZE] Changing the recording size. Press the MENU button, then select [BASIC] # [PICTURE SIZE] # desired item and press the joystick. MENU SDR-H250: Icon Aspect Number of pixels 3.1M 4:3 2048k1512 1M 4:3 1280k960 0.3M 4:3 640k480 16:9 1920k1080 2 SDR-H21/SDR-H20: Icon Aspect 0.3M 4:3 640k480 16:9 640k360 0.
LSQT1212_GC(EN).book 144 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Recording Various recording functions Zoom in/out function [HDD] [SD] SDR-H250: You can zoom in up to 10k optically. SDR-H21/SDR-H20: You can zoom in up to 32k optically. ¬ Rotate the mode dial to select . or Move the zoom lever. (SDR-H250)/2 cm (SDR-H21/SDR-H20) away from the lens. (Macro function) ≥ The zoom speed varies depending on the range over which the zoom lever is moved.
LSQT1212_GC(EN).book 145 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Recording ≥ This function cannot be used in picture recording mode. To use the zoom microphone function [HDD] [SD] The zoom microphone is linked to the zooming operation so that far-away sounds with a teleshot and close-up sounds with a wide-angle shot are recorded more clearly. ¬ Rotate the mode dial to select . Press the MENU button, then select [ADVANCED] # [ZOOM MIC] # [ON] and press the joystick.
LSQT1212_GC(EN).book 146 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Recording 1 SDR-H250: ≥ Video recording mode A B C Press the joystick. Then move the joystick down to display the icon shown in the illustration. r 1/2 NEXT ≥ Picture recording mode B C 2 Move the joystick up to select [ª]. SDR-H21: ≥ Video recording mode/Picture recording mode A B C 1/2 NEXT r The image on the screen will become brighter. To return to normal recording ≥ The subject should be within 1.3 m of the unit.
LSQT1212_GC(EN).book 147 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Recording 2 Move the joystick left to select [ ]. 1/2 NEXT 3 Press the recording start/stop button. Start recording. (Fade in) Press the MENU button, then select [ADVANCED] # [FADE COLOUR] # [WHITE] or [BLACK] and press the joystick. ≥ If you turn off the power, the fade function is cancelled. ≥ While the fade in/fade out function is selected, it takes several seconds to display the image when you start recording.
LSQT1212_GC(EN).book 148 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Recording ≥ If the background or anything else in the scene has colours similar to the skin colour, they will also be smoothed. ≥ If the brightness is insufficient, the effect may not be clear. ≥ You may not be able to see the face clearly when recording a distant person. In this case, cancel soft skin mode or zoom in on the face. Tele macro function (SDR-H250) Colour night view function This allows recording in dark locations.
LSQT1212_GC(EN).book 149 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Recording To cancel the colour night view function Select [ ] again. ≥ The colour night view function makes the signal charging time of CCD up to approximately 25k longer than usual, so that dark scenes can be recorded brightly. For this reason, bright dots that are usually invisible may be seen, but this is not a malfunction. ≥ If you turn off the power or operate the mode dial, the colour night view function is cancelled.
LSQT1212_GC(EN).book 150 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Recording Wide mode This is for selecting the screen’s aspect ratio when recording motion pictures. Press the MENU button, then select [ADVANCED] # [O.I.S.] # [ON] and press the joystick. [HDD] [SD] MENU This allows you to record images compatible with wide-screen TVs (16:9) and regular TVs (4:3). ∫ Recording images with a 16:9 aspect ratio ¬ Rotate the mode dial to select To cancel the image stabilizer function .
LSQT1212_GC(EN).book 151 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Recording Press the MENU button, then select [ADVANCED] # [WIND CUT] # [ON] and press the joystick. 1 Set the AUTO/MANUAL/FOCUS switch to MANUAL. 2 Press the MENU button, then select [BASIC] # [SCENE MODE] # desired item and press the joystick. MENU To cancel the wind noise reduction function Press the MENU button, then select [ADVANCED] # [WIND CUT] # [OFF] and press the joystick. ≥ This function’s default setting is [ON].
LSQT1212_GC(EN).book 152 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Recording ≥ During normal playback, the image movement may not look smooth. ≥ Avoid recording under fluorescent light, mercury light or sodium light because the colour and brightness of the playback image may change. ≥ If you record a subject illuminated with strong light or a highly reflective subject, vertical lines of light may appear. ≥ If the brightness is insufficient, the sports mode does not function. The [5] display flashes.
LSQT1212_GC(EN).book 153 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Recording 1 Set the AUTO/MANUAL/FOCUS switch to MANUAL. To set the white balance manually 1 MNL Select [ ], and fill the screen with a white subject. MNL 3/3 NEXT The icon shown in the illustration is displayed automatically. 2 Move the joystick up to select [ ]. BACK BACK 2 Move the joystick up to select [ ]. MNL MNL 3/3 NEXT BACK 3 Move the joystick left or right to select the white balance mode.
LSQT1212_GC(EN).book 154 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Recording 1 ∫ About the black balance adjustment (SDR-H250) Set the AUTO/MANUAL/FOCUS switch to MANUAL. This is one of the 3CCD system functions that automatically adjusts the black when the white balance is set in the manual adjustment mode. When the black balance is adjusted, the screen will temporarily be black. (The black balance cannot be adjusted manually.) 1 2 MNL 3/3 NEXT The icon shown in the illustration is displayed automatically.
LSQT1212_GC(EN).book 155 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Recording ≥ When setting both the shutter speed and the iris/gain value, set the shutter speed and then set the iris/gain value. ∫ Manual shutter speed adjustment ≥ Avoid recording under fluorescent light, mercury light or sodium light because the colour and brightness of the playback image may change.
LSQT1212_GC(EN).book 156 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Playback Playback Motion picture playback [HDD] [SD] Play back the motion pictures recorded on the internal HDD or SD card. Use the menu to select the desired playback medium. (l below) 1 Rotate the mode dial to select . 2 Press the MENU button, then select [MEDIA SELECT] # [HDD] or [SD CARD] to select the desired medium and press the joystick. The motion pictures recorded on the selected medium are displayed as thumbnails.
LSQT1212_GC(EN).book 157 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Playback ≥ When the amount of time recorded on the scene is short, playback may not be possible. ≥ When a scene is displayed as [ ] on the thumbnail display, playback is not possible. ≥ The power will not turn off when the LCD monitor is closed.
LSQT1212_GC(EN).book 158 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Playback ∫ Operating with the remote control (SDR-H250) Press the E or D button. SEARCH PLAY SEARCH STILL ADV PAUSE STILL ADV SKIP STOP SKIP Frame-by-frame playback The motion picture is advanced one frame at a time. 1 Move the joystick up during playback to pause the playback. 2 Move the joystick right. (The frames will be advanced one at a time in the reverse direction when you move the joystick left.
LSQT1212_GC(EN).book 159 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Playback Scenes recorded on the same day can be played back in succession. 1 Press the MENU button, then select [PLAY SETUP] # [PLAY MODE] # [BY DATE] and press the joystick. The [VIEW BY DATE] screen is displayed by month when playing back motion pictures on the HDD. Proceed to step 3 when playing back an SD card. ≥ When [PLAY MODE] is set to [VIEW ALL], all recorded motion pictures will be played back in succession.
LSQT1212_GC(EN).book 160 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Playback Still picture playback [HDD] [SD] Play back the still pictures recorded on the internal HDD or SD card. Use the menu to select the desired playback medium. (l below) 1 Rotate the mode dial to select . 2 Press the MENU button, then select [MEDIA SELECT] # [HDD] or [SD CARD] to select the desired medium and press the joystick. The still pictures recorded on the selected medium are displayed as thumbnails.
LSQT1212_GC(EN).book 161 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Playback ≥ The file format supported by this unit is JPEG. (Not all JPEG formatted files will be played back.) ≥ If a non-standard file is played back, the folder/file number may not be displayed. ≥ This unit may degrade or not play back data recorded or created on another product and another product may degrade or not play back data recorded on this unit. ≥ Do not operate the mode dial during the slide show.
LSQT1212_GC(EN).book 162 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Editing Editing Editing scenes 1 Press the button in the thumbnail display. 2 Select [ALL] or [SELECT] and press the joystick. Deleting scenes This is for deleting motion picture scenes. [HDD] [SD] The deleted scenes cannot be restored. Deleting scenes one at a time ¬ Rotate the mode dial to select . ¬ Select [HDD] or [SD CARD] in [MEDIA SELECT]. 1 Press the playback.
LSQT1212_GC(EN).book 163 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Editing SET] # [YES] and press the joystick. To cancel deleting halfway Press the MENU button. ≥ Scenes are deleted from the last scene on the thumbnail display. The scenes that have already been deleted when the deletion is cancelled cannot be restored. MENU To complete editing Press the MENU button. ≥ You can also delete scenes by pressing the MENU button, selecting [DELETE] and then selecting [ALL] or [SELECT].
LSQT1212_GC(EN).book 164 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Editing [PLAYLIST] # [CREATE] and press the joystick. ≥ If you create or delete playlists, the original scenes will not be modified. Editing scenes on a playlist will not affect the original scenes. A MENU B 2 A Recorded scenes B Playlist ≥ You can create a playlist on the HDD only. You cannot create a playlist on an SD card.
LSQT1212_GC(EN).book 165 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Editing Playing back a playlist Editing a playlist [HDD] [HDD] ¬ Rotate the mode dial to select . ¬ Select [HDD] in [MEDIA SELECT]. 1 Press the MENU button, then select [PLAY SETUP] # [PLAYLIST] # [VIEW LIST] and press the joystick. Editing scenes on a playlist will not affect the original scenes. Adding scenes to playlist ¬ Select playlist playback mode.
LSQT1212_GC(EN).book 166 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Editing The thumbnail view screen of the playlist that scenes were added to is displayed. Repeat steps 2-3. To continue adding scenes to the playlist To complete editing Repeat steps 1-4. Press the MENU button. Moving scenes Deleting scenes The scenes in a playlist can be moved. ≥ Deleting scenes on a playlist will not affect the original scenes. ¬ Select playlist playback mode.
LSQT1212_GC(EN).book 167 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Editing 2 Select [ALL] or [SELECT] and press the joystick. ≥ When [ALL] is selected, the selected playlist will be erased. Proceed to step 5. 3 ≥ When a playlist is deleted, the number of each subsequent playlist decreases by one. Editing still pictures (Only when [SELECT] is selected in step 2) Select the scene to be deleted, then press the joystick. Deleting still picture files This is for deleting still picture files.
LSQT1212_GC(EN).book 168 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Editing 1 Press the button in the thumbnail display. been deleted when the deletion is cancelled cannot be restored. To complete editing Press the MENU button. ∫ Deleting still picture files recorded on an SD card by other products A still picture file (other than JPEG) that cannot be played back on this unit may be erased. 2 Select [ALL] or [SELECT] and press the joystick.
LSQT1212_GC(EN).book 169 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Editing 1 [DPOF SET] # [SET] and press the joystick. Press the MENU button, then select [PHOTO SETUP] # [LOCK SET] # [YES] and press the joystick. MENU MENU 2 2 Select the file to be set, then press the joystick. Select the file to be protected, then press the joystick. The number of prints set to be in DPOF is displayed. [ ] display appears and the selected file is locked. ≥ Press the joystick again to release the lock setting.
LSQT1212_GC(EN).book 170 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Editing ≥ The DPOF setting can be established for up to 999 files. ≥ DPOF setting made on other devices may not be recognised by this unit. Please perform the DPOF settings on this unit. ≥ You cannot add the recording date to pictures to be printed with the DPOF settings. Copying still picture files This is for copying still picture files from the HDD to an SD card or vice versa. [HDD] [SD] ¬ Rotate the mode dial to select 1 .
LSQT1212_GC(EN).book 171 ページ ２００７年２月１５日 木曜日 午前１０時１３分 HDD and card management Press the MENU button, then select [SETUP] # [HDD STATUS] # [YES] and press the joystick. HDD and card management HDD management Formatting HDD This is for initializing HDD. [HDD] MENU Please be aware that if the HDD is formatted, then all the data recorded on the HDD will be erased. Store important data on a computer, etc. ¬ Rotate the mode dial to select . ¬ Select [HDD] in [MEDIA SELECT].
LSQT1212_GC(EN).book 172 ページ ２００７年２月１５日 HDD and card management 2 When the confirmation message appears, select [YES], then press the joystick. ≥ When formatting is complete, press the MENU button to exit the message screen. ≥ Use this unit to format SD cards. If an SD card is formatted on other products (such as a computer), the time spent for recording may become longer and you may not be able to use the SD card. ≥ Depending on the type of SD card being used, it may take time to format.
LSQT1212_GC(EN).book 173 ページ ２００７年２月１５日 木曜日 午前１０時１３分 With other products ≥ The channel set will differ depending on the terminal to which the unit is connected. With other products With a TV 5 Playback on TV [HDD] [SD] The motion pictures and still pictures recorded by this unit can be played back on a TV. ≥ Use the AC adaptor to free you from worrying about the battery running down. 1 Connect this unit and a TV.
LSQT1212_GC(EN).book 174 ページ ２００７年２月１５日 木曜日 午前１０時１３分 With other products DVD recorder with the AV/S cable (supplied) and then dub. (l below) [TV ASPECT] setting [16:9] [4:3] Insert the SD card into the SD card slot on the DVD recorder, then dub the contents onto the hard disk or a disc. ≥ For details on how to dub the images, refer to the operating instructions of the DVD recorder. ≥ This function’s default setting is [16:9].
LSQT1212_GC(EN).book 175 ページ ２００７年２月１５日 木曜日 午前１０時１３分 With other products 1 Connect this unit and a video device. * ≥ If the date and time display and function indication are unnecessary, cancel them before dubbing. (SDR-H250) (l 132, 174) S VIDEO IN VIDEO IN With a printer (PictBridge) AUDIO IN [HDD] [SD] A To print pictures by directly connecting this unit to the printer, use a printer compatible with PictBridge. (Read the operating instructions for the printer.
LSQT1212_GC(EN).book 176 ページ ２００７年２月１５日 木曜日 午前１０時１３分 With other products 3 Select a file to be printed, then press the joystick. [A4]: A4 size ≥ You cannot set paper sizes not supported on the printer. 8 Select the layout setting on [PAGE LAYOUT]. The number of pictures set is displayed. 4 Move the joystick up or down to select the desired number of prints, then press the joystick. [STANDARD]: Layout specific to the printer ≥ You can set up to 9 prints.
LSQT1212_GC(EN).book 177 ページ ２００７年２月１５日 木曜日 午前１０時１３分 With other products ≥ You may not be able to print still pictures recorded with other products. ≥ When the unit is connected directly to the printer, the DPOF settings cannot be used. ≥ Connect the printer directly to this unit. Do not use a USB hub.
LSQT1212_GC(EN).book 178 ページ ２００７年２月１５日 木曜日 午前１０時１３分 With a computer With a computer Before using with a computer What you can do with a computer When you have installed ImageMixer3 for Panasonic from the supplied CD-ROM and connected your computer to the unit, you can perform the operations described below. A B C D E F G A You can play back the images recorded by this unit on your computer or import the images to your computer.
LSQT1212_GC(EN).book 179 ページ ２００７年２月１５日 木曜日 午前１０時１３分 With a computer Operating environment ≥ A CD-ROM drive is necessary to install the supplied software. ≥ When 2 or more USB devices are connected to a computer, or when devices are connected through USB hubs or by using extension cables, proper operation is not guaranteed. ≥ Use the supplied USB cable when connecting to the computer. (Operation is not guaranteed with any other USB cables.
LSQT1212_GC(EN).book 180 ページ ２００７年２月１５日 木曜日 午前１０時１３分 With a computer ≥ Depending upon the environment of your computer, if it does not support Hi-Speed USB (USB 2.0), for example, frame dropout may occur, the audio may be intermittent, or the software may run slowly when you play back recorded images. ≥ Set the display resolution to 1024k768 (16 bits colour) or higher.
LSQT1212_GC(EN).book 181 ページ ２００７年２月１５日 木曜日 午前１０時１３分 With a computer Installation When installing the software, log on to your computer as the Administrator or with a user name with equivalent authorization. (If you do not have authorization to do this, consult your manager.) ≥ Before starting the installation, close any other software applications which are running. ≥ Do not perform any other operations on your computer while the software is being installed.
LSQT1212_GC(EN).book 182 ページ ２００７年２月１５日 木曜日 午前１０時１３分 With a computer 2 The computer must be rebooted for the application to work. ≥ Depending on the operating environment, you may be required to install DirectX 9.0c. If so, click [Yes], and install it. If you install the software in a computer that is not compatible with DirectX 9.0c, the computer may not work properly. If you are unsure whether or not your computer is compatible, contact the maker of your computer.
LSQT1212_GC(EN).book 183 ページ ２００７年２月１５日 木曜日 午前１０時１３分 With a computer 1 Connect this unit and a computer. About the computer display A When the unit is connected to a computer, it is recognised as an external drive. ≥ This unit supports only the readout of data using the computer. The computer cannot write data to the unit, or erase data from the unit. ≥ Depending on the operating environment of the computer, the shape of the drive icon and the drive name (Example: E:) will differ.
LSQT1212_GC(EN).book 184 ページ ２００７年２月１５日 木曜日 午前１０時１３分 With a computer Cam USB Device] is selected and click [OK]. SD card Click [Close], and you can safely disconnect the cable. ≥ If you disconnect the USB cable while the ACCESS/PC lamp or card access lamp is on or while or appears on the LCD monitor, it may damage the data. ≥ SD-Video format motion pictures are stored in the [PRG¢¢¢] folder. (“¢¢¢” denotes base-16 (hexadecimal) characters from 001 to FFF.
LSQT1212_GC(EN).book 185 ページ ２００７年２月１５日 木曜日 午前１０時１３分 With a computer 3 Connect this unit and a computer. ≥ If all of the data cannot be written onto one DVD disc, it will be written onto a second (or third, etc.) disc. When the writing on the first disc is completed, a message will appear so insert another disc of the same type as the first. A A USB cable (supplied) ≥ Insert the plugs as far as they will go. The unit and computer will not operate properly if the plugs are not inserted fully.
LSQT1212_GC(EN).book 186 ページ ２００７年２月１５日 木曜日 午前１０時１３分 With a computer 1 Connect this unit and a computer. The browser screen is displayed. 4 Select [SDR-H250]/[SDR-H21]/ [SDR-H20] (HDD) or [Removable Disk] (SD card) in [Source]. A A USB cable (supplied) ≥ Insert the plugs as far as they will go. The unit and computer will not operate properly if the plugs are not inserted fully. ≥ Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any other USB cables.
LSQT1212_GC(EN).book 187 ページ ２００７年２月１５日 木曜日 午前１０時１３分 With a computer Creating DVD-Video discs with the selected images Use ImageMixer3 to import the images recorded by this unit that you want to write to a DVD disc and then create a DVD-Video. DVD-Video discs created using this function can be played back on a DVD player or other device. ≥ You can edit motion pictures or add your favourite menus. For details, refer to software help.
LSQT1212_GC(EN).book 188 ページ ２００７年２月１５日 木曜日 午前１０時１３分 With a computer ≥ The folder itself can also be added to the list. ≥ You cannot add a still picture to the menu if it is not a file folder. For details, refer to software help. (l 182) A B C ∫ To import still pictures 1 Click [Still image] (D). 2 Click the desired folder (E), select the file (F) and add it to the list (G) by drag and drop. ≥ The folder itself can also be added to the list.
LSQT1212_GC(EN).book 189 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Others Others Menus Still picture recording menus Menu list Motion picture recording menus ∫ [BASIC] [SCENE MODE] (l 151) [GUIDE LINES] (l 149) [REC MODE] (l 139) [REC ASPECT] (l 150) [CLOCK SET] (l 132) ∫ [ADVANCED] [D.ZOOM] (l 144) [O.I.S.
LSQT1212_GC(EN).
LSQT1212_GC(EN).book 191 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Others ≥ In the following cases, the unit may not turn off even when you set this to [5 MINUTES]. jWhen using the AC adaptor jWhen connecting the unit to a computer or printer via the USB cable ∫ [BEEP SOUND] ≥ [OFF] ≥ [ON] This allows operations such as starting and ending recording to be signaled by a beep. When [OFF] is set, no beep is heard when an operation such as recording is started or ended.
LSQT1212_GC(EN).
LSQT1212_GC(EN).book 193 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Others ∫ Playback indications Locked motion pictures and still pictures Motion picture playback Number of recording pixels for still pictures SDR-H250: Still picture playback 3.1M 2 1M 0.3M 2048k1512 1920k1080 1280k960 640k480 SDR-H21/ SDR-H20: 0.3M 0.2 1 Playback ; Pause 5, 6, / Fast forward/rewind 7/8 Last/first scene paused 9/: Skip playback D/E Slow motion playback Frame-by-frame playback 0h00m00s 01 No.
LSQT1212_GC(EN).book 194 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Others Messages NO DATA. CAN NOT RECORD. HDD IS FULL. CAN NOT RECORD. THE NUMBER OF SCENES HAS EXCEEDED THE MAXIMUM LIMIT. BACKUP HDD THEN FORMAT. There are no images recorded on the media. The HDD is full or the number of scenes has reached the maximum limit so no further data can be recorded. Back up the data on the HDD to a computer, etc. and then delete unnecessary scenes or format the HDD. (l 162, 167, 171) RECOMMEND DATA BACK UP PERIODICALLY.
LSQT1212_GC(EN).book 195 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Others CHANGE TO MANUAL MODE. CANCEL NIGHT VIEW MODE. You are attempting to use a function that cannot be used simultaneously. TURN OFF THE VIDEO LIGHT. OPERATION FAILED. EXCESSIVE SHOCK DETECTED. PLEASE TRY AGAIN AFTER A WHILE. The unit has detected that it is being dropped so the operation has stopped. INTERNAL TEMPERATURE TOO HIGH. PLEASE TURN UNIT OFF AND WAIT A WHILE. The internal temperature of this unit is high so it cannot be operated.
LSQT1212_GC(EN).book 196 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Others Functions that cannot be used simultaneously Some functions in this unit are disabled or cannot be selected due to the unit’s specifications. The table below shows examples of functions restricted by various conditions.
LSQT1212_GC(EN).book 197 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Others Frequently asked questions What kind of cards can be used on this unit? SD Memory Cards and SDHC Memory Cards can be used. (l 117) Can motion pictures be recorded on an SD card? Yes, they can be recorded. To record motion pictures, we recommend using SD cards from 256 MB to 4 GB that conform to Class 2 or higher of the SD Speed Class Rating. Can I record continuously from the HDD to an SD card or vice versa? No, you cannot record continuously.
LSQT1212_GC(EN).book 198 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Others Can I write data from a computer onto the unit’s HDD or SD card? No, you cannot. This unit’s USB terminal is read only. Is playback possible on a computer? Use ImageMixer3. Is editing possible on a computer? Use ImageMixer3. ≥ Motion pictures that have been saved to the ImageMixer3 library can be edited. Can I use the DVD COPY function to copy still pictures as well? Yes, you can.
LSQT1212_GC(EN).book 199 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Others Troubleshooting Problem Check points This unit cannot be turned on. ≥ Is the battery fully charged? # Charge the battery using the AC adaptor. (l 121) ≥ The battery protection circuit may have operated. Attach the battery to the AC adaptor for 5 to 10 seconds. If the unit still cannot be used, the battery is faulty. ≥ Is the LCD monitor opened? This unit is turned off automatically.
LSQT1212_GC(EN).book 200 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Others Problem Check points The remote control does not function. ≥ Has the button-type battery of the remote control run out? # Replace it with a new button-type battery. (l 115) A function indication such as the remaining time indication or the elapsed time indication is not shown. ≥ If you set [SETUP]>[DISPLAY]>[OFF], indications other than warnings and date indications disappear.
LSQT1212_GC(EN).book 201 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Others Problem Check points Recorded still pictures are not clear. ≥ Are you trying to record small or finely detailed objects with [PICT. QUALITY] set at [ ]? # If you try to record small or finely detailed objects with [PICT. QUALITY] set at [ ], the images may break up into a mosaic-like pattern. Record with [PICT. QUALITY] set at [ ] instead. (l 143) Auto focus function does not work.
LSQT1212_GC(EN).book 202 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Others Problem The indication disappears. The screen is frozen. No operation can be performed. Check points ≥ Is this unit connected to a computer? # No operation can be performed on this unit when it is connected to a computer. ≥ Turn off the power to this unit. If the power cannot be turned off, remove the SD card then press the RESET button, or remove the battery or AC adaptor and then reattach it. After that, turn on the power again.
LSQT1212_GC(EN).book 203 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Others With a computer Problem Check points Even if connected by the USB cable, this unit is not recognised by the computer. ≥ The USB function selection screen does not appear if the USB cable is connected while the menu screen is displayed. # Close the menu screen before connecting the USB cable. ≥ Select another USB terminal on the computer. ≥ Check the operating environment.
LSQT1212_GC(EN).book 204 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Others Cautions for use About this unit ≥ The unit and card become warm after long operation, but this is not a malfunction. Keep the SD Card/Hard Disk Video Camera as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.). ≥ If you use the SD Card/Hard Disk Video Camera on top of or near a TV, the pictures and sound on the SD Card/Hard Disk Video Camera may be disrupted by electromagnetic wave radiation.
LSQT1212_GC(EN).book 205 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Others ≥ When storing the unit in a cupboard or cabinet, it is recommended that you place a desiccant (silica gel) in with it. About the battery The battery used in this unit is a rechargeable lithium-ion battery. It is susceptible to humidity and temperature and the effect increases the more the temperature rises or falls.
LSQT1212_GC(EN).book 206 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Others ≥ During prolonged use, the unit’s surfaces and the SD card will heat up slightly. This is normal. When inserting or removing the SD card, always set the OFF/ON switch to OFF. While this unit accesses the SD card (while / is being displayed/the access lamp is lit), do not open the card slot cover and remove the SD card, operate the mode dial, turn off the power or shake or impact the unit.
LSQT1212_GC(EN).book 207 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Others This is called automatic white balance adjustment. However, since the unit only stores white colour information under certain light sources, automatic white balance adjustment does not function normally under other light sources. 2) 10 000K 9 000K 8 000K 7 000K 3) 4) 6 000K 5) 5 000K 6) 1) 4 000K 7) 3 000K 8) 2 000K 9) 10) 1 000K The illustration above shows the range over which the auto white balance functions.
LSQT1212_GC(EN).book 208 ページ ２００７年２月１５日 Others recorded. The focus may become blurry when recording subjects at the beach, at night views or in scenes involving fireworks or special lights. Recording a subject in dark surroundings The unit cannot focus correctly because the light information that comes through the lens decreases considerably. Recording a fast-moving subject As the focus lens-inside moves mechanically, it cannot keep up with a fast-moving subject.
LSQT1212_GC(EN).book 209 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Others Specifications SD Card/Hard Disk Video Camera Information for your safety Power source: Power consumption: DC 7.9 V/7.2 V Recording 5.7 W (SDR-H250)/4.7 W (SDR-H21)/4.
LSQT1212_GC(EN).book 210 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Others Video output level 1.0 Vp-p, 75 ™ S Video output level Y: 1.0 Vp-p, 75 ™ C: 0.3 Vp-p, 75 ™ Audio output level (Line) 316 mV, 600 ™ USB Card reader function (No copyright protection support) HDD reader function Hi-Speed USB (USB 2.0) compliant PictBridge-compliant Dimensions (excluding the projecting parts) 70.1 mm (W) k 73.0 mm (H) k 120.8 mm (D) Mass (without battery and lens cap) SDR-H250: Approx. 450 g SDR-H21/SDR-H20: Approx.
LSQT1212_GC(EN).book 211 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Others Still pictures Recording media SD Memory Card: 8 MB/16 MB/32 MB/64 MB/128 MB/256 MB/512 MB/1 GB/2 GB (removable type) (FAT12 and FAT16 format corresponding) SDHC Memory Card: 4 GB (removable type) (FAT32 format corresponding) HDD: 30 GB* (fixed type) Compression JPEG (Design rule for Camera File system, based on Exif 2.
LSQT1212_GC(EN).book 212 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Others Number of recordable pictures on the HDD or an SD card SDR-H250: Picture size 3.
LSQT1212_GC(EN).book 213 ページ ２００７年２月１５日 木曜日 午前１０時１３分 Others SDR-H21/SDR-H20: Picture size 0.3M (640k480) 0.
LSQT1212_GC(EN).
LSQT1212_GC(EN).
LSQT1212_GC(EN).book 216 ページ ２００７年２月１５日 木曜日 午前１０時１３分 C LSQT1212 A F0207Td0 ( 7000 A ) Matsushita Electric Industrial Co., Ltd. Web site: http://panasonic.
