SD Video Camera Operating Instructions
Table Of Contents
- TABLE OF CONTENTS
- Before using
- Setup
- Recording
- Playback
- Editing
- With other products
- With a computer
- Others
- Menus
- LCD monitor displays
- Messages
- Troubleshooting
- Cautions for use
- Specifications
- Optional accessories
- Accessory Order Form (For USA Customers)
- Request for Service Notice (USA Only)
- Customer Services Directory (For USA only)
- Limited Warranty (For USA Customers)
- Warranty (For Canadian Customers)
- Spanish Quick Use Guide/Guía española para el uso rápido
62 VQT1R00
Connect the unit and AC adaptor (P.20), and set the mode dial to a setting
other than [OFF].
Connect the unit and printer with the USB cable (supplied).
Insert the plugs as far as they will go.
Select [PictBridge].
Select the still pictures to print.
Number of
copies (Max. 9)
Set the number of copies.
• To not print the picture, set “0”.
• Repeat steps
and to select up to 8 still
pictures for printing.
● Do not use any other USB connection cables except the supplied one.
(Operation is not guaranteed with any other USB cables.)
● Connect the unit directly to the printer without going through a USB hub.
● For paper size and print quality, etc., check printer settings.
● Avoid the following operations during printing. Otherwise, pictures will not print
correctly:
• Disconnecting the USB cable
• Opening the card/battery door
• Rotating the mode dial
• Shutting off power
With other
products
3
Printing pictures from
PictBridge printers