SD Video Camera Operating Instructions
Table Of Contents
- TABLE OF CONTENTS
- Before using
- Setup
- Recording
- Playback
- Editing
- With other products
- With a computer
- Others
- Menus
- LCD monitor displays
- Messages
- Troubleshooting
- Cautions for use
- Specifications
- Optional accessories
- Accessory Order Form (For USA Customers)
- Request for Service Notice (USA Only)
- Customer Services Directory (For USA only)
- Limited Warranty (For USA Customers)
- Warranty (For Canadian Customers)
- Spanish Quick Use Guide/Guía española para el uso rápido
46 VQT1R00
Recording
6
Recording manually
(motion/still pictures) (cont.)
Achieve natural colors (white balance)
Restore natural colors according to the light source when coloring has become
unnatural.
After steps
1
and
2
(P.44)
Select [ ]. Set the mode.
3/3NEXT BACK
Mode displayed
The mode is changed by one setting in the following sequence each time any
cursor button is pressed.
→ → →
Automatic Adjusted automatically
Indoor
(incandescent lighting)
In locations with incandescent or halogen lighting
Outdoor In bright, outdoor conditions
Set manually
(see below)
When ideal results cannot be produced with [
],
[
], [ ] modes (Mercury lighting, sodium lighting,
fluorescent lighting, hotel lighting, spotlights, sunsets,
sunrises, etc.)
Setting manually
Set colors based on white objects within the required lighting environment.
Set to [ ]. Fill the entire display with white
subject and begin making setting.
BACK
BACK
[ ] flashes.
BACK
BACK
Setting complete when flashing
stops.
• If the [ ] continues flashing after setting begins, the setting cannot be
made. (Because the range is too dark, etc.)
• If the [
] flashes during recording, adjustments cannot be completed for
the current subject. Remake the setting until matching the subject.