Operating Instructions

53
RQT8672
Resetting channel setting
You can add or delete channels, or change programme
positions.
1 While stopped
Press [FUNCTIONS].
2 Press [3, 4] to select “To Others”
and press [ENTER].
3 Press [3, 4] to select “Setup” and
press [ENTER].
4 Press [3, 4] to select “Tuning” and
press [1].
5 Press [3, 4] to select “Manual” and
press [ENTER].
To delete a programme position
Press [3, 4, 2, 1] to select a programme position and
press [A].
To add a blank programme position
Press [3, 4, 2, 1] to select a programme position and
press [B].
To move a TV station to another programme position
1 Press [3, 4, 2, 1] to select a programme position and
press [C].
2 Press [3, 4, 2, 1] to select the new programme
position to which you want to assign the TV station and
press [ENTER].
[Note]
When the unit connected to a Q Link-compatible TV with a
fully wired 21-pin Scart lead sets itself automatically (➡ 18),
only deletion of the programme position can be performed.
After performing steps 1–5
6 Press [3, 4, 2, 1] to select a
programme position and press
[ENTER].
e.g.
Press [3, 4] to select an item and press [1].
CH
OPEN/CLOSE

VIDEO Pl
+
RETURN
C
FUNCTIONS
B
A
3,4,2,1
ENTER
Numbered
buttons
Setup
Disc
Picture
Sound
Display
Connection
Tuning
Manual
Auto-Setup Restart
Download from TV
Others
ENTER
RETURN
TAB
SELECT
Manual Tuning
Pos Name Ch
Pos Name Ch
Delete
Add
Move
1 BBC1 22
2 BBC2 23
3 ITV 24
4 CH4
25
5 CH5
28
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
ENTER
RETURN
SELECT
A
C
B
To change detailed station settings
Pos To change the programme position in
which the TV stations are assigned
Press [3, 4] or numbered buttons to select
the number of the desired programme
position and press [ENTER].
Name To enter or change the name of a TV
station
Press [3, 4, 2, 1] to enter station name
and press [ENTER].
If the station name needs a blank space,
select the blank between “Z” and “¢”.
Channel To enter newly available TV stations or
change the channel number of an already
tuned TV station
Press [3, 4] or the numbered buttons to
enter the channel number of the desired TV
station.
Wait a few moments until the desired TV
station has been tuned.
After the desired TV station is tuned, press
[ENTER].
NICAM To select the type of sound to be
recorded
Press [3, 4] to select “Auto” and press
[ENTER].
≥Select “Off” if you want to record the
normal (mono) sound during a stereo,
bilingual or NICAM broadcast, or if the
stereo sound is distorted due to inferior
reception conditions.
Title Page To enter the Teletext title page for a
channel
Entering title page number allows the unit to
automatically record programme and station
names.
Press [3, 4] or numbered buttons to enter
the number and press [ENTER].
≥To find the correct title page for the station,
refer to its Teletext TV guide.
≥The unit’s clock must be set correctly.
Pos
Name
Channel
NICAM
Title Page
1
301
4
Auto
RETURN : leave
Manual
Tuning
BBC1
RETURN
SELECT
Changing the unit’s settings / Resetting channel setting
RT70-30.book Page 53 Thursday, April 13, 2006 1:45 PM