Operating Instructions

26
RQT8672
Timer recording
[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
See also the notes “Important notes for recording”
(➡ 22).
Preparation
≥Turn on the television and select the appropriate video
input to suit the connections to this unit.
≥Press [THEATER] to switch the remote control to operate
this unit.
≥Press [DVD] to select the DVD drive.
≥Check the time on the unit is correct.
≥Insert a disc (➡ 24).
Entering PlusCode number is an easy way of timer
recording. You can find these numbers in TV listings in
newspapers or magazines.
≥Using PlusCode numbers for Satellite stations
Set this unit to recognise PlusCode numbers for Satellite
stations before you start the following operations (➡ 19,
Timer recording from satellite receiver with VIDEO Plus+
system).
≥ You can enter up to 16 programmes up to a month in advance.
1 Press [VIDEO Plusr].
2 Press the numbered buttons to enter
the PlusCode number.
≥To correct the number
Press [2] to move back to correct a digit.
3 Press [ENTER].
≥Confirm the programme and make corrections if
necessary using [3, 4, 2, 1] (➡ 27, Manually
programming timer recordings, step 3).
≥ When “—” appears in the “Name” column, you cannot
set timer recording. Press [ 3 , 4 ] to select desired
programme position. After you have entered the
information of a TV station, it is kept in the unit’s memory.
≥You can also press [REC MODE] to change the
recording mode.
≥To enter programme name
Press [2, 1] to select “Programme Name” and
press [ENTER]. (➡ 43)
4 Press [ENTER].
The settings are stored and the programme goes to
timer recording standby.
The timer icon is displayed in left column.
“F” lights on the unit’s display to indicate timer
recording standby has been activated.
Repeat steps 1–4 to programme other recordings.
∫ To cancel recording when recording has already
begun (➡ 27)
∫ Notes on timer recording (➡ 27)
To exit the timer recording list
Press [PROG/CHECK].
Using VIDEO Plusr system to make
timer recordings
VIDEO Plus
+
DVD
PROG/CHECK
¢
∫
REC MODE
A
3,4,2,1
ENTER
THEATER
VIDEO Plusi
Numbered
buttons
Input PlusCode Number 0-9, and press ENTER.
VIDEO Plus+
Record
1:58 SP
Remain
12:53:00 15/ 7 TUE
RETURN
ENTER
Number
--
0 9
Timer
Recording
Mode
StopStartNameName Date
17:0016:0015/ 7 TUE SP
BBC1
Programme Name
1:58 SP
Remain
12:53:00 15/ 7 TUE
Timer
Recording
S
No. DateName
1
9
BBC1 15/ 7 TUE
01
New Time
r
F
Timer icon
Mode StopStartNo. DateName
Drive
space
SP
OK
20:0019:00BBC1
15/ 7 TUE
01
New Timer Programme
F
When “!” appears,
make sure the disc
has a sufficient
space.
RT70-30.book Page 26 Thursday, April 13, 2006 1:45 PM