Operating Instructions

18
RQT8672
TV Tuning (Auto Setup)
≥After pressing [Í] to turn the unit on for the first time, the
unit starts necessary setup.
If the setup screen does not appear, press [DVD], and turn
off this unit and on again.
1 Turn on the mains for the television
(and connected equipment) and select
the AV input for this unit.
2 Press [THEATER] to switch the remote
control to operate this unit.
3 Press [Í] to turn the unit on.
≥If the TV is Q Link compatible, it will start to
download TV tuning information to this unit.
≥If the TV is not Q Link compatible, Auto Setup will
start to tune in all available TV stations. This may
take about 5 minutes.
4 When setup has completed, the confirmation
screen appears.
Press [ENTER].
5 The owner ID settings screen appears.
Press [1] and press the numbered
buttons to enter your choice of a 4-
digit PIN number.
Make a note of the PIN number (don’t forget), as it is
not possible to return to the factory preset.
6 Press [ENTER] to store the PIN
number.
7 Press [2, 1] to select “Yes” and
press [ENTER].
The cursor moves to “Name”.
8 Press [1].
9 Press [3, 4] to select a letter and
then press [1] to move to next
character.
Repeat this to enter the name.
10 Press [ENTER] to store the name.
11 Press [4] and [1], and then repeat
steps 9, 10 to enter and store “House
No.” and “Postcode”.
12 Press [RETURN].
The Owner ID settings screen disappears.
To abort Auto Setup
Press [RETURN].
∫ If the clock setting menu appears
Set the clock manually (➡ 55).
∫ To confirm that stations have been tuned
correctly (
➡ 53)
∫ Resetting channel setting (
➡ 54)
∫ To enter the satellite station’s name (
➡ 53)
The name of the satellite station may not be set
automatically.
(“____” will appear under “Name” in the programme list.)
In this case, enter the name manually.
[Note]
If this unit is connected to a digital TV (Freeview), only the
analogue station’s tuning information will be downloaded.
VIDEO Plus
+
3,4,2,1
ENTER
¢
THEATER
VIDEO Plusi
RETURN
Í
Numbered
buttons
Download from TV
Pos 4
Download in progress, Please wait.
RETURN: to cancel
RETURN
Auto-Setup
Ch 1
Auto-Setup in progress, Please wait.
RETURN: to cancel
RETURN
Owner ID
RETURN : leave
PIN number
¢¢¢¢
Name
House No.
Postcode
RETURN
RT70-30.book Page 18 Thursday, April 13, 2006 1:45 PM