Operating Instructions

15
RQT8672
In the patterns “A”–”C” (12–14), you can also connect this unit and TV with the VIDEO OUT, S VIDEO OUT, and COMPONENT
VIDEO OUT terminals instead of connecting with a fully wired 21-pin Scart cable.
§This audio connection will enable you to play audio from
your television through your home theater system. Refer to
“Enjoying TV broadcast with this unit’s speakers” (56).
The S VIDEO OUT terminal achieves a more vivid picture
than the VIDEO OUT terminal. (Actual results depend on the
television.)
§This audio connection will enable you to play audio from
your television through your home theater system. Refer to
“Enjoying TV broadcast with this unit’s speakers” (56).
§This audio connection will enable you to play audio from
your television through your home theater system. Refer to
“Enjoying TV broadcast with this unit’s speakers” (56).
COMPONENT VIDEO terminals can be used for either
interlace or progressive output (65) and provide a purer
picture than the S VIDEO OUT terminal.
Connect to terminals of the same colour.
If you have a regular television (CRT: cathode ray tube)
Use component output with progressive “Off” (Factory
setting 51), even if it is progressive compatible, because
progressive output can cause some flickering. This is the
same for multi system televisions using PAL mode.
Other connections
Connecting to a television with VIDEO
terminal
VIDEO
IN
AUDIO
OUT
LR
S VIDEO
IN
Televisions rear panel
Video cable
(not included)
Back of this unit
Audio cable
§
(not included)
Connecting to a television with
S VIDEO terminal
VIDEO
IN
AUDIO
OUT
LR
S VIDEO
IN
Televisions rear panel
S Video cable
(not included)
Back of this unit
Audio cable
§
(not included)
Connecting to a television with COMPONENT VIDEO terminal
COMPONENT
VIDEO IN
VIDEO
IN
S VIDEO
IN
AUDIO
OUT
LR
Televisions rear panel
Video cable
(not included)
Back of this unit
Audio cable
§
(not included)
COMPONENT
VIDEO OUT
COMPONENT
VIDEO IN
CRT
This unit
Progressive
output
STEP 3 Video connections
RT70-30.book Page 15 Thursday, April 13, 2006 1:45 PM