Operating Instructions

13
RQT8672
B Connecting to a television and Satellite/Digital terrestrial receiver
Using a fully wired 21-pin Scart lead
≥You can use a variety of Q Link functions by connecting the unit to a Q Link compatible television (➡ 57).
≥You can enjoy high-quality viewing by connecting the unit to an RGB compatible television.
[Required[setting]
“AV1 Output” and “AV2 Input” in the Setup menu (➡ 51)
To view satellite/digital terrestrial programmes
Press [INPUT] to select the input channel “AV2” or put this unit in standby mode.
To record satellite/digital terrestrial programmes
Refer to “Recording from a satellite/digital terrestrial receiver” (➡ 29).
Connecting a terminal other than the 21-pin Scart terminal (➡ 15).
3
(
TV
)
AV1
(
EXT
)
AV2
VHF/UHF
RF IN
AV
RF
IN
RF
OUT
AV OUT
4
3
5
2
1
To the
aerial
RF coaxial lead
(included, black)
Fully wired 21-pin Scart lead
§
(For Q Link functions)
(not included)
Satellite/Digital
terrestrial receiver’s
rear panel
RF coaxial lead
(included, grey)
RF coaxial lead
(included, black)
Fully wired 21-pin Scart lead (For External Link function)
(not included)
Television’s rear panel
Back of this unit
§This connection will enable you
to play audio from your
television through your home
theater system. Refer to
“Enjoying TV broadcast with
this unit’s speakers” (➡ 56).
STEP 3 Video connections
RT70-30.book Page 13 Thursday, April 13, 2006 1:45 PM