Operating Instructions

5
TQBJ2039
Using the remote control
Insert the battery so the terminals (i and j) match
those in the remote control.
Point it at the remote control signal sensor on this unit.
≥ To avoid interference, please do not put any objects in front
of signal sensor.
Licenses
Connections
Connect the AC mains lead after all other
connections are completed.
1 Connect the antenna.
≥ Tape the antenna to a wall or column in a position with
the least amount of interference.
≥ If radio reception is poor, use an outdoor antenna (not
supplied).
[RS32]
This unit can receive DAB/DAB+ and FM stations
with the DAB antenna.
[RS30]
2 Connect the AC mains lead.
This unit consumes a small amount of AC power
(l 19) even when turned off.
≥ In the interest of energy conservation, if you will not be using
this unit for an extended period of time, unplug it from the
mains socket.
≥ Some settings will be lost after you disconnect the system.
You have to set them again.
The Bluetooth
®
word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by
Panasonic Corporation is under license.
Other trademarks and trade names are those of their respective
owners.
MPEG Layer-3 audio coding technology licensed from
Fraunhofer IIS and Thomson.
R6/LR6, AA
(Alkaline or manganese
battery)
12
Adhesive tape (not supplied)
DAB indoor antenna
(supplied)
Be sure to tighten
the nut fully.
Adhesive tape (not supplied)
FM indoor antenna (supplied)
To a mains socket
AC mains lead (supplied)
SC-RS32&30_EGEB_TQBJ2039.book 5 ページ ２０１７年３月２８日 火曜日 午後５時４０分