Operating Instructions DVD Home Theater Sound System Model No. SC-PT550 SC-PT850 The illustration shows SC-PT550. Before connecting, operating or adjusting this product, please read the instructions completely. Please keep this manual for future reference. Your unit may not look exactly the same as illustrated. Note “EB” on the packaging indicates the United Kingdom. The player plays DVD-Video marked with labels containing the region number “2” or “ALL”.
Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. ENGLISH Operations in these instructions are described mainly with the remote control, but you can perform the operations on the main unit if the controls are the same. GETTING STARTED Unless otherwise indicated, all illustrations shown are of SC-PT550.
Caution for AC Mains Lead If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local dealer. CAUTION! IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY.
GETTING STARTED ENGLISH -If you see this symbolInformation on Disposal for Users of Waste Electrical & Electronic Equipment (private households) This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling, please take these products to designated collection points, where they will be accepted on a free of charge basis.
Table of contents GETTING STARTED GETTING STARTED ENGLISH Caution for AC Mains Lead ...........................................................................................3 Safety precautions .....................................................................................................4 Accessories .............................................................................................................6 Preparing the remote control ..........................................................
Accessories 2 Remote control batteries 2 Stands 2 x stands with short cables (RYPX0191-S) 4 Stands 2 x stands with short cables (RYPX0191-S) 2 x stands with long cables (RYPX0201-S) 1 x short cable (REEX0449B-2L) 2 x long cables (REEX0449E-2K) 1 x short cable (REEX0449B-2L) SUB WOOFER 6 5 6 CENTER SURROUND Rch 4 3 2 1 SURROUND Lch FRONT Rch FRONT Lch CENTER 5 4 1 FRONT Lch SURROUND Rch 2 FRONT Rch 3 3 SURROUND Lch SURROUND Lch 4 1 FRONT Lch SURROUND Rch 2 FRONT Rch 5 3 SURROUND
Placement of speakers GETTING STARTED ENGLISH Setup example Place the front, center, and surround speakers at approximately the same distance from the seating position. The angles in the diagram are approximate. Main unit 2 3 4 FRONT (L, R) SURROUND (L, R) CENTER SUBWOOFER ENGLISH 1 Do not use a front speaker as a surround speaker or vice versa. Verify the type of speaker with the label on the rear of the front speaker.
GETTING STARTED ENGLISH Placement of speakers (continued) • Use only supplied speakers Using other speakers can damage the unit, and sound quality will be negatively affected. • Place speakers on flat secure bases. Take proper precautions to prevent the speakers from falling if you cannot set them up on an even surface. • Placing speakers too close to floors, walls, and corners can result in excessive bass. Cover walls and windows with thick curtains.
Performing QUICK SETUP The QUICK SETUP screen assists you to make necessary settings. ENGLISH To display the picture from this main unit, switch on the television and change the television’s input mode which is connected to this main unit (example : VIDEO 1, AV 1, etc.). To change your television’s input mode, refer to its operating instructions. • This remote control is able to perform some basic television operations (\ page 40). Shows the QUICK SETUP screen GETTING STARTED 1 3 Select “DVD/ CD”.
Speaker assembly ENGLISH Preparation • To prevent damage or scratches, lay down a soft cloth and perform assembly on it. • For assembly, use a Phillips-head screwdriver. • There is no difference between the right and left speakers and stands. • For optional wall mount (\ page 11). Make sure you have all the indicated components before starting assembly, setup, and connection.
Speaker installation options At least 30 mm Ø4.0 mm Wall or pillar 2 Fit the speaker securely onto the screw(s) with the hole(s) * Front/Surround speakers Attach to a wall without the base and stand. GETTING STARTED 1 Drive the screw (not included) into the wall ENGLISH 7 Attaching to a wall You can attach all of the speakers (except subwoofer) to a wall. • The wall or pillar on which the speakers are to be attached should be capable of supporting 10 k per screw.
Simple setup The illustration shows Making the connections GETTING STARTED ENGLISH Connect the AC mains lead only after all other connections have been made. • Ensure that you have the complete accessories before making the connections. Conserving power The main unit consumes a small amount of power, even when it is standby mode (approx. 0.8 W). To save power when the unit is not to be used for a long time, unplug it from the household mains socket.
ENGLISH Connect to the various television terminals. 7 Television with SCART terminal 7 Television with COMPONENT VIDEO IN terminals Television (not included) Video cables (not included) Using the SCART (AV) terminal You can change the video signal output from the SCART (AV) terminal from “RGB” to either “S-Video” or “Video” to suit the type of television you are using. Select “S-Video/ YPbPr” or “Video/YPbPr” from QUICK SETUP (\ page 9). Set “Video Mode” to “Off” (\ page 29, “HDMI” tab).
Disc information Discs that can be played ENGLISH 7 Commercial discs GETTING STARTED Disc Logo Indicated in these instructions by Remarks DVD-Video High quality movie and music discs. DVD-Audio Some DVD-Audio discs contain DVD-Video content. To play DVD-Video content, select “Play as DVD-Video” in Other Menu (\ page 26). Music discs with video. Including SVCD (Conforming to IEC62107).
ENGLISH 7 Discs that cannot be played DVD-RW version 1.0, DVD-ROM, CD-ROM, CDV, CD-G, SACD, Photo CD, DVD-RAM that cannot be removed from their cartridge, 2.6-GB and 5.2-GB DVD-RAM, and “Chaoji VCD” available on the market including CVD, DVCD and SVCD that do not conform to IEC62107. 7 Video systems • This unit can play PAL and NTSC, but your television must match the system used on the disc. • PAL discs cannot be correctly viewed on an NTSC television.
Overview of controls (continued) ENGLISH Remote control Television operations (40) GETTING STARTED Switch the main unit on or off (17) Change the television’s video input mode (40) Select disc’s title numbers and etc., Enter numbers (18) Adjust the television volume (40) Select the source DVD: DVD/CD (9) FM (32) EXT-IN: USB (37), AV *1 (40), AUX (36), D-IN (40), MUSIC P.
Disc — Basic play Using the main unit 3 Load a disc in the tray. Select “DVD/CD”. 4 ENGLISH Power on. Adjust the volume and start playback. DISC OPERATIONS 2 1 ENGLISH • Load double-sided discs so the label for the side you want to play is facing up. • For DVD-RAM, remove the disc from its cartridge before use.
Disc — Basic play (continued) Stop Enter numbers The position is memorised while “RESUME” is on the display. • Press [3, PLAY] to resume. • Press [7, STOP] again to clear the position. (while stopped) Example: To select 12, • Press [3, PLAY] to resume playback. with Playback control (PBC) Press [7, STOP] and then press the numeric buttons to cancel the PBC functions. Pause Note • The numeric buttons that can function depend on the number of tracks on the VCD.
Advanced play Displaying current playback condition • Repeat this step to program other items.
Playing data discs using navigation menus 7 Using the submenu Playing data discs Selecting “Play as Data Disc” in Other Menu (\ page 26) will be effective if the following functions are not available to play WMA, MP3 or JPEG contents. • Playing HighMAT™ discs (\ page 21). 1 While the Navigation Menu is displayed 2 To select an item. Playing items in order (Playback Menu) Items shown differ depending on the type of disc.
Playing HighMAT™ discs Playing RAM and DVD-R/-RW (DVD-VR) discs 1 • Titles appear only if the titles are recorded on the disc. • You cannot edit programs, playlists and disc titles. Playing the programs 2 To select the item. 1 • Repeat this step if necessary. Example: 2 To select the program. ENGLISH Menu: Takes you to the next menu which shows play lists or another menu • Press [3] to show the contents of the program and the disc. To exit the screen Press [7, STOP].
Using on-screen menus 2 Select the menu. 3 Go to the next menu Select Make the settings. Select Return to the previous menu Confirm Confirm Example: Example: Functions ENGLISH Title Chapter Time Audio Subtitle Angle ENGLISH DISC OPERATIONS 1 1/2 3/10 0:24:31 1 English 3 Spanish 1/2 Functions 1 English 2 French 3 Spanish Title Chapter Time Audio Subtitle Angle 4 Display the “Functions” screen. 1/2 3/10 0:24:31 1 English 3 Spanish 1/2 1 English 2 French 3 Spanish Press to exit.
Functions Menu (continued) with playback control To select number While the disc menu is displayed Press [5, ∞] ] Press [ENTER] • To change the numbers more quickly, press and hold [5, ∞]. Thumbnail To show thumbnail images Subtitle (with multiple subtitles) (SVCD only) To select subtitle language • On +R/+RW, a subtitle number may be shown for subtitles that are not displayed.
Using on-screen menus (continued) Other Settings (continued) ENGLISH DISC OPERATIONS ENGLISH 7 Picture Menu Picture Normal Mode Cinema1 Video Output Mode : Mellows images and enhances detail in dark scenes. Cinema2 : Sharpens images and enhances detail in dark scenes. Animation : Suitable for animation. Dynamic : Enhances the contrast for powerful images. User : Press [ENTER] to select “Picture Adjustment” (\ see below).
Other Settings (continued) 7 Audio Menu Dolby Pro (\ page 34, Dolby Pro Logic II) Logic II Dialogue To make the dialogue in movies Enhancer easier to hear (Dolby Digital, DTS, MPEG, 3-channel or higher, with the dialogue recorded in the center channel) On Off To zoom in and out manually – in 0.01-unit steps from “x1.00” to “x1.60” – in 0.02-unit steps from “x1.60” to “x2.00” • To change the steps quickly, press and hold [5, ∞].
Using on-screen menus (continued) Other Settings (continued) ENGLISH 7 Display Menu (continued) Bit Rate (motion picture part) Display On ↔ Off GUI SeeTo make the on-screen menu through transparent Off, On, Auto GUI To adjust the on-screen menu Brightness brightness –3 to +3 HDMI Indicates various information when Status connected with HDMI AV OUT terminal.
Changing the player settings 1 HDMI Make the settings. Select Item (Press and hold) Setting 2 • If you have not performed QUICK SETUP (\ page 9), the QUICK SETUP screen appears. Confirm Select the tab. Select 3 Go to item Select the item. 5 ENGLISH Tab 4 Display the Setup menu. Press to exit. DISC OPERATIONS Select Go to setting The settings remain intact even if you switch the unit to standby. Boxed items are the factory settings in the following table.
Changing the player settings (continued) QUICK SETUP enables successive settings of the items in the shaded area. Player settings (continued) 7 “Video” tab TV Aspect Choose the setting to suit your television and preference. • 4:3 Pan&Scan : Regular aspect television (4:3) The sides of the widescreen picture are cut off so it fills the screen (unless prohibited by the disc). • 4:3 Letterbox: Regular aspect television (4:3) Widescreen picture is shown in the letterbox style.
QUICK SETUP enables successive settings of the items in the shaded area. Player settings (continued) 7 “HDMI” tab VIERA Link (“HDAVI Control”) • On : When connect through the HDMI AV OUT terminal. Video is output in 480p/576p/720p/1080p (Progressive) or 480i/576i/1080i (Interlace) according to the setting of the “Video Output Mode” (\ page 24, Picture Menu).
Changing the player settings (continued) Changing the delay time of the speakers Effective when playing multi-channel audio (Center and surround speakers only) For optimum listening with 5.1-channel sound, all the speakers, except for the subwoofer, should be the same distance from the seating position. If you have to place the center or surround speakers closer to the seating position, adjust the delay time to make up for the difference.
Tips for making data discs • When there are more than eight groups, the eighth group onwards will be displayed on one vertical line in the menu screen. • There may be differences in the display order on the menu screen and computer screen. • This unit cannot play files recorded using packet write. DVD-RAM • Discs must conform to UDF 2.0. DVD-R/RW • Discs must conform to UDF bridge (UDF 1.02/ISO9660). • This unit does not support multi-session. Only the default session is played.
Using the radio Manual tuning Automatic presetting 1 1 To select “FM”. To select “FM”. OR (main unit) OR (remote control) 2 To select “MANUAL”. 3 (main unit) To select the frequency. (main unit) 2 Release the button when (main unit) (remote control) “FM AUTO” is displayed. The tuner tunes to the lowest frequency and starts to preset all the stations it can receive into the channels in ascending order.
Using sound effects Note • The following sound effects may not be available or have no effect depending on the type of source, disc as well as recording format or, when headphones are used. • You may experience a reduction in sound quality when these sound effects are used with some sources. If this occurs, turn the sound effects off. • It is not possible to turn on Surround Enhancer, EQ and Super Surround at the same time.
Using sound effects (continued) Enhancing the stereo sound: Dolby Pro Logic II Dolby Pro Logic II is an advanced decoder that derives 5-channel surround (Left and Right Front, Center, Left and Right Surround) from stereo sound sources, whether or not it has been specifically Dolby Surround encoded. Movie : Movie software, recorded in Dolby Surround. Music : Stereo sources Off : Cancel • This works only in DVD/CD, USB and Digital In mode. • “ŸPL II” lights when there is an effect.
Operating other equipment Optional antenna connection Use the outdoor antenna if radio reception is poor. FM outdoor antenna (Using a television antenna) FM outdoor antenna (not included) Rear panel of this main unit 75 coaxial cable (not included) • Disconnect the FM indoor antenna. • The outdoor antenna should be installed by a competent technician. Note • Disconnect the outdoor antenna when the unit is not in use. • Do not use the outdoor antenna during a lightning storm.
Operating other equipment (continued) Connecting with your HDMI-compatible television and set top box • Do not use the SCART cable when the HDMI cable is being used for connection. • When the HDMI cable is connected, there will be no video output from the SCART and COMPONENT VIDEO OUT terminals of the main unit. • Do not connect any kind of audio/video distribution devices between this unit and the television (such as an amplifier, etc.).
Optional Music Port connection and operation The Music Port allows you to connect and enjoy music from an external device (example: MP3 player) through your home theater system. Preparation To avoid distorted sound, make sure that any equalizer function of your external device is turned off. 1 Reduce the volume and connect the external device (not included). Plug type: Ø3.5 mm stereo mini plug 2 To select “MUSIC P.”. USB AV AUX D-IN (Digital In) MUSIC P.
Operating other equipment (continued) Optional USB connection and operation (continued) Note Compatible Devices • Devices which are defined as USB mass storage class: – USB devices that support bulk only transfer. – USB devices that support USB 2.0 full speed. Supported Formats File name Still pictures JPG Music MP3 WMA File extension .jpg .jpeg .mp3 .wma • CBI (Control/Bulk/Interrupt) is not supported.
Speaker control You can select whether audio is output from the home theater system or the television speakers by using the television menu settings. For details, refer to the operating instructions of your television. Home Cinema Theater speakers are active. • When the home theater system is in standby mode, changing the television speakers to theater speakers in the television menu will automatically turn the home theater system on and select “AUX” or “D-IN” as the source.
Operating other equipment (continued) Operating the television You can use the remote control to operate a Panasonic television. Aim the remote control at the television. To switch the television on or off To switch the television’s video input mode To play audio from your television through your home theater system Preparation Connect your equipment referring to “Connect to the various television terminals” (\ page 13). Press [EXT-IN] to select “AV” as the source.
Adjusting the Speaker output level automatically: Auto speaker setup 1 Preparation • Turn off the television before starting the Auto speaker setup. • Make sure that “DVD/CD” is selected as the source and there are no discs in the tray. • Ensure that headphones are disconnected. Connect the setup microphone. 2 Place the microphone at actual seating position. (At ear level when seated). 3 To start the setup. (Press and hold) ENGLISH Keep as quiet as possible during the Auto speaker setup.
Troubleshooting guide Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the chart do not solve the problem, consult your dealer for instructions. 7 Power Page No power. • Insert the AC mains lead securely. 12 The unit is automatically switched to the standby mode. • The Sleep timer was working and had reached the set time limit.
Page It takes time before play starts. • Play may take time to begin when an MP3 track has still picture data. Even after the track starts, the correct play time will not be displayed. This is normal. — Folders on a data CD are not displayed correctly. • Folders deeper than the eighth layer are displayed as the eighth layer. — A menu screen appears during skip or search. • This is normal for Video CDs. — Playback control menu does • Press [7, STOP] twice and then press [3, PLAY].
Troubleshooting guide (continued) 7 Menus The Setup menu cannot be accessed. Page • Select “DVD/CD” as the source. • Cancel program and random play. — 19 7 Picture abnormal or unviewable ENGLISH ENGLISH The picture on the television is not displayed correctly or disappears. RQTX0042 REFERENCE Picture size does not fit the screen. Menu is not displayed correctly. • The unit and television are using different video systems. Use a multi-system or PAL television.
7 Progressive video There is ghosting when progressive or HDMI output is on. Page • This problem is caused by the editing method or material used on DVD-Video, but should be corrected if you use interlaced output. Set “Video Output Mode” in Picture Menu to “480i” or “576i”. (Alternatively, press and hold [CANCEL] to switch to “480i” or “576i”.) • Disable the HDMI AV OUT connection and use other video connections. Make the settings in the following order: 1 Set “Video Mode” in the “HDMI” tab to “Off”.
Troubleshooting guide (continued) ENGLISH 7 Unit displays Page The display is dark. • Select “Bright” in “FL Dimmer” in the “Others” tab. 29 “NO PLAY” • You inserted a disc the unit cannot play; insert one it can. • You inserted a blank disc. • You inserted a disc that has not been finalized. 14 — — “NO DISC” • You have not inserted a disc; insert one. • You have not inserted the disc correctly; insert it correctly. — 17 “OVER CURRENT ERROR” • The USB device is drawing too much power.
Language code list 7265 Romanian: 8279 Afar: 6565 Hebrew: 7387 Russian: 8285 Afrikaans: 6570 Hindi: 7273 Samoan: 8377 Albanian: 8381 Hungarian: 7285 Sanskrit: 8365 Ameharic: 6577 Icelandic: 7383 Scots Gaelic: 7168 Arabic: 6582 Indonesian: 7378 Serbian: 8382 Armenian: 7289 Interlingua: 7365 Serbo-Croatian: 8372 Assamese: 6583 Irish: 7165 Shona: 8378 Aymara: 6589 Italian: 7384 Sindhi: 8368 Azerbaijani: 6590 Japanese: 7465 Singhalese: 8373 Bashkir: 6665
Glossary CPPM (Content Protection for Prerecorded Media) A copy protection system used for DVD-Audio files. This unit supports CPPM. Decoder A decoder restores the coded audio signals on DVDs to normal. This is called decoding. Dolby Digital This is a method of coding digital signals developed by Dolby Laboratories. Apart from stereo (2-channel) audio, these signals can also be multi-channel audio. A large amount of audio information can be recorded on one disc using this method.
Specifications FM TUNER, TERMINALS SECTION Preset Memory RMS Output Power: Dolby Digital Mode Front Ch 125 W per channel (3 ), 1 kHz, 10 % THD Surround Ch 125 W per channel (3 ), 1 kHz, 10 % THD Center Ch 250 W per channel (6 ), 1 kHz, 10 % THD Subwoofer Ch 250 W per channel (6 ), 100 Hz, 10 % THD Total RMS Dolby Digital mode power 1000 W DIN Output Power: Dolby Digital Mode Front Ch 75 W per channel (3 ), 1 kHz, 1 % THD Surround Ch 75 W per channel (3 ), 1 kHz, 1 % THD Center Ch 145 W per channel (6
Specifications (continued) SPEAKER SECTION DISC SECTION ENGLISH Discs played (8 cm or 12 cm) (1) DVD (DVD-Video, DVD-Audio) (2) DVD-RAM (DVD-VR, MP3*2, *5, JPEG*4, *5) (3) DVD-R (DVD-Video, DVD-VR, MP3*2, *5, JPEG*4, *5) (4) DVD-R DL (DVD-Video, DVD-VR) (5) DVD-RW (DVD-Video, DVD-VR, MP3*2, *5, JPEG*4, *5) (6) +R/+RW (Video) (7) +R DL (Video) (8) CD, CD-R/RW [CD-DA, Video CD, SVCD*1, MP3*2, *5, WMA*3, *5, JPEG*4, *5, HighMAT Level 2 (Audio and Image)] *1 Conforming to IEC62107 *2 MPEG-1 Layer 3, MPEG-2 L
GENERAL Subwoofer SB-HW550 Type 1 way, 1 speaker system (Bass reflex) Speaker unit(s) Woofer Input power (IEC) Output sound pressure Frequency range Impedance 6 16 cm Cone type 250 W (Max) 81 dB/W (1.0 m) 31 Hz to 220 Hz (–16 dB) 37 Hz to 180 Hz (–10 dB) Power supply AC 230 to 240 V, 50 Hz Power consumption Main unit Main unit 135 W 135 W Dimensions (W x H x D) 430 mm x 60 mm x 363 mm Mass Main unit approx. 3.
Maintenance Clean this unit with a soft, dry cloth. – Never use alcohol, paint thinner or benzine to clean this unit. – Before using chemically treated cloth, carefully read the instructions that came with the cloth. – Do not use commercially available lens cleaners as they may cause malfunction. (Cleaning the lens is generally not necessary although this depends on the operating environment.) Manufactured under license from Dolby Laboratories.
