Operating Instructions

9
RQTX0100
Turn off all equipment before connection and read the appropriate operating instructions.
Do not connect the AC mains lead until all other connections are complete.
(Continued on next page)
1
Speaker connections
2
Radio antenna connections
Using an FM outdoor antenna (optional)
step
3
Cable connections
CENTERSUBWOOFER FRONT
6 5 2 1 4 3
L
R
L
R
SURROUND
SPEAKERS
FM ANT
(75 )
1 2
This unit
Lch
SURROUND
3
CENTERSUBWOOFER FRONT
6 5 2 1 4 3
L
R
L
R
SURROUND
Connecting the speakers to this unit:
Connect to terminals of the same colour.
Speaker Terminal/connector colour
1 FRONT (L) White
2 FRONT (R) Red
3 SURROUND (L) Blue
4 SURROUND (R) Grey
5 CENTER Green
6 SUBWOOFER Purple
Insert the wire fully.
i: White
j: Blue
Push!
e.g. [
[ PT560 [ ]
Surround
speaker (L)
Speaker cable sticker (included)
Attach the speaker-cable stickers
to make connection easier.
≥
Be careful not to cross (short circuit) or
reverse the polarity of the speaker wires
as doing so may damage the speakers.
DO
NOT
This unit
Insert fully.
FM ANT
(75 )
Adhesive tape
FM indoor antenna
(included)
Affix this end of the antenna
where reception is best.
This unit
FM ANT
(75 )
FM outdoor antenna
[Using a TV antenna
(not included)]
≥The antenna should be installed
by a competent technician.
75 ≠ coaxial cable
(not included)
Use outdoor antenna if radio reception is poor.
≥Disconnect the antenna when the unit is not in use.
≥Do not use the outdoor antenna during an electrical storm.
This unit
Use the antenna plug
adaptor (included).
step 3
SC-PT560_860E-RQTX0098-R_eng.book Page 9 Monday, December 3, 2007 4:50 PM