Operating instructions

RQTV0212
4
Getting started
Step 1Step 1 - Making the connections - Making the connections
Connect the AC mains lead only after all other connections have been made.
To household
mains socket
4 Connect the AC mains lead.
FOR THE UNITED KINGDOM ONLY
READ THE CAUTION FOR THE AC
MAINS LEAD ON PAGE 3 BEFORE
CONNECTION.
The included AC mains lead is for use
with this unit only. Do not use it with other
equipment.
Insertion of connector
Even when the connector is perfectly inserted,
depending on the type of inlet used, the front
part of the connector may jut out as shown
in the drawing. However there is no problem
using the unit.
ConnectorAppliance inlet
1 Connect the speaker cables.
Red (ª)
Black (·)
Red (ª)
Black (·)
Incorrect connection can damage the unit.
2 Connect the DAB “T” antenna
The cross bar of the T should be kept fi rmly stretched.
Find a position with good reception.
There is a function on the unit to check signal quality.
For best reception
A DAB outdoor antenna is recommended
(refer to page 5).
Be sure to fully
tighten the screw.
Adhesive tape
Tape the FM antenna to a wall or column, in a position
with least amount of interference.
3 Connect the FM antenna.
Adhesive tape
FM antenna
PM4DB_EB.indd 4PM4DB_EB.indd 4 2/1/07 4:56:18 PM2/1/07 4:56:18 PM