Operating instructions

8
RQT7923
Checking which CDs are in the trays
(CD CHECK)
CD-DA MP3
1
Press [CD CHECK].
CD CHECK
2
Press the button again to close the trays.
• The tray with a CD being played will not open.
• If the player is stopped, all trays will open.
• Do not remove or insert CDs during CD check.
• Do not pull out the trays during CD check.
• 8 cm CDs cannot be checked.
CD display
This function allows you to display the information
on the current track.
Press [DISPLAY] repeatedly during play or pause mode.
CD-DA
Remaining play time Elapsed play time
MP3
Elapsed time Remaining play time Album name
ID3 (Artist) ID3 (Track) ID3 (Album) Track name
• Maximum number of displayable characters: approximate 30
• This unit supports ver. 1.0 & 1.1 ID3 tags. Text data that is not
supported will not be displayed.
• ID3 is a tag embedded in MP3 track to provide information about
the track.
Advanced CDs and MP3 functions
Direct access play
This function allows you to start play from a specifi c track.
CD-DA
Press the numeric buttons to select and play your
desired track.
MP3
1
Press [ALBUM or ] to select the album.
2
Press [3/FF/¢] once and then the numeric buttons
to select and play your desired track.
For two-digit track, press [
h 10] once then the two digits.
For three-digit track, press [ h 10] twice then the three digits.
• This function does not work during any random/program mode.
Repeat play
CD-DA
MP3
You can repeat program play or other selected
play mode.
Press [REPEAT] before or during play.
“REPEAT ON” and “
” are displayed.
To cancel
Press [REPEAT] again.
“REPEAT OFF” is displayed and “ ” is cleared.
Marking a track
CD-DA MP3
Enable you to mark one track for each loaded disc
so that you can directly play the track later.
During play, press and hold the [MARKER] until
“STORING” blinks on the display to mark your favorite
track.
Press [MARKER] during play or stop mode to recall and
play a marked track.
• The marker memory is cleared when you open the CD tray.
• This function does not work during any random/program mode.
Program play
This function allows you to program up to 24
tracks.
CD-DA
1
Press [CD 6] and then [CLEAR 7].
2
Press [PROGRAM].
3
Press [DISC].
4
(Within 10 seconds or so)
Press [1]~[5] to select your desired disc.
5
Press the numeric buttons to select your desired
track.
Example:
Program number
Track number
�
Program play
indicator
6
Repeat steps 3 to 5 to program other tracks.
7
Press [CD 6] to start play.
MP3
1
Press [CD 6] and then [CLEAR 7].
2
Press [DISC].
3
(Within 10 seconds or so)
Press [1]~[5] to select your desired disc.
4
Press [CLEAR 7].
5
Press [PROGRAM].
6
Press [Album or ] to select your desired album.
7
Press [3/FF/¢] once and then the numeric buttons
to select your desired track.
Example:
Album number
Track number
�
8
Press [ENTER].
Repeat steps 6 to 8 to program other tracks.
9
Press [CD 6] to start play.
CDs and MP3 – Play (Continued)
PM31_7923-P.indd 8 11/30/04 6:51:45 PM