Operating instructions
Recording operations
21
RQT5243
Recording CDs
Auto edit recording (AUTO)
³Tracks are recorded in the order in which they are found on the CD.
³Tracks are cut in the middle when the end of the tape is reached,
but recording is resumed on side B.
³Recording always starts from the beginning of side A on the tape.
(Tapes are automatically rewound.)
³Be sure to use cassette tapes which have tabs on both side A and
side B.
[Before\recording]
Perform steps [1], [3] and [4] on page 20.
1
Press [CD EDIT] to select “AUTO”.
Each time you press the button;
AUTO>1-REC>OFF
^-----------------------------------}
2
Press [´/´ ; REC/REC PAUSE].
The tape automatically rewinds, and recording from the first
track begins after a 10 second interval of silence.
Reverse mode is displayed as “d”.
When the recording is completed, the auto edit recording mode
is automatically cancelled.
To stop recording
Press [º] on the cassette deck control section.
Both the tape and the CD stop.
To record programmed track(s)
1. Program the track(s) you want (á steps [2]–[4] on page 15).
2. Perform steps [1] and [2] above to start recording.
Note
³Auto edit recording cannot be used in combination with random play
and repeat play.
³If auto edit recording is started when setting-up the sleep timer or
when the timer is activated, this will automatically cancel the sleep
timer.
1
2
1
2
REC/REC PAUSE
¥/¥;
CD EDIT
FWD
AUTO
1
5
9
13
6
10
14
7
11
15
8
12
2 3 4
FWD
AUTO
1
5
9
13
6
10
14
7
11
15
8
12
2 3 4
FWD
AUTO
1
5
9
13
6
10
14
7
11
15
8
12
2 3 4
REC
FWD
AUTO
1
5
9
13
6
10
14
7
11
15
8
12
2 3 4
REC
FWD
AUTO
1
5
9
13
6
10
14
7
11
15
8
12
2 3 4
1-23e.p65 11/9/99, 4:35 PM21