Operating instructions

Recording operations
18
RQT5243
A
B
2
3
1
4
3
1
4
REC/REC PAUSE
¥/¥;
REV MODE
2
OPEN
∫
REC
FWD
Before recording
Types of tapes which can be recorded
correctly
The system automatically identifies the type of tape.
This system cannot correctly record or erase metal position tapes .
To record from the beginning of the tape A
You cannot record on the leader part of the tape. Before recording,
wind the tape past the leader to a point where recording can start
immediately.
The effect of volume, sound quality, and
sound virtualizer on recording
These have no effect on recording.
They can be changed for playback.
To erase a recorded sound B
1
Press [º].
2
Press [REV MODE] on the remote control to se-
lect the reverse mode.
3
Press [< OPEN] and insert the tape.
Close the holder by hand.
Tape direction is automatically set to “I”.
4
Press [´/´ ; REC/REC PAUSE].
NORMAL POSITION/TYPE I 4
HIGH POSITION/TYPE II 4
METAL POSITION/TYPE IV t
Recording part
Leader tape (no recording can be made)
Your attention is drawn to the fact that recording pre-record-
ed tapes or discs or other published or broadcast material
may infringe copyright laws.
1-23e.p65 11/9/99, 4:35 PM18