Operating Instructions Home Theater Audio System Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Please keep this manual for future reference. Model No. SC-HTE80 “EB” indicates the United Kingdom model.
Do the procedures with the remote control. You can also use the buttons on the main unit if they are the same. Your system and the illustrations can look differently. Safety precautions WARNING! Unit • To reduce the risk of fire, electric shock or product damage, – Do not expose this unit to rain, moisture, dripping or splashing. – Do not place objects filled with liquids, such as vases, on this unit. – Use only the recommended accessories. – Do not remove covers. – Do not repair this unit by yourself.
Check and identify the supplied accessories. Use numbers indicated in parentheses when asking for replacement parts. (Product numbers correct as of August 2013. These may be subject to change.) 1 AC mains lead For the United Kingdom and Ireland (K2CT2YY00097) If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local dealer. Before use Remove the connector cover.
Overview of controls A Standby/on switch [`], [1] I Remote control sensor Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power.
Preparing the remote control Placement Before using When the TV is less than 30 kg, and the pedestal of the TV is within 460 mm (width) by 280 mm (depth), you can put the TV on top of the system. Remove the insulation sheet before you use the remote control for the first time. Otherwise, put the system at the side of the TV (right side) or in a rack. 1 While pressing the stopper, pull out the battery holder. 2 Insert a new battery with the (+) side facing up.
Making the connections Connect a non-ARC compatible TV Switch off all equipment before connection. Components and cables are sold separately. Connect the AC mains lead only after all the other connections have been made. Connecting an HDMI compatible device You can connect a Blu-ray Disc player, DVD player, etc. and listen to the audio through this system. Connecting the TV Connect an ARC compatible TV Connect to the ARC compatible terminal of the TV with an ARC compatible high speed HDMI cable.
Connecting the AC mains lead For the United Kingdom and Ireland READ THE “Caution for AC mains lead” BEFORE CONNECTION. AC mains lead (supplied) To household mains socket Do not use an AC mains lead from other equipment. Conserving power The system consumes a small amount of power (Z“Specifications”) when it is in standby mode. Disconnect the power supply if you do not use the system. Bluetooth® connection e.g., Set-top box You can connect and play an audio device wirelessly through Bluetooth®.
Basic control One-Touch Connection (NFC) Sound menu Preparation Switch on the TV and/or connected device. For NFC-compatible Android™ devices only 1 1 Press [1] to switch on the system. 2 Press [INPUT] repeatedly to select the source. TV 3 BD/DVD AUX BLUETOOTH Press [ VOL ] to adjust the volume of the system. Volume range: 0 to 100 When “BLUETOOTH” is selected as the source Select this system as the output speaker from the menu of the connected Bluetooth® device.
DUAL AUDIO AGC LOW VOL MODE The 3D Clear Mode Dialog feature creates a sound field similar to the sound coming from a TV screen and makes dialogues clearer. ON: 3D Surround, Clear Mode Dialog and Dolby Virtual Speaker effect OFF: Dolby Virtual Speaker effect The setting is set back to “ON” every time you switch on the system. Sets the preferred audio channel mode when there are two audio modes received by the unit.
Linked operations with the TV (VIERA Link™ HDAVI Control™) What is VIERA Link “HDAVI Control”? VIERA Link “HDAVI Control” is a convenient function that offers linked operations of this system, and a Panasonic TV (VIERA) under “HDAVI Control”. You can use this function by connecting the equipment with an HDMI cable. See the operating instructions for connected equipment for operational details. Preparation A Confirm that the HDMI connection has been made.
Troubleshooting HDMI Bluetooth® Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated do not solve the problem, consult your dealer for instructions. This system does not operate correctly. • Check the HDMI connections. • Switch off the system, disconnect the AC mains lead, disconnect the HDMI cable and connect it again. Pairing cannot be done. • Check the Bluetooth® device condition.
Main unit displays “F61” • There is a problem with the amplifier of the system. • Disconnect the AC mains lead and consult the dealer. “F70 HDMI” • Check HDMI connection. • Switch off the system and then switch it on again. • Disconnect the HDMI cable. “F76” • There is a problem with the power supply. • Disconnect the AC mains lead and consult the dealer. System memory reset Reset the memory when the following situations occur: • There is no response when buttons are pressed.
Specifications General Bluetooth® section Bluetooth system specification ® Amplifier section RMS output power: Dolby Digital mode Front Ch 30 W per channel (6 Ω), 1 kHz, 10% THD Subwoofer Ch 60 W per channel (3 Ω), 100 Hz, 10% THD Total RMS Dolby Digital mode power 120 W Wireless equipment classification Supported profiles Operating frequency Operation distance Version 3.
For the United Kingdom and Ireland Licenses Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. Declaration of Conformity (DoC) Hereby, “Panasonic Corporation” declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Customers can download a copy of the original DoC to our R&TTE products from our DoC Server: http://www.doc.panasonic.
Limited Warranty (Only For Australia) Panasonic Warranty 1. The product is warranted for 12 months from the date of purchase. Subject to the conditions of this warranty Panasonic or its Authorised Service Centre will perform necessary service on the product without charge for parts or labour, if in the opinion of Panasonic, the product is found to be faulty within the warranty period. 2.
For the United Kingdom and Ireland customers Sales and Support Information Customer Communications Centre • For customers within the U.K.: 0844 844 3899 • For customers within Ireland: 01289 8333 • Monday – Friday 9:00am – 5:00pm (Excluding public holidays). • For further support on your product, please visit our website: www.panasonic.co.uk Direct Sales at Panasonic U.K.
