SC-HTE50EB_VQT4E88.book 1 ページ ２０１２年２月２４日 金曜日 午後７時５４分 Operating Instructions Home Theater Audio System Model No. SC-HTE50 Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Please keep this manual for future reference. Model number suffix “EB” denotes UK model.
SC-HTE50EB_VQT4E88.book 2 ページ ２０１２年２月２４日 金曜日 午後７時５４分 Safety precautions WARNING Unit ≥ To reduce the risk of fire, electric shock or product damage, jDo not expose this unit to rain, moisture, dripping or splashing. jDo not place objects filled with liquids, such as vases, on this unit. jUse only the recommended accessories. jDo not remove covers. jDo not repair this unit by yourself. Refer servicing to qualified service personnel.
ページ ２０１２年２月２４日 金曜日 午後７時５４分 Caution for AC Mains Lead For your safety, please read the following text carefully. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5-ampere fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark Ï or the BSI mark Ì on the body of the fuse.
SC-HTE50EB_VQT4E88.book 4 ページ ２０１２年２月２４日 金曜日 午後７時５４分 Table of Contents Safety precautions .......................................................................................... 2 Caution for AC Mains Lead ............................................................................ 3 Before use Supplied items ................................................................................................. 5 System (SC-HTE50) ...........................................................................
SC-HTE50EB_VQT4E88.book 5 ページ ２０１２年２月２４日 金曜日 午後７時５４分 Before use ≥ The illustrations shown may differ from your unit. ≥ Operations in these Operating Instructions are described mainly with the remote control, but you can perform the operations on the active subwoofer if the controls are the same. Check the supplied accessories before using the system.
SC-HTE50EB_VQT4E88.book 6 ページ ２０１２年２月２４日 金曜日 午後７時５４分 Control reference guide Active subwoofer 1 2 3 5 4 6 7 9 8 10 11 12 13 Active subwoofer (front) 1 2 3 4 5 Standby/on switch (Í/I) Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power.
SC-HTE50EB_VQT4E88.book 7 ページ ２０１２年２月２４日 金曜日 午後７時５４分 Remote control Remove the insulation sheet A before using. 1 2 5 6 7 3 ∫ To replace a button-type battery 1 While pressing the stopper B, pull out the battery holder.
HTE50EB~Body_mst.fm 8 ページ ２０１２年３月１日 木曜日 午後２時３１分 Information for your safety Getting started Caution ≥ The active subwoofer and supplied speakers are to be used only as indicated in these instructions. Failure to do so may lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified service person if damage has occurred or if you experience a sudden change in performance.
SC-HTE50EB_VQT4E88.book 9 ページ ２０１２年２月２４日 金曜日 午後７時５４分 Connections ≥ Turn off all equipment before connection and read the appropriate operating instructions. Do not connect the AC mains lead until all other connections are complete. ∫ HDMI The HDMI connection supports VIERA Link “HDAVI Control” (> 17) when used with a compatible Panasonic TV. ≥ Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilised. It is recommended that you use Panasonic’s HDMI cable.
SC-HTE50EB_VQT4E88.book 10 ページ ２０１２年２月２４日 金曜日 午後７時５４分 [B] Not labelled “HDMI (ARC)” HDMI IN TV A OPTICAL OUT B Active subwoofer A HDMI cable (not supplied) B Optical digital audio cable (not supplied) Connection with other devices You can direct the audio signal from the connected Blu-ray Disc player, DVD player, Set Top Box, etc. to this system. ≥Refer to the operating instructions of the set top box for the optimal video connection. Preparation ≥ Connect this system to the TV. (> 9) B A e.g.
SC-HTE50EB_VQT4E88.book 11 ページ ２０１２年２月２４日 金曜日 午後７時５４分 Speaker cable connection Preparation Connecting the speaker cables Insert the wire fully while pushing the lever. r: White s: Blue line Connector Push Front speaker ≥ To make sure that the speaker cable is connected to the correct speaker, match the colour of the speaker connector with the colour of the L/R indicator on the speaker label so as not to connect the speaker cable to the wrong speaker. Connect to the terminals of the same colour.
SC-HTE50EB_VQT4E88.book 12 ページ ２０１２年２月２４日 金曜日 午後７時５４分 Speaker installation option Attaching to a wall Drive a screw (not supplied) into the wall. ≥ Use the measurements indicated below to identify the screwing positions on the wall. ≥ Leave at least 20 mm of space above and 10 mm of space each side of the speaker to allow enough space for fitting the speaker. ≥ The position in the wall where the screw is to be attached as well as the screw should be capable of supporting over 10 kg.
SC-HTE50EB_VQT4E88.book 13 ページ ２０１２年２月２４日 金曜日 午後７時５４分 Speaker fall prevention measures To prevent the speakers from falling, it is recommended, as an additional protection measure, to attach the speakers to the wall with a fall prevention cord (hereafter “cord”). ≥ Consultation with a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that may not have strong enough support is recommended (> 12).
SC-HTE50EB_VQT4E88.book 14 ページ ２０１２年２月２４日 金曜日 午後７時５４分 Using this unit Operations Preparation Press [i VOL j] to adjust the volume of the speakers. ≥ Turn on the TV. ≥ Volume range: 1 to 100§ Press [i SUBWOOFER j] to adjust the subwoofer level (bass sound). ≥ Subwoofer levels: 1 to 4§ (Factory preset: 3) 1 2 Press [i SUBWOOFER j] to display the current level. While the level is displayed: Press [i SUBWOOFER j] to adjust the level.
SC-HTE50EB_VQT4E88.book 15 ページ ２０１２年２月２４日 3D sound This system provides a feeling that the sound and the image are as one. The 3D sound effect will be applied to Multi-channel audio sources as a factory preset. 金曜日 午後７時５４分 To adjust the dialog effect level This setting will change the level of the Clearmode dialog effect. (> left) e.g., Image of 3D sound field 3D surround effect Clear-mode dialog With this effect you can enjoy a surround sound effect similar to 5.1ch.
SC-HTE50EB_VQT4E88.book 16 ページ ２０１２年２月２４日 Audio output modes As a factory preset, Dolby Virtual Speaker and the 3D surround effects will be applied to Multichannel audio sources, such as those from a Bluray Disc player or DVD player, etc. By changing the audio output setting, it is possible to apply the Dolby Virtual Speaker and 3D surround effects to 2ch audio sources, such as the audio from the TV. To change the audio output mode Press and hold [MUTE] for more than 2 sec.
SC-HTE50EB_VQT4E88.book 17 ページ ２０１２年２月２４日 金曜日 午後７時５４分 Linked operations with the TV (VIERA Link “HDAVI ControlTM”) What is VIERA Link “HDAVI Control”? Preparation 1 Confirm that the HDMI connection has been made. (> 9, 10) 2 Set the “HDAVI Control” operations on the connected equipment (e.g., TV). 3 For the optimal “HDAVI Control” operations change the following settings on the connected TV§1. ≥ Set the default speaker settings to this system.§2 ≥ Set the speaker selection settings to this system.
SC-HTE50EB_VQT4E88.book 18 ページ ２０１２年２月２４日 金曜日 午後７時５４分 Advanced operations Changing the dual audio Press and hold [BD/DVD] on remote controller for more than 2 sec. ≥ The indicator for the current setting blinks for 10 sec. 1 Change the dual audio from main to secondary. 1 Confirm the digital audio output setting on the connected TV or player, etc. is set to “Bitstream”. 2 Press and hold [TV] for more than 2 sec.
ページ ２０１２年２月２４日 ≥ Turn off all other Panasonic products. ≥ Turn on this system. Change the remote control code to code 2: Aim the remote control at this system’s remote control sensor. 2 Press and hold [MUTE] and [BD/DVD] on the remote control for more than 4 sec. ≥ All the indicators will blink for 10 sec when the code of this system is changed. 1 ≥ The setting is maintained until it is changed again. ≥ If this system does not operate after changing the code, repeat steps 1 and 2.
SC-HTE50EB_VQT4E88.book 20 ページ ２０１２年２月２４日 HDMI This system does not operate correctly. If the HDMI cable is connected to the wrong terminal (HDMI IN or HDMI OUT), this system will not operate correctly. Turn this system off, disconnect the AC mains lead and reconnect the HDMI cable(s). (> 9, 10) VIERA Link related operations no longer function properly. ≥ Check the VIERA Link setting on the connected devices.
SC-HTE50EB_VQT4E88.book 21 ページ ２０１２年２月２４日 金曜日 午後７時５４分 Indicator illumination The indicators display the condition of this system by flashing. The indicator patterns illustrated below are displayed during normal operational conditions. They do not refer to the indications of a problem. Refer to “Troubleshooting” (> 19) if the indicators do not light as illustrated below. Indicator Description The indicators blink from left to right (i) or from right to left (s).
SC-HTE50EB_VQT4E88.book 22 ページ ２０１２年２月２４日 金曜日 午後７時５４分 Specifications AMPLIFIER SECTION RMS output power 10 % total harmonic distortion Subwoofer ch 110 W per channel (100 Hz, 3 ≠) Front ch (L, R ch) 65 W per channel (1 kHz, 6 ≠) Total RMS Dolby Digital mode power 240 W TERMINAL SECTION HDMI This unit supports “HDAVI Control 5” function.
SC-HTE50EB_VQT4E88.book 23 ページ ２０１２年２月２４日 金曜日 午後７時５４分 Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste.
SC-HTE50EB_VQT4E88.book 24 ページ ２０１２年２月２４日 金曜日 午後７時５４分 Sales and Support Information Customer Communications Centre ≥ For customers within the UK: 0844 844 3899 ≥ For customers within Ireland: 01 289 8333 ≥ For further support on your product, please visit our website: www.panasonic.co.uk Direct Sales at Panasonic UK ≥ Order accessory and consumable items for your product with ease and confidence by phoning our Customer Communications Centre Monday–Thursday 9:00 a.m.–5:30 p.m., Friday 9:30 a.m.–5:30 p.m.
