Operating Instructions Home Theater Audio System Model No. SC-HTB150 Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Please keep this manual for future reference. Included Installation Instructions Installation work should be completed by a qualified installation specialist. ( 4 to 6) Before commencing work, carefully read these installation instructions and the operating instructions to ensure that installation is performed correctly.
Contents Safety precautions .......................................................................................................... 2 Features .......................................................................................................................... 4 Placement ....................................................................................................................... 4 Wall-mounting ...............................................................................................
CAUTION Unit To reduce the risk of fire, electric shock or product damage, – Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure this unit is well ventilated. – Do not obstruct this unit's ventilation openings with newspapers, tablecloths, curtains, and similar items. – Do not place sources of naked flames, such as lighted candles, on this unit. This unit is intended for use in moderate climates.
Features Thanks for your purchase of our product. Please read through this manual before making connections and operating this product. Retain this manual for future reference. LINE input Optical input HDMI ARC function Bluetooth play back Package Contents AC Cable Main unit (SC-HTB150) Subwoofer (SC-HTB150S) Remote control AC adaptor Wall plug (2x) and screw (2x) Placement Placing the main unit in a rack, on a table or on the wall.
2 Place the main unit in the desired position and attach each cord onto the rack or table. Screw eye Make sure that the slack of the cord is minimal. Do not lean the main unit against the TV or wall. Attach the screw eye at a position capable of supporting over 30 kg. Depending on the placement of the main unit, the screwing position of the screw eye may differ.
1. Drill the two holes (about 6mm diameter) in the wall keeping 680 mm distance between the drill holes, as shown in the picture on the right. Insert the two plugs supplied into the drilled holes and then insert two screws (supplied) into the holes and tighten. As shown in the picture on the right (diagram1). Diagram 1 2. Take care to leave 4 mm between the screw heads and the wall. As shown in the picture on the right (diagram 2). Diagram 2 3. Hang the assembled sound bar on the screw set in the wall.
SIDE PANEL: ❶ STANDBY: Switch the unit between ON and STANDBY mode. ❷ SOURCE: Switch to the different source mode among in, BLUETOOTH, LINE IN, OPTICAL IN and ARC mode. ❸ VOLUME-: Press to decrease the volume level. ❹ VOLUME+: Press to increase the volume level. REAR PANEL: ❶ ARC SLOT: HDMI TV (ARC) terminal (ARC compatible). ❷ LINE IN: Connect to a 3.5mm headphone socket of the external audio device. ❸ OPTICAL DIGITAL AUDIO INPUT: Connect to an optical output socket of the external audio device.
ARC (AUDIO RETURN CHANNEL) ARC is audio return channel function, used in digital audio output of liquid-crystal display televisions in order to get the optimal synchronous sound quality. Use the HDMI cable to connect the HDMI-ARC input port of this sound bar to the ARC output port of the liquid-crystal display television. Press [ ] button to switch to HDMI ARC mode on the remote control and the indicator will show as solid purple on the sound bar.
Connecting a paired device If this sound bar is already connected to a Bluetooth device, press and hold button on the remote control to disconnect it, the indicator will blink blue quickly, activate your device's Bluetooth function to search for the Bluetooth signal, select SC-HTB150 on the device list and tap it, when your device and sound bar is connected the indicator on the sound bar will show a solid blue light.
Remote control Remote Control Operation Insert the battery into the remote control. Point the remote control at the remote sensor on the front panel. The remote control works within a distance of about 8 metres from the sensor and within an angle of about 30 degrees from the left and right side. Battery Installation ❶ Remove the battery compartment cover on the back of the remote control. ❷ Load one AAA/1.
Note: Remove the battery when you do not intend to use the remote control for a long time. Weak batteries can leak and severely damage the remote control. The battery must not be exposed to excessive heat, such as sunshine, fire or other similar heat sources. Be environmentally friendly and dispose of batteries according to your government regulations. Avoid use in the following conditions High or low extreme temperatures during use, storage or transportation.
Basic Playback Operation Press to switch on the unit. Press it again to put the unit in standby mode. The unit is in the standby condition (the [ ] indicator lights) when the AC mains lead is connected. The primary circuit is always "live" as long as the AC adaptor is connected to an electrical outlet. Press to enter the BT (Bluetooth) mode. Hold down this button for 3 seconds to disconnect Bluetooth. Press repeatedly to switch between BLUETOOTH, LINE IN, OPTICAL and HDMI ARC mode.
Troubleshooting Before resorting to maintenance service, please kindly check the following chart. Symptom Cause(s) Remedy No Power The AC power cord of the adaptor is not Please check that the AC power cord of the connected to the main unit or it's not adaptor is connected securely. connected to the power supply. Sound There is no sound or the sound is distorted. The audio cables aren't connected securely. The volume is set to the minimum level. The sound is switched off.
Specifications Power Supply Soundbar AC ~100-240V,50/60Hz, DC18V/2A Subwoofer AC ~100-240V, 50/60Hz Soundbar Power Consumption (normal use) Subwoofer Soundbar Power Consumption in standby mode Subwoofer Soundbar Dimensions Subwoofer (W x H x D) Carton Box (individual) Soundbar Net Weight Subwoofer Temperature Working Environment Relative Humidity Total RMS Stereo Mode Power Output (RMS) Soundbar 30% THD Subwoofer Frequency response Bluetooth version Bluetooth frequency band Bluetooth maximum power HDMI
References Panasonic bears no responsibility for data and/or information that is compromised during a wireless transmission. Frequency band This system uses the 2.4 GHz frequency band. Certification This system conforms to the frequency restrictions and has received certification based on frequency laws. Thus, a wireless permit is not necessary. The actions below are punishable by law in some countries: – Taking apart or modifying the unit. – Removing specification indications.
Product conformity information for customers in the EU English Declaration of Conformity (DoC) Hereby, "Panasonic Marketing Europe GmbH" declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Customers can download a copy of the original DoC to our RE products from our DoC Server: http://www.ptc.panasonic.
Slovensko Izjava o skladnosti (DoC) "Panasonic Marketing Europe GmbH" v tem dokumentu izjavlja, da je izdelek v skladu z bistvenimi zahtevami in drugimi pomembnimi določbami Direktive 2014/53/EU. Stranka lahko naloži izvod izvirnega DoC o naših izdelkih RE s strežnika DoC: http://www.ptc.panasonic.
