SCHTB10EGGNGS_RQTX1160-B.book Page 1 Thursday, June 10, 2010 3:14 PM Operating Instructions Home Theater Audio System Model No. SC-HTB10 Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Before connecting, operating or adjusting this product, please read the instructions completely. Please keep this manual for future reference. The illustrations shown may differ from your unit.
SCHTB10EGGNGS_RQTX1160-B.book Page 2 Monday, May 10, 2010 1:59 PM WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, ≥ DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. ≥ USE ONLY THE RECOMMENDED ACCESSORIES. ≥ DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
SCHTB10EGGNGS_RQTX1160-B.book Page 3 Monday, May 10, 2010 1:59 PM Safety precautions Set the unit up on an even surface away from direct sunlight, high temperatures, high humidity, and excessive vibration. These conditions can damage the cabinet and other components, thereby shortening the unit’s service life. Do not place heavy items on the unit. Voltage Do not use high voltage power sources. This can overload the unit and cause a fire. Do not use a DC power source.
SCHTB10EGGNGS_RQTX1160-B.book Page 4 Monday, May 10, 2010 1:59 PM TABLE OF CONTENTS Operating Instructions Safety precautions ................................................................................................ 3 Licenses ................................................................................................................. 3 Accessories ........................................................................................................... 5 Unit care ..........................
SCHTB10EGGNGS_RQTX1160-B.book Page 5 Thursday, June 10, 2010 3:17 PM ≥ These operation instructions are applicable to model SC-HTB10 for variety of regions. ≥ Unless otherwise indicated, illustrations in these operating instructions are of the model for Continental Europe, Australia and New Zealand. ≥ Operations in these instructions are described mainly with the remote control, but you can perform the operations on this unit if the controls are the same.
SCHTB10EGGNGS_RQTX1160-B.book Page 6 Thursday, June 10, 2010 3:17 PM Control reference guide This unit (Front) 1 1 2 3 4 2 3 4 Standby/on switch (Í/I) Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power.
SCHTB10EGGNGS_RQTX1160-B.book Page 7 Monday, May 10, 2010 1:59 PM Remote control Remove the insulation sheet A before using.
SCHTB10EGGNGS_RQTX1160-B.book Page 8 Monday, May 10, 2010 1:59 PM Placement Caution ≥ This unit and the supplied wall mount brackets are to be used only as indicated in these operating instructions or the installation instructions. Failure to do so may lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified service person if damage has occurred or if you experience a sudden change in performance.
SCHTB10EGGNGS_RQTX1160-B.book Page 9 Monday, May 10, 2010 1:59 PM Assembling the unit Refer to the following when placing this unit on a table or in a rack. For wall mount, refer to the installation instructions. (> 20) Professional installation is required. The installation should never be done by any other than a qualified installation specialist. Preparation ≥To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
SCHTB10EGGNGS_RQTX1160-B.book Page 10 Monday, May 10, 2010 1:59 PM Connections Turn off all equipment before connection and read the appropriate operating instructions. Do not connect the AC mains lead until all other connections are complete. Compatible with FULL HD 3D TV and Blu-ray Player ≥ This unit can pass through the 3D signal from a 3D compatible Blu-ray Player to a FULL HD 3D TV.
SCHTB10EGGNGS_RQTX1160-B.book Page 11 Thursday, June 10, 2010 3:18 PM Connection from an HDMI compatible device You can output the audio signal from the connected HDMI compatible Blu-ray player, DVD player, etc. with this unit and pass the signal through to your TV. Preparation ≥Connect this unit to the TV. (> 10) E.g., Blu-ray Disc Player AV OUT HDMI AV IN ≥ Refer to the operating instructions of the connected HDMI compatible device for the necessary setting, to output the video and audio signals.
SCHTB10EGGNGS_RQTX1160-B.book Page 12 Monday, May 10, 2010 1:59 PM Using this unit Preparation ≥ Turn on the TV. ≥ If VIERA Link is activated on both the connected TV and this unit, make sure to change the TV’s settings for this unit. (> 14, “Linked operations with the TV (VIERA Link “HDAVI ControlTM”)”) ≥ If VIERA Link is not activated or if the TV is not compatible with VIERA Link, reduce the volume of the TV to its minimum.
SCHTB10EGGNGS_RQTX1160-B.book Page 13 Monday, May 10, 2010 1:59 PM Audio effects B C A The various audio effects Clear-mode Dialog You can make the dialogue stand out from the background noise and also hear sound as if it is coming from the centre of the TV. Sound Effect C Changing the audio effects 1 Press the button for the respective effect on the remote control.
SCHTB10EGGNGS_RQTX1160-B.book Page 14 Monday, May 10, 2010 1:59 PM Linked operations with the TV (VIERA Link “HDAVI ControlTM”) What is VIERA Link “HDAVI Control”? VIERA Link “HDAVI Control” is a convenient function that offers linked operations of this unit, and a Panasonic TV (VIERA) under “HDAVI Control”. You can use this function by connecting the equipment with an HDMI cable. See the operating instructions for connected equipment for operational details. Preparation 1 Set “VIERA Link” to “On”.
SCHTB10EGGNGS_RQTX1160-B.book Page 15 Monday, May 10, 2010 1:59 PM Specifications SPEAKER SECTION Power consumption: 30 W Power consumption in standby mode: Approx. 0.2 W Power supply: (Continental Europe, Australia and New Zealand) AC 220 V to 240 V, 50 Hz (Others) AC 110 V to 127 V/220 V to 240 V, 50/60 Hz Dimensions (WkHkD): (Without wall mount bracket) 800 mmk108 mmk58 mm (With wall mount bracket) 800 mmk108 mmk80 mm Mass: (Without wall mount bracket) Approx. 3.
SCHTB10EGGNGS_RQTX1160-B.book Page 16 Thursday, June 10, 2010 3:18 PM Troubleshooting Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the following guide do not solve the problem, consult your dealer for instructions. General operation To return to the factory preset. ≥ While this unit is on, press [Í/I] on this unit for more than 4 sec. (All the indicators will blink twice when the unit is reset.
Page 17 Thursday, June 10, 2010 If this unit is connected to a non-Panasonic ARC compatible TV, connect using an optical digital audio cable. (> 10) ≥ After connecting the optical digital audio cable, the setting of this unit must be changed to specify the audio input terminal. (> right, “TV Audio”) Audio is output from the TV speakers and not this unit’s. ≥ When connected to a VIERA Link (HDAVI Control) compatible TV, change the audio output settings to this unit.
SCHTB10EGGNGS_RQTX1160-B.book Page 18 Monday, May 10, 2010 1:59 PM Using the IR Blaster With the IR Blaster connection, it is possible to send the IR signal received by this unit’s remote control signal sensor to the TV’s sensor. Use the TV’s remote control within this unit’s remote control signal sensor’s operation range. ≥For the operation range, refer to page 6. 1 Connect the jack plug to this unit’s Ir SYSTEM terminal.
SCHTB10EGGNGS_RQTX1160-B.book Page 19 Monday, May 10, 2010 1:59 PM Caution for AC Mains Lead For your safety, please read the following text carefully. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5-ampere fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark Ï or the BSI mark Ì on the body of the fuse.
SCHTB10EGGNGS_RQTX1160-B.book Page 20 Monday, May 10, 2010 1:59 PM Installation Instructions Home Theater Audio System Model No. SC-HTB10 Getting started Safety Precautions WARNING Ensure that the installation location is strong enough to support long-term use. ≥If its strength becomes insufficient over the course of long-term use, the unit may drop, possibly causing injury. The installation work should never be done by any other than a qualified installation specialist.
SCHTB10EGGNGS_RQTX1160-B.book Page 21 Monday, May 10, 2010 1:59 PM WARNING: PROFESSIONAL INSTALLATION IS REQUIRED. PANASONIC DISCLAIMS ANY PROPERTY DAMAGE AND/OR SERIOUS INJURY, INCLUDING DEATH RESULTING FROM IMPROPER INSTALLATION OR INCORRECT HANDLING. Requests regarding handling: 1 Exercise care when selecting the location for the unit because it may discolour or deform due to light or heat if it is placed where it is exposed to direct sunlight, or near a heater.
SCHTB10EGGNGS_RQTX1160-B.book Page 22 Thursday, June 10, 2010 3:19 PM Components The images shown in this installation instructions are for illustrative purpose only. Check the supplied components before starting.
SCHTB10EGGNGS_RQTX1160-B.book Page 23 Monday, May 10, 2010 1:59 PM Connections 3 Complete all the necessary connections to this unit. (> 10) ≥ Connect the AC mains lead to this unit, but do not connect it to the household mains socket until the installation is completed. ≥ For details, refer to the operating instructions for this unit. Placement 4 Use the measurements indicated below to identify the screwing positions on the wall. A 36 mm B 72 mm C 108.
SCHTB10EGGNGS_RQTX1160-B.book Page 24 Monday, May 10, 2010 1:59 PM Attaching this unit to a wall 6 Thread a cord (not supplied) through the wall mount bracket. ≥ Use a cord which is capable of supporting over 20 kg. 7 A Rear of this unit B Fall prevention cord (not supplied) Attach the lock pins into the wall mount bracket. ≥ The lock pins are designed to lock the wall mount brackets to the screws that this unit is attached to. Hence, preventing this unit from falling off the screws.
SCHTB10EGGNGS_RQTX1160-B.book 9 Page 25 Monday, May 10, 2010 1:59 PM Mount the unit securely onto the screws. A Move this unit so that the screw is in this position. ≥ Be sure that both the wall mount brackets are securely attached to the screws. ≥ If this unit is tilting forward, remove this unit from the screws and adjust by tightening the screws. 10 Push the lock pins fully into place.
SCHTB10EGGNGS_RQTX1160-B.
Page 27 Monday, May 10, 2010 SUOMI 1:59 PM NORSK VAROITUS: ADVARSEL: VÄHENNÄ TULIPALON, SÄHKÖISKUN TAI LAITTEISTON VAHINGOITTUMISEN VAARAA ≥ TÄTÄ LAITETTA EI SAA ALTISTAA SATEELLE, KOSTEUDELLE, ROISKEILLE TAI TIPPUVILLE NESTEILLE. LAITTEEN PÄÄLLE EI SAA MYÖSKÄÄN ASETTAA MITÄÄN NESTEELLÄ TÄYTETTYÄ ESINETTÄ, KUTEN MALJAKKOA. ≥ KÄYTÄ VAIN SUOSITELTUJA LISÄVARUSTEITA. ≥ ÄLÄ IRROTA KANTTA (TAI TAUSTAA). SISÄLLÄ EI OLE KÄYTTÄJÄN HUOLLETTAVISSA OLEVIA OSIA.
SCHTB10EGGNGS_RQTX1160-B.book Page 28 Thursday, June 10, 2010 3:20 PM Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste.
