Operating instructions

37
Advanced operations
VQT4R78
Volume (Channel balance)
∫ Adjusting speaker level
(Effective when playing multi-channel audio)
1 Select “Test” and press [OK].
A test signal is output.
2 While listening to the test signal
Press [3, 4] to adjust the volume of
subwoofer ( ).
The volume can be adjusted between r6 dB
to s6 dB.
3 Press [OK].
The test signal stops.
To finish the speaker setting
Press [3, 4, 2, 1] to select “Complete” and
press [OK].
Changing the sound
settings
For more details on each setting, refer to “Sound
Settings” on the Option menu. (> 30)
1 Press [SURROUND].
2 While the mode is displayed
Press [3, 4] to select the desired setting.
(> 30)
∫ Adjusting speaker level during
play
1 Press [CH SELECT] to activate the speaker
setting mode.
2 Press [CH SELECT] several times to select
the speaker.
≥ Press [2, 1] to adjust the balance of the
front speakers.
3 Press [3] (increase) or [4] (decrease) to
adjust the speaker level of the subwoofer.
s6 dB to r6 dB
1 Press [SOUND].
2 Press [3, 4] to select “2CH SOURCE” or
“ALL SOURCE”, and then press [OK].
e.g.,
3 While the mode is displayed
Press [3, 4] to select the desired setting and
press [OK].
Repeat this procedure if necessary. (> 30)

≥ The sound effects/modes may not be available or have no
effect with some sources.
≥ You may experience a reduction in sound quality when
these sound effects/modes are used with some sources. If
this occurs, turn the sound effects/modes off.
Speaker settings
Complete
Tes t
RL
0
dB
SW
dB
0
Surround Effects
Sound Effects
SC-BTT100EB-VQT4R78_mst.book 37 ページ ２０１２年１２月２１日 金曜日 午前９時３７分