Operating Instructions

20
VQT2Q52

Ìðåæîâè íàñòðîéêè
OK
RETURN
Network Easy Setting (Connection Test)
Wired
Wireless
Select a connection mode.
Current setting : Wired
LAN cable connection:
Connect a LAN cable to the unit and select “Wired”.
Wireless LAN connection:
Connect the Wireless LAN Adaptor (DY-WL10) to the USB
port and select “Wireless”.
Access Point Connection Setting
Select a connection method for access to
Wireless LAN.
Please refer to the operating instructions of
the access point about connection methods.
WPS (PUSH button)
Search for access point
Access Point Connection Setting
Reception
Select an access point to connect with.
To search for access point again, please
select "Search again" below.
SSID
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
Search again
SSID
Wireless type
Authentication type
Encryption type
:XXXXXXXXXXXXXXX
:802.11n/g/b (2.4GHz)
:WPA-PSK
:AES
Access Point Connection Setting
WPA2-PSK (AES/TKIP)
WPA-PSK (AES/TKIP)
Open/Shared Key (WEP)
Open system
Select authentication type.
OK
Access Point Connection Setting
Yes No
Failed to connect to the access point.
A conflict with other devices occurred.
Do you wish to setup Access Point
Connection Setting again ?
Èçáåðåòå “Wired” èëè “Wireless” è íàòèñíåòå [OK].
w “Wired” (Âðúçêà ñ êàáåë)
Íàïðàâåòå íàñòðîéêèòå, ñëåäâàéêè èíñòðóêöèèòå íà åêðàíà.
p Ïðè âúçíèêâàíå íà ïðîáëåìè (> îòäÿñíî)
w “Wireless” (Áåçæè÷íà âðúçêà)
Àêî èçáåðåòå “Wireless” è ñå èçïèøå “Wireless LAN Adaptor
is not connected.”, ïðîâåðåòå äàëè Wireless LAN àäàïòî-
ðúò å âêëþ÷åí ïðàâèëíî. Èëè ãî èçêëþ÷åòå è âêëþ÷åòå
îòíîâî. Àêî ñúîáùåíèåòî îñòàíå íà äèñïëåÿ, ñå êîíñóë-
òèðàéòå ñ äèëúðà ñè.
Èçáåðåòå “WPS (PUSH button)” èëè “Search
for access point” è íàïðàâåòå íàñòðîéêèòå,
êàòî ñëåäâàòå èíñòðóêöèèòå íà åêðàíà.
*
1
íàïð.
WPS (PUSH button):
Àêî Wireless ðóòåðúò (Access point)
ïîääúðæà WPS (PUSH button), ìîæåòå
ëåñíî äà íàïðàâèòå íàñòðîéêèòå, êàòî
íàòèñíåòå WPS áóòîíà íà íåãî.
WPS (Wi-Fi Protected Setup) å ñòàíäàðò,
êîéòî óëåñíÿâà íàñòðîéêèòå çà âðúçêà
è ñèãóðíîñò íà áåçæè÷íè LAN óñòðîéñòâà.
 Íàòèñíåòå WPS áóòîíà èëè ñúîòâåòíèÿ áóòîí íà
Wireless ðóòåðà (Access point), äîêàòî èíäèêàòîðúò
Âèæòå èíñòðóêöèÿòà çà óïîòðåáà íà ðóòåðà.
Íàòèñíåòå [OK].
çàïî÷íå äà ìèãà.
p

Òúðñåíå íà òî÷êà çà äîñòúï (Access point)
Äîñòúïíèòå
Wireless ðóòåðè (Access point
) ñå îòêðèâàò è
èçïèñâàò. Ìîæåòå äà èçáåðåòå åäèí îò èçïèñàíèòå.
 Ñ [, ] èçáåðåòå SSID èëè Wireles
s ðóòåðà (Access
point), ñ êîéòî èñêàòå äà ñå ñâúðæåòå. Íàòèñíåòå
[OPTION], çà äà âèäèòå èíôîðìàöèÿ çà ðóòåðà, êàòî
îáúðíåòå âíèìàíèå íà òèïà îòîðèçàöèÿ è êîäèðàíå.
*
2
p Àêî íå íàìåðèòå SSID , èçáåðåòå “Search again”.
 Íàòèñíåòå [RETURN] è íàòèñíåòå [OK].
Ñëåä òîâà èçáåðåòå ïîçèöèÿòà, îòãîâàðÿùà
íà òèïà îòîðèçàöèÿ, êîéòî ñòå âèäÿëè â ñòúïêà
 îòëÿâî.
*
2
p  “Encryption Key” âúâåäåòå êîäà çà êîäèðàíå,
ïðåäîñòàâåí ñ âàøèÿ Wireless ðóòåð (Access point).
Íàñòðîéòå, êàòî ñëåäâàòå èíñòðóêöèèòå íà åêðàíà.
*1
*2
Wi-Fi Protected Setup-ñúâìåñòèì Wireless ðóòåð (Access point)
ìîæå äà èìà îçíà÷åíèå.
SSID (Service Set IDentification) å íàèìåíîâàíèå, èçïîëçâàíî îò
Wireless LAN çà îçíà÷àâàíå íà ÷àñòíè ìðåæè. Âðúçêàòà å âúç-
ìîæíà, ñàìî àêî óñòðîéñòâàòà è îò äâåòå ñòðàíè ñà SSID.
Ïðè âúçíèêâàíå íà
ïðîáëåìè ñ íàñòðîéêèòå
Íàñòðîéâàíå íà òî÷êà çà äîñòúï (Access Point)
A conflict with another
device occurred.
A time out error
occurred.
An authentication error
or a time out error
occurred.
A device error
occurred.
p Ñâúðçâàíåòî íà Wireless LAN
àäàïòîðà
Àêî íÿìà ïîäîáðåíèå,
îáúðíåòå ñå êúì äèëúðà ñè.
p Ìîëÿ, èç÷àêàéòå èçâåñòíî
âðåìå è îïèòàéòå îòíîâî.
p Íàñòðîéêèòå íà W
ireless
ðóòåðà (Access point) çà
MAC Address è äð.
p Ñèãíàëúò ìîæå äà å ñëàá. Ñ
óäúëæèòåëåí USB êàáåë ïðî-
ìåíåòå ïîëîæåíèåòî íà Wire-
less LAN àäàïòîðà.
p SSID è êîäúò çà êîäèðàíå
íà Wireless ðóòåðà (Access
point).
p Ìîëÿ, èç÷àêàéòå èçâåñòíî
âðåìå è îïèòàéòå îòíîâî.
Ïðîâåðåòå ñëåäíîòîÑúîáùåíèå