Operating instructions

24
VQT2Z56
Enjoying sound effects
from all speakers
Press [SURROUND] several times to select the
effect.
7.1CH VIRTUAL SURROUND
You can enjoy 5.1/6.1/7.1-channel surround-like effect
using 2.1-channel speakers.
2CH STEREO
You can play any source in stereo without the surround
sound effect.
DOLBY VIRTUAL SPEAKER REFERENCE
You can enjoy a surround sound effect similar to 5.1 ch
(Dolby Digital or DTS) with any audio source, using the
included front speakers and the active subwoofer. You can
also enjoy a surround sound effect with stereo source such
as CDs.
DOLBY VIRTUAL SPEAKER WIDE
This mode widens the acoustic field of the front speakers.
∫ Adjusting speaker level during play
1 Press and hold [jCH SELECT] to activate the speaker
setting mode.
2 Press [jCH SELECT] several times to select the speaker.
Each time you press the button:
L R: Front speaker
(left and right: only the balance is adjustable.)
≥ Press [2, 1] to adjust the balance of the front
speakers.
SW: Active subwoofer
≥ Press [3] (increase) or [4] (decrease) to adjust the
speaker level of the active subwoofer.
s6 dB to r6 dB
∫ Changing the sound modes
1 Press [SOUND] several times to select the mode.
≥ The selected mode will only be displayed on the main
unit.
2 While the selected mode is displayed
Press [2, 1] and select the desired setting.
EQUALIZER
You can select sound quality settings.
FLAT
Cancel (no effect is added).
HEAVY
Adds punch to rock.
CLEAR
Clarifies higher sounds.
SOFT
For background music.
SUBWOOFER LEVEL
You can adjust the amount of bass.
1 (Weakest effect) to 4 (Strongest effect)
≥The setting you make is retained, and recalled every
time you play the same type of source.
H.BASS
You can enhance low-frequency sound so that heavy
bass sound can be heard clearly, even if the acoustics of
your room are not optimal.
≥The setting you make is retained, and recalled every
time you play the same type of source.
WHISPER-MODE SURROUND
You can enhance the surround effect for low volume
sound. (Convenient for late night viewing.)
CLEAR-MODE DIALOG
You can make the dialogue stand out from the
background noise and also hear sound as if it is coming
from the centre of the TV.
DUAL (“D-IN”, “ARC” only)
You can select to suit the type of audio on the main unit.
M1
M2
M1rM2 (stereo audio)
(Only works with Dolby Dual Mono)
≥“M1” or “M2” is not available if “On” is selected in
“Digital Audio Input”. (> 39)
AUTO STEREO (“FM” only)
If noise is excessive, you can select the type of FM radio
audio. Depending on the broadcast system, stereo or
monaural will be selected.
MONO
The sound becomes monaural.

≥ The sound effects/modes may not be available or have no effect with some
sources.
≥ You may experience a reduction in sound quality when these sound
effects/modes are used with some sources. If this occurs, turn the sound
effects/modes off.
Enjoying surround sound
effects
L R SW
SCBFT800_VQT2Z56_eng.book 24 ページ ２０１０年８月４日 水曜日 午後５時１０分