Operating Instructions

Wi-Fi
®
connection guide
Checking accessories
∏ 1 AC mains lead
∏ 1 Screw
∏ 1 Safety holder
∏ 2 Wall mount brackets
Turning the unit on
The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.
The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.
“Wi-Fi”, “Wi-Fi Protected Setup”, “WPA” and “WPA2” are marks or registered
marks of the Wi-Fi Alliance.
Google Play and Android are trademarks of Google Inc.
App Store is a service mark of Apple Inc.
All other trademarks are trademarks of their respective owners.
Setting up the
wireless network
≥ The following steps are based on a
smartphone.
≥ Do not connect a LAN cable.
≥ You can also connect this unit to
the network using a WPS
supported router or a LAN cable.
For details, refer to “Owner’s
Manual <Full version>”.
Enjoying music
Download the app “Panasonic Music Streaming” (free of charge), etc.
[iOS] : App Store
[Android] : Google Play
TM
≥ More apps are available. For details, visit
www.panasonic.com/global/consumer/homeav/allseries/service
(This site is in English only.)
1
Touch
Wi-Fi
Input the required details on the settings page.
Lights in blue.
Go to Wi-Fi settings.
≥ Proceed to the next step after the network
indicator changes from blinking in blue and
red to blinking in blue.
Select “AllPlay XXXXXX_AJ”
to connect to this unit.
[iOS] : The settings page will be
automatically displayed in the
Internet browser.
[Android] : Once you open the
Internet browser, the settings page
will be displayed.
Settings Wi-Fi settings
Turn the network standby on.
≥ The unit will turn on automatically from
standby mode when selected as the
output speakers.
≥ The power consumption in standby
mode will increase.
Touch and hold both [-WPS] and
[VOL +] until the mode indicator
(amber) blinks once.
SC-ALL8&3_EBEG_mst_SQT0189.fm 2 ページ ２０１４年４月９日 水曜日 午後１２時５９分