Operating instructions

10
RQT8043
RQTV0279
ESPAÑOLESPAÑOLESPAÑOLESPAÑOLESPAÑOL
Changing a single disc (SINGLE CHANGE)
By main unit only
While one disc is playing, you can change the discs in other trays.
1 Press [0 , SINGLE CHANGE].
2 Press [3, 1] ~ [3, 5] to select the desired tray.
3 Change the disc.
4 Press [0 , SINGLE CHANGE] again to close the tray.
Checking the track information
You can select a desired disc display mode.
Press [DISPLAY, –DIMMER] during play or pause.
Elapsed play time Remaining play time
Elapsed
play time
Remaining
play time
Album
Name
Tag
(Artist)
Tag
(Track)
Tag
(Album)
Track
Name
Note:
• When a title is longer than 8 characters, it will scroll across the
display. The scrolling will start after every 3 seconds.
• “NO TAG” is displayed if titles with tags have not been entered.
• Maximum number of displayable characters: approximately 32
• This unit can display album, track and artist name with MP3 ID3
tags (version 1.0 and 1.1).
• Titles containing text data that the unit does not support cannot
be displayed.
• ID3 is a tag embedded in MP3 track to provide information about
the track.
• Titles entered with 2-byte code cannot be displayed correctly on
this unit.
Advanced playAdvanced play
Program play
This function allows you to program up to 24 tracks.
1 Press [6 , CD] and then [7, CLEAR].
2 Press [PROGRAM].
“PGM” appears.
3 Press [DISC] and then [1] ~ [5] to select the disc.
4 Press the numeric buttons to select your desired track.
Repeat steps 3 to 4 to program other tracks.
5 Press [6 , CD] to start play.
1 Press [DISC] and then [1] ~ [5] to select the disc.
2 Press [7, CLEAR].
3 Press [PROGRAM].
4 Press [ALBUM ( or )] to select your desired album.
To select an album directly, press the numeric buttons
after pressing [ALBUM (
or )].
5 Press [4, 4 / REW] or [¢ , 3 / FF] to select the track.
To select a track directly, press the numeric buttons after
pressing [4,
4 / REW] or [¢ , 3 / FF] .
6 Press [ENTER].
Repeat steps 4 to 6 to program other tracks.
7 Press [6, CD] to start play.
For two-digit track, press [ h 10] once then the two digits.
For three-digit track, press [
h 10] twice then the three digits.
To Action
Cancel
program mode
Press [PROGRAM] in the stop mode.
Replay the
program
Press [PROGRAM] then [6, CD] in the stop
mode.
Add to the
program
Repeat steps 3 to 4 in the stop mode.
Repeat steps 4 to 6 in the stop mode.
Check
program
contents
Press [4,
4 / REW] or [¢, 3 / FF] when
“PGM” is displayed in the stop mode.
The track number, program order and disc
number are displayed:
Program
order
Track
number
The program order is displayed followed by the
album number and track number.
Clear the last
track
Press [DEL] in the stop mode.
Clear all
programmed
tracks
Press [7, CLEAR] in the stop mode. “CLR ALL”
is displayed. Within 5 seconds, press the
button again to clear all tracks.
Note:
• You cannot program CD-DA together with MP3 tracks.
• The program memory is cleared when you change a disc or open
the disc tray.
• You cannot program more than one disc.
Discs (continued)
RQTV0279-2B.indd 10RQTV0279-2B.indd 10 4/3/08 10:55:04 AM4/3/08 10:55:04 AM