CD Stereo System Operating Instructions The illustrations show SC-AK310. Model No. SC-AK310 SC-AK110 For U.S.A. only As an E NERGY S TAR ® Partner, Panasonic has determined that this product meets the E NERGY S TAR ® guidelines for energy efficiency. Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference.
Table of contents Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. These operating instructions are applicable to the following systems. Before using These operating instructions, however, fundamentally explain the operation of system SC-AK310. System SC-AK310 Main unit SA-AK310 SA-AK110 Speakers SB-AK310 SB-AK110 SC-AK110 CAUTION! THIS PRODUCT UTILIZES A LASER.
The model number and serial number of this product can be found on either the back or the bottom of the unit. Please note them in the space provided below and keep for future reference. MODEL NUMBER User memo: DATE OF PURCHASE DEALER NAME DEALER ADDRESS SERIAL NUMBER Before using TELEPHONE NUMBER IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below.
Supplied accessories The remote control Please check and identify the supplied accessories. Use numbers indicated in parentheses when asking for replacement parts. Batteries (Only for U.S.A.) To order accessories contact 1-800-332-5368 or web site (http://www.panasonic.com). R6, AA, UM-3 AC power supply cord ..... 1 pc. (RJA0065-A) FM indoor antenna .......... 1 pc. (RSA0006-L) AM loop antenna ..... 1 pc. (N1DADYY00002) • • Insert so the poles (+ and –) match those in the remote control.
Set-up Connect the AC power supply cord only after all other connections have been made. Preparation Before using Twist and pull off the vinyl tip of the antenna wires and speaker cords. 2 AM loop antenna Stand the antenna up on its base. 1 FM indoor antenna Adhesive tape Affix where reception is best. 4 AC power supply cord Note The included AC power supply cord is for use with this unit only. Do not use it with other equipment.
Front panel controls Main unit 1 AC supply indicator (AC IN) This indicator lights when the unit is connected to the AC power supply. 2 Standby/on switch (f f/I, POWER) Before using Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. 3 4 5 6 7 8 9 0 ! @ Display Remote control signal sensor ................................... 4 Super sound EQ button (SUPER SOUND EQ) ........ 10 Preset EQ select button (PRESET EQ) .........
The radio: manual tuning The radio: preset tuning Remote control only There are two methods of pre-setting stations. Automatic presetting : All the stations the tuner can receive are preset. Manual presetting : You can select the stations to preset and the order they are preset in. Up to 15 stations each can be set in the FM and AM bands. PL PLAY REC SLEEP CLOCK AUTO UTO OFF TIMER DISC 1 3 1 2 3 4 5 6 8 9 0 10 PROGRAM 3 S.
CDs CD selection 1•2 3 Choose CDs with this mark: PL PLAY REC SLEEP CLOCK AUTO UTO OFF TIMER DISC 2 3 4 5 6 7 8 9 1 PROGRAM S.SOUND EQ PRESET EQ 0 10 CD Do not: • • • BAND AUX CLEAR FF CD DISP DIMMER PLAY MODE XXXX XXXX XXXXX XXXX XX XXXX XXXX XXXXX XXXX XXXX XXXXX XXXX XXXX 1 Press [c, OPEN/CLOSE] to open the tray. The unit comes on. 2 Set a CD in the tray. (Label must face upward.
PL PLAY REC SLEEP CLOCK AUTO UTO OFF TIMER PL PLAY REC SLEEP CLOCK AUTO UTO OFF TIMER DISC DISC 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 8 9 0 10 PROGRAM PROGRAM S.SOUND EQ S.
Cassettes Enhancing the sound quality PL PLAY REC SLEEP CLOCK AUTO UTO OFF TIMER DISC 2 3 4 5 6 7 8 9 0 10 1 PROGRAM PL PLAY REC SLEEP CLOCK AUTO UTO OFF TIMER S.SOUND EQ PRESET EQ DISC 2 3 4 5 6 7 8 9 1 CD PROGRAM TUNER TAPE BAND AUX SUPER SOUND EQ VOL VOL MUTING REW CLEAR FF CD DISP DIMMER PLAY MODE S.SOUND EQ S.SOUND EQ PRESET EQ 0 10 CD TUNER TAPE BAND AUX VOL VOL MUTING REW You can use either deck 1 or deck 2 for tape playback.
Recording Optional antenna connections To stop recording Press [L, STOP]. AM outdoor antenna AM outdoor antenna (not included) If the tape finishes before the CD The CD continues playing. Press [L, STOP] to stop it. 5 -12 m (16 – 40 ft.) To record on the other side of the tape Turn the tape over and press [a REC]. Remote control only Hold down [PLAY MODE] while recording. Every time you hold down the button: BP1 ↔ BP2 Choose the setting with the least noise.
Turning the demo function off Auto-off function Remote control only PL PLAY REC SLEEP CLOCK AUTO UTO OFF TIMER SLEEP –AUTO OFF DISC 1 2 3 4 5 6 8 9 0 10 PROGRAM S.SOUND EQ 7 PRESET EQ CD TUNER TAPE BAND AUX VOL VOL MUTING REW A demonstration of the display is shown if you have not set the clock. You can reduce the power consumed in standby mode by turning it off. During standby mode Hold down [-DISP/–DEMO] until “NO DEMO” is displayed.
Using the timers PL PLAY REC SLEEP CLOCK AUTO UTO OFF TIMER DISC 2 3 4 5 6 7 8 9 0 10 1 PROGRAM S.SOUND EQ PRESET EQ CD TUNER TAPE BAND AUX VOL VOL MUTING REW CLEAR FF CD DISP DIMMER PLAY MODE To cancel the timer Press [rPLAY/REC] to clear the timer indicator from the display. (The timer comes on at the set time everyday if the timer is on.) To change the settings (when the unit is on) To change the play/record times Do steps 1, 2, 3 and 5. To change the source or volume 1.
Troubleshooting guide Before requesting service, make the below checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem: In the U.S.A., contact the Panasonic Customer Call Center at 1-800-211-7262, or e-mail consumerproducts@panasonic.com, or web site (http://www.panasonic.com). In Canada, contact Panasonic Canada Inc. Customer Care Centre at 905-624-5505, web site (www.panasonic.ca), or an authorized Servicentre closest to you.
Specifications AMPLIFIER SECTION SC-AK310 CASSETTE DECK SECTION SPEAKER SECTION SB-AK110 Power output 10% Total harmonic distortion 60 Hz–3 kHz, both channels driven (Low channel) 40 W per channel (6 Ω) 3 kHz–16 kHz, both channels driven (High channel) 40 W per channel (6 Ω) Total Bi-Amp power 80 W per channel Power output 10% Total harmonic distortion 1 kHz, both channels driven (Low channel) 55 W per channel (6 Ω) 10 kHz, both channels driven (High channel) 55W per channel (6 Ω) Total Bi-Amp power 110
Limited Warranty (ONLY FOR U.S.A.) Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico, Inc. Ave. 65 de Infantería, Km. 9.
