RT70-30.book Page 1 Thursday, April 13, 2006 1:45 PM Recordable DVD Home Theater System Operating Instructions Model No. SC-RT30 SC-RT70 Operations Guide Before using this product, perform setup and connections after carefully reading the Setup Guide. Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Before connecting, operating or adjusting this product, please read the instructions completely.
RT70-30.book Page 2 Thursday, April 13, 2006 1:45 PM Caution for AC Mains Lead (For United Kingdom) (“EB” area code model only) For your safety, please read the following text carefully. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5-ampere fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to BS1362.
RT70-30.book Page 3 Thursday, April 13, 2006 1:45 PM Playing back Playing discs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 Selecting recorded programmes (titles) to play —Direct Navigator . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 Changing audio during play . . . . . . . . . . . . . . . . . . . . . .30 Operations during play . . . . . . . . . . . . . . . . . . . . . . . . . .31 Using menus to play MP3 and still pictures (JPEG/TIFF). .
RT70-30.book Page 4 Thursday, April 13, 2006 1:45 PM Accessories/The remote control information Accessories The remote control information Please check and identify the supplied accessories. Use numbers when asking for replacement parts. (Product numbers correct as of March 2006. These may be subject to change.) ∏ 1 Remote control [RT30] (EUR7662Y20) [RT70] (EUR7662YA0) ∫ Batteries ≥Insert so the poles (i and j) match those in the remote control.
RT70-30.book Page 5 Thursday, April 13, 2006 1:45 PM Control reference guide C D E 1 2 F G 3 H 4 I 5 6 7 J K 8 L 9 : ; < = > ? @ A B M N O P Q R S T U VIDEO Plus+ 1 Turn the unit on 2 Select the source DVD, FM/AM, AUX/F MUSICP 3 Select channels and title numbers, etc.
RT70-30.
RT70-30.book Page 7 Thursday, April 13, 2006 1:45 PM Disc type Indication in these instructions Logo Instructions Disc type Indication in these instructions Logo DVD-Video DVD-Audio DVD-RW (VR format) [DVD-V] [DVD-A] [-RW‹VR›] High quality movie and music discs Audio CD [CD] High fidelity music DVD-RW recorded on another DVD Recorder§1 discs ≥You can play programmes that allow “One time only recording” if they have been recorded to a CPRM compatible disc.
RT70-30.book Page 8 Thursday, April 13, 2006 1:45 PM STEP 1 Front and surround speaker assembly [RT70] Included parts to be used 2 Front and 2 Surround speakers (with cover plate) 4 Stands ≥ 2aStands with short cable: For front speakers ≥ 2aStands with long cable: For surround speakers Preparation ≥ To prevent damage or scratches, lay down a soft cloth and perform assembly on it. ≥ For assembly, use Phillips-head and flathead screwdrivers.
RT70-30.book Page 9 Thursday, April 13, 2006 Attach the speaker to the stand. 1 Pull out the end of the speaker cable and position it between the ridges. 2 Attach the speaker to the stand. Cover plate Before attaching the speaker, use a flathead screwdriver carefully to remove the cover plate, and keep for wall-mount use (➡ 17). Speaker Ridges Cable Stand Stand 4 Secure the speaker to the stand. 5 Connect the speaker cable.
RT70-30.book Page 10 Thursday, April 13, 2006 1:45 PM STEP 2 Positioning and connection of speakers Included parts to be used 2 Speaker cables [RT70] 3 1 FRONT Lch SURROUND Lch CENTER FRONT Lch SURROUND Lch CENTER 1 3 5 6 4 2 FRONT Rch SURROUND Rch SUB WOOFER 1 5 2 Sheets of speaker cable stickers FRONT Rch SURROUND Rch SUB WOOFER 2 4 6 Place the speakers. Preparation [RT70] Check to make sure the screws on the front and surround speakers are not loose.
RT70-30.book Page 11 2 Thursday, April 13, 2006 1:45 PM Connect the speaker cables. e.g. [RT70] Center speaker 1 Attach the speaker cable stickers (included) to speaker cables to make connection easier. 2 Insert the speaker cables into the terminals in accordance with the stickers you just attached and the diagram below. [RT30] All speaker cables are fixed to the back of the speakers from the time of shipment. You only need to connect the speaker cables to the terminal on this unit.
RT70-30.book Page 12 Thursday, April 13, 2006 1:45 PM STEP 3 Video connections Included parts to be used 2 RF coaxial leads (black) 1 RF coaxial lead (grey) This unit Use the supplied RF coaxial leads To prevent interference patterns from appearing on your TV, use only the supplied RF coaxial leads when you connect this unit to your TV and aerial outlet or aerial lead, as shown in connection types A–C. ≥ Keep the RF coaxial leads as far away as possible from other leads.
RT70-30.book Page 13 1:45 PM Connecting to a television and Satellite/Digital terrestrial receiver Using a fully wired 21-pin Scart lead ≥ You can use a variety of Q Link functions by connecting the unit to a Q Link compatible television (➡ 57). ≥ You can enjoy high-quality viewing by connecting the unit to an RGB compatible television.
RT70-30.book Page 14 Thursday, April 13, 2006 1:45 PM STEP 3 Video connections C Connecting to a television and VCR Using a fully wired 21-pin Scart lead ≥ You can use a variety of Q Link functions by connecting the unit to a Q Link compatible television (➡ 57). ≥ You can enjoy high-quality viewing by connecting the unit to an RGB compatible television.
RT70-30.book Page 15 Thursday, April 13, 2006 1:45 PM In the patterns “A”–”C” (➡ 12–14), you can also connect this unit and TV with the VIDEO OUT, S VIDEO OUT, and COMPONENT VIDEO OUT terminals instead of connecting with a fully wired 21-pin Scart cable. Connecting to a television with VIDEO terminal The S VIDEO OUT terminal achieves a more vivid picture than the VIDEO OUT terminal. (Actual results depend on the television.
RT70-30.book Page 16 Thursday, April 13, 2006 1:45 PM STEP 4 Radio and AC mains lead connections Included parts to be used AM loop aerial 1 FM indoor aerial AC mains lead Connect the aerials. AM loop aerial Stand the aerial up on its base. Place the aerial where reception is best. Keep loose aerial cable away from other wires and cables. Push up. Insert the aerial cables fully. White Red Click! Black FM indoor aerial Affix this end of the aerial where reception is best.
RT70-30.book Page 17 Thursday, April 13, 2006 1:45 PM Speaker installation options Front speaker [RT30] Surround speaker [RT30] You can attach all of the speakers (except subwoofer) to a wall. ≥ The wall or pillar on which the speakers are to be attached should be capable of supporting 10 kg per screw. Consult a qualified building contractor when attaching the speakers to a wall. Improper attachment may result in damage to the wall and speakers.
RT70-30.book Page 18 Thursday, April 13, 2006 1:45 PM TV Tuning (Auto Setup) 4 Í When setup has completed, the confirmation screen appears. THEATER Press [ENTER]. 5 The owner ID settings screen appears. Press [1] and press the numbered buttons to enter your choice of a 4digit PIN number. Numbered buttons ¢ Owner ID PIN number ¢¢¢¢ Name House No.
RT70-30.book Page 19 Thursday, April 13, 2006 1:45 PM This unit is not designed to control (turn on or change channels on) your satellite receiver. However, you can use VIDEO Plus+ Recording by making the satellite receiver’s PlusCode numbers available for recognition on this unit. Take the following steps to make all satellite stations available for recognition on this unit.
RT70-30.book Page 20 Thursday, April 13, 2006 1:45 PM Set up to match your television and remote control THEATER TV Í 6 TV operation buttons DVD Press [3, 4] to select the TV aspect and press [ENTER]. TV Aspect Setup 16:9 WIDE TV 16:9 Tuning Disc Picture Sound Display Connection Others Numbered buttons 3,4,2,1 ENTER ∫ Turn on the mains for the television (and connected equipment) and select the AV input for this unit. ∫ Press [THEATER] to switch the remote control to operate this unit.
Thursday, April 13, 2006 1:45 PM Television operation You can operate the TV through the unit’s remote control. Point the remote control at the television While pressing [Í TV], enter the code with the numbered buttons. e.g. 01: [0] ➡ [1] Manufacturer and Code No.
RT70-30.book Page 22 Thursday, April 13, 2006 1:45 PM Important notes for recording [RAM] [-R] [-R\DL] [-RW‹V›] [+R] [+R\DL] [+RW] Both main and secondary audio can be recorded You can change the audio during playback. (➡ 30, Changing audio during play) Select the main or secondary audio before recording (➡ 51, Bilingual Audio Selection) The selected audio only is recorded.
RT70-30.book Page 23 Thursday, April 13, 2006 1:45 PM Depending on the content being recorded, the recording times may become shorter than indicated. DVD-RAM DVD-R, DVD-RW, 9.4 GB Recording Mode +R, +RW (Double4.7 GB 4.7GB sided§1) XP (High picture 1 h. 2 h. 1h. quality recording) SP (Standard 2 h. 4 h. 2h. recording) LP (Long recording) 4 h. 8 h. 4h. 8 h. 16 h. 8 h. EP (Extra long recording) (6 h.§2) (12 h.§2) (6 h.§2) 8 h. 8 h. FR (Flexible 8 h.
RT70-30.book Page 24 Thursday, April 13, 2006 1:45 PM Recording television programmes 3 6 _ ` VOLUME ∫ 1 4 2 _ ` VOLUME ; ∫ FUNCTIONS 3,4,2,1 ENTER RETURN AUDIO STATUS VIDEO Plus+ 5 [RAM] [-R] [-R]DL] [-RW‹V›] ≥ You can record up to 99 titles on one disc. [+R] [+R]DL] [+RW] ≥ You can record up to 49 titles on one disc. See also the notes “Important notes for recording” (➡ 22). ]Note] ≥ [RAM] It is not possible to record continuously from one side of a double sided disc to the other.
Thursday, April 13, 2006 1:45 PM To specify a time to stop recording— One Touch Recording Playing while you are recording [RAM] [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] During recording Press [¥ REC] on this unit to select the recording time. ≥ The unit’s display changes as shown below. OFF 0:30 ""# OFF 1:00 ""# OFF 1:30 ""# OFF 2:00 ^" Counter (cancel) ,"" OFF 4:00 ,"" OFF 3:00 ,} ≥ This does not work during timer recordings (➡ 26) or while using Flexible Recording (➡ below).
RT70-30.book Page 26 Thursday, April 13, 2006 1:45 PM Timer recording 2 Press the numbered buttons to enter the PlusCode number. ≥ To correct the number Press [2] to move back to correct a digit. THEATER 3 DVD Press [ENTER].
Thursday, April 13, 2006 1:45 PM Manually programming timer recordings You can enter up to 16 programmes up to a month in advance. (Each daily or weekly programme is counted as one programme.) 1 Press [PROG/CHECK]. Timer Recording No. Name To cancel recording when recording has already begun 1 Press [∫]. The confirmation screen appears.
RT70-30.book Page 28 Thursday, April 13, 2006 1:45 PM Timer recording Refer to the control reference on page 26. Check, change or delete a programme Even when the unit is in standby mode, you can display the timer recording list by pressing [PROG/CHECK]. Press [PROG/CHECK]. Icons F [ l W F X Timer recording standby is activated. This programme is currently recording. The times overlap those in another programme.
RT70-30.book Page 29 Thursday, April 13, 2006 1:45 PM Recording from a satellite/digital terrestrial receiver THEATER INPUT DVD AUX To record programmes from a SKY Digital STB/digital terrestrial receiver using timer programming Preparation ≥ Make sure you connect the AV2 input terminal of this unit to “VCR Scart Terminal” of a SKY Digital STB/digital terrestrial receiver with a 21-pin Scart lead (➡ 13). ≥ Set “AV2 Input” and “Ext Link” to match the connected equipment in the Setup menu (➡ 51).
RT70-30.book Page 30 Thursday, April 13, 2006 1:45 PM Playing discs 1 2 Numbered buttons 5 :, 9 [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [-RW‹VR›] 4 Simply select the recorded programmes (titles) you want to play from the menu. TIME SLIP MANUAL SKIP DIRECT NAVIGATOR 3,4,2,1 ENTER 1 Press [THEATER] to switch the remote control to operate this unit. 2 Press [DVD] to select the DVD drive.
RT70-30.book Page 31 Thursday, April 13, 2006 1:45 PM Operations during play Stop Pause The stopped position is memorized. Resume play function Press [1] (PLAY) to restart from this position. The stopped position is cleared when: s you press [∫] several times. s you open the tray. s [DVD-A] [CD] [VCD] and MP3 you turn the unit off. Press [;]. Press again or press [1] (PLAY) to restart play. Playing discs Press [∫]. Press [6] or [5]. Search Skip ≥ The speed increases up to 5 steps.
RT70-30.book Page 32 Thursday, April 13, 2006 1:45 PM Using menus to play MP3 and still pictures (JPEG/TIFF) Playing MP3 and still pictures (JPEG/ TIFF) THEATER 1 DVD Press [DIRECT NAVIGATOR]. ∫MP3 Numbered buttons G: Group No. T: Track No. in the group TOTAL: Track No./Total tracks in all groups Menu G 1 T 1 TOTAL 1/111 :, 9 ∫ Number 0 – 9 Prev. Next SELECT DIRECT NAVIGATOR FUNCTIONS ENTER Selected group Page 001/024 RETURN ≥Files are treated as tracks and folders are treated as groups.
Thursday, April 13, 2006 1:45 PM To select other folder (group) Useful functions during still picture play You can display still pictures one by one with constant interval. While the JPEG Menu is displayed MP3 1 While the file list is displayed 1 Press [3, 4, 2, 1] to select “Folder” and press [SUB MENU]. Press [1]. G: Selected group No. /Total group No. If the group has no track, “– –” is displayed as group number.
RT70-30.book Page 34 Thursday, April 13, 2006 1:45 PM Using menus to play MP3 and still pictures (JPEG/TIFF) Regarding MP3 and still pictures ≥ Compatible formats: ISO9660 level 1 or 2 (except for extended formats) and Joliet ≥ This unit is compatible with multi-session but reading or play of the disc may take time if there are a lot of sessions.
RT70-30.book Page 35 Thursday, April 13, 2006 1:45 PM Using on-screen menus/FUNCTIONS window and Status message Disc menu—Setting the disc content Soundtrack§ [DVD-V] [DVD-A] Select the audio and language (➡ below, Audio attribute, Language). THEATER 3,4,2,1 ENTER The disc’s audio attributes appear. [VCD] (SVCD) Select the soundtrack number (1–2). Subtitle§ [DVD-V] [DVD-A] Turn the subtitle on/off and select the language (➡ below, Language).
RT70-30.book Page 36 Thursday, April 13, 2006 1:45 PM Using on-screen menus/FUNCTIONS window and Status message Refer to the control reference on page 35. Picture menu—Change the picture quality Playback NR Reduces noise and picture degradation. On !"# Off Progressive§ (➡ 65) FUNCTIONS window By using the FUNCTIONS window you may access the main functions quickly and easily. Preparation ≥ Press [THEATER] to switch the remote control to operate this unit. ≥ Press [DVD] to select the DVD drive.
RT70-30.book Page 37 Thursday, April 13, 2006 1:45 PM Deleting titles THEATER DVD DELETE :, 9 ; Preparation ≥ Turn on the television and select the appropriate video input to suit the connections to this unit. ≥ Turn the unit on. ≥ Press [THEATER] to switch the remote control to operate this unit. ≥ Press [DVD] to select the DVD drive. ≥ Insert the disc (➡ 24). ≥ [RAM] Release protection (➡ 44). 1 While stopped 2 Press [FUNCTIONS]. Press [3, 4] to select “Delete” and press [ENTER].
RT70-30.book Page 38 Thursday, April 13, 2006 1:45 PM Editing titles/chapters Editing titles/chapters and playing chapters THEATER DVD 1 During play or while stopped 2 Press [DIRECT NAVIGATOR]. Press [3, 4, 2, 1] to select the title.
RT70-30.book Page 39 Thursday, April 13, 2006 1:45 PM Title operations After performing steps 1–3 (➡ 38) Delete [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] Properties ≥Once deleted, the recorded contents are lost and cannot be restored. Make certain before proceeding. ≥[-R] [-R]DL] [+R] [+R]DL] The available recording time on a disc does not increase when you delete titles. ≥[-RW‹V›] [+RW] Available recording space on a disc increases only when the last recorded title is deleted.
RT70-30.book Page 40 Thursday, April 13, 2006 1:45 PM Creating, editing and playing playlists 3 THEATER 4 DVD Press [3, 4] to select “Playlists” and press [ENTER]. Press [3, 4, 2, 1] to select “Create” and press [ENTER]. Playlists DVD-RAM Playlist View -- -- -- -- -- Create -- Previous Page 01/01 Next ENTER RETURN 5 3,4,2,1 ENTER Press [2, 1] to select the source title and press [4]. ≥Press [ENTER] to select all the chapters in the title, then skip to step 7.
Thursday, April 13, 2006 1:45 PM Editing and playing playlists/chapters [RAM] [-RW‹VR›] (Play only) 1 2 3 4 Playlist operations After performing steps 1–5 (➡ left) Delete§ While stopped [RAM] Press [FUNCTIONS]. Press [3, 4] to select “To Others” and press [ENTER]. Press [3, 4] to select “Playlists” and press [ENTER]. Press [3, 4, 2, 1] to select the playlist. Properties [RAM] [-RW‹VR›] Press [2, 1] to select “Delete” and press [ENTER]. Once deleted, the playlists are lost and cannot be restored.
RT70-30.book Page 42 Thursday, April 13, 2006 1:45 PM Copying from a video cassette recorder DV automatic recording (DV Auto Rec) THEATER INPUT DVD [RAM] [-R] [-RW‹V›] [+R] [+RW] [RAM] Programmes are recorded as a title while at the same time chapters are created at each break in the images and the playlist is created automatically. When “DV Auto Rec” screen is displayed. Numbered buttons DV Auto Rec DV unit is connected.
RT70-30.book Page 43 Thursday, April 13, 2006 1:45 PM Entering text Refer to the control reference on page 42. 2 [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] You can give names to recorded titles, etc. The maximum number of characters: Characters Title 64 (44§) ≥To delete a character Press [3, 4, 2, 1] to select the character in the name field and press [;]. 64 Disc § Title name for timer recording 64 [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] ≥Using the numbered buttons to enter characters e.
RT70-30.book Page 44 Thursday, April 13, 2006 1:45 PM DVD management Cartridge-protection THEATER [RAM] (with a cartridge) With the write-protect tab in the protect position, play automatically starts when inserted in the unit. DVD 3,4,2,1 ENTER Deleting all titles and playlists— Delete all titles FUNCTIONS RETURN [RAM] After performing steps 1–3 (➡ left) 4 Press [3, 4] to select “Delete all titles” and press [ENTER]. Press [2, 1] to select “Yes” and press [ENTER].
Thursday, April 13, 2006 1:45 PM Selecting whether to show the Top Menu first–Auto-Play Select [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] You can select whether to show the top menu after finalizing. Make selections before finalizing the disc. After performing steps 1–3 (➡ 44) 4 5 Press [3, 4] to select “Auto-Play Select” and press [ENTER]. Press [3, 4] to select the item and press [ENTER]. Top Menu:The top menu appears first. Title 1: The disc content is played without displaying the top menu.
RT70-30.book Page 46 Thursday, April 13, 2006 1:45 PM Child Lock The radio THEATER DVD _ ` VOLUME WXCH THEATER FM/AM WXCH Numbered buttons _ ` VOLUME 6, 5 ENTER RETURN VIDEO Plus+ ENTER VIDEO Plus+ RDS The Child Lock deactivates all buttons on the unit and remote control. Use it to prevent other people from operating the unit. Preparation ≥Press [THEATER] to switch the remote control to operate this unit. ≥Press [DVD] to select the DVD drive.
Thursday, April 13, 2006 1:45 PM ∫ If noise is excessive Press [FM MODE]. Each time you press the button: FM: Changes between stereo and forced monaural. [“ST” (stereo) or “MONO” (monaural) lights up in the display.] AM: BP1 ) BP2 ) BP3 ) BP4 (BPlBeat Proof) ^-------------------------------------------} Select between BP1 and BP4 that receives good reception. The FM mode is cancelled when you change the frequency. Selecting the preset channels 1 2 Press [FM/AM] to select the “FM” or “AM”.
RT70-30.book Page 48 Thursday, April 13, 2006 1:45 PM Sound effect Refer to control reference on page 49. Changing the sound quality Using the built-in sound quality settings, you can create a 5.1 channel effect while using 2channel audio. This does not work with multi-channel audio. Press [SFC/EQ] several times to select the desired setting. Sound Field Control (SFC) Available with: ≥2-channel sound Each time you press the button: e.g.
[RT30] Thursday, April 13, 2006 1:45 PM Muting the sound Press [MUTING]. SFC/EQ [RT70] SURROUND ENHANCER (Settings can be confirmed on the display or the television screen.) “MUTING” flashes on the e.g. Display unit's display. THEATER DVD To cancel ≥Press [MUTING] again or reduce the volume to minimum “VOL 0”, then raise it to the required level. ≥Muting is cancelled when you switch the unit to standby. Numbered buttons Sound effect RT70-30.
RT70-30.book Page 50 Thursday, April 13, 2006 1:45 PM Changing the unit’s settings Refer to the control reference on page 49. Common procedures Preparation ≥ Press [THEATER] to switch the remote control to operate this unit. ≥ Press [DVD] to select the DVD drive. 1 While stopped Press [FUNCTIONS]. Press [3, 4] to select “To Others” and press [ENTER]. Press [3, 4] to select “Setup” and press [ENTER].
Tabs Thursday, April 13, 2006 1:45 PM Menus Picture Comb Filter Select the picture sharpness when recording. The setting is fixed with “On” if you set “TV System” to “NTSC” (➡ below). Still Mode Select the type of picture shown when you pause play (➡ 65, Frames and fields). Sound Dynamic Range Compression [DVD-V] (Dolby Digital only) Change the dynamic range for late night viewing. Bilingual Audio Selection Options (Boxed items are the factory presets.) ≥ On: Select it to record clear picture.
RT70-30.book Page 52 Thursday, April 13, 2006 1:45 PM Changing the unit’s settings Refer to the control reference on page 49. Tabs Menus Others Options (Boxed items are the factory presets.) Remote Control (➡ 21) Clock (➡ 55) Owner ID (➡ 18) In order to prevent another person from using this unit if it is stolen, you can set a PIN number and input your personal information. Once the PIN number has been set, you cannot return to the factory preset. Make sure not to forget this.
RT70-30.book Page 53 Thursday, April 13, 2006 1:45 PM Resetting channel setting [Note] When the unit connected to a Q Link-compatible TV with a fully wired 21-pin Scart lead sets itself automatically (➡ 18), only deletion of the programme position can be performed. To change detailed station settings Numbered buttons After performing steps 1–5 6 Press [3, 4, 2, 1] to select a programme position and press [ENTER]. e.g.
RT70-30.book Page 54 Thursday, April 13, 2006 1:45 PM TV System Resetting channel setting Refer to the control reference on page 53. Automatic setting You can restart auto channel setting if the channel reception setting (➡ 18) fails for some reason. After performing steps 1-4 (➡ 53) 5 6 Press [3, 4] to select “Auto-Setup Restart” or “Download from TV” and press [ENTER]. Change this setting if you connect an NTSC television or to record NTSC video from another source.
RT70-30.book Page 55 Thursday, April 13, 2006 1:45 PM Set the clock manually Refer to the control reference on page 53. ≥ Usually, the unit’s channel reception setting function (➡ 18) automatically adjusts the clock to correct time. Under some reception conditions, however, the unit cannot set the clock automatically. ≥ In this case, follow the operation steps below to manually set the clock.
RT70-30.book Page 56 Thursday, April 13, 2006 1:45 PM Using other useful functions You can also enjoy TV broadcasts with this unit’s speakers if you connect the TV to this unit’s AV1 terminal (➡ 12–14). THEATER WXCH While stopped 1 Press [DVD] to select the DVD drive. 2 Press [INPUT] to select “AV1”. 3 Turn on the television and select the channel. 4 Adjust the volume on this unit. ≥Set TV volume minimum. _ ` VOLUME ≥ To listen to the sound from the television, select the appropriate audio out (e.g.
RT70-30.book Page 57 Thursday, April 13, 2006 1:45 PM What is Q Link? Q Link enables you to connect this unit to a Q Link equipped Panasonic TV and perform various linked functions. The following systems from other manufacturers have similar function to Q Link from Panasonic. For details, refer to your television’s operating instructions or consult your dealer.
RT70-30.book Page 58 Thursday, April 13, 2006 1:45 PM Messages On the television Page Cannot finish recording completely. ≥ The programme was copy-protected. ≥ The disc may be full. ≥ The maximum number of times you can record the programme is exceeded. — — 24 Cannot record on the disc. ≥ The disc may be dirty or scratched. 64 Unable to format. Please check the disc. Cannot record. Maximum number of titles exceeded. ≥ Create space by deleting any unnecessary titles.
RT70-30.book Page 59 Thursday, April 13, 2006 1:45 PM Frequently asked questions Is my television progressive output compatible? ≥ If you have a regular television (CRT: cathode ray tube) we recommend using the Scart terminal. You can enjoy high-quality RGB video from this unit by connecting to an RGB compatible television. If you have an LCD/plasma television or LCD projector compatible with progressive scan, connect through the component video terminals for highquality progressive video.
RT70-30.book Page 60 Thursday, April 13, 2006 1:45 PM Troubleshooting guide Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, consult your dealer for instructions. The following do not indicate a problem with this unit: ≥ Regular disc rotating sounds. ≥ Poor reception due to atmospheric conditions. ≥ Image disturbance during search.
Thursday, April 13, 2006 1:45 PM Radio Noise is heard. Sound is distorted. “TUNED” is flashing or doesn’t light. “ST” is flashing or doesn’t light during FM broadcasts. ≥This is being caused by weak signal reception. When listening to FM radio, try the following operations. –Adjust the position of the FM aerial. –Use an FM outdoor aerial. –Press [FM MODE] to set to “MONO”. When listening to AM radio, try the following operations. –Adjust the position of the AM aerial.
RT70-30.book Page 62 Thursday, April 13, 2006 1:45 PM Troubleshooting guide Operation (Continued) The unit is on but cannot be operated. ≥ Some operations may be prohibited by the disc. ≥ The unit is hot (“U59” appears on the display). Wait for “U59” to disappear. ≥ One of the unit’s safety devices may have been activated. Reset the unit as follows: 1 Press [Í/I] on this unit to switch the unit to standby. If the unit doesn’t switch to standby, press and hold [Í/I] on this unit for about 10 seconds.
Thursday, April 13, 2006 1:45 PM Recording, timer recording and copying (Continued) The timer programme ≥ The timer programme remains if set to daily or weekly. remains even after recording finishes. A part or whole of a recorded ≥ If there is a power failure or the plug is disconnected from the household mains title has been lost. socket while recording or editing, the title may be lost or the disc may become unusable. You will have to format the disc ([RAM] [-RW‹V›] [+RW]) or use a new disc.
RT70-30.book Page 64 Thursday, April 13, 2006 1:45 PM Troubleshooting guide Edit Cannot format. ≥ The disc is dirty. Wipe with a damp cloth and then wipe dry. ≥ You tried formatting a disc that is not compatible with this unit. Cannot create chapters. ≥ The unit writes the chapter division information to the disc when you turn it off or remove the disc. The information is not written if there is an interruption to the power before this.
RT70-30.book Page 65 Thursday, April 13, 2006 1:45 PM Glossary Frames and fields Frames refer to the single images that constitute the video you see on your television. Each frame consists of two fields. u Frame r Field Field ≥ A frame still shows two fields, so there may be some blurring, but picture quality is generally better. ≥ A field still shows less picture information so it may be rougher, but there is no blurring.
RT70-30.
Thursday, April 13, 2006 1:45 PM Video Video system: [RT70] PAL colour signal, 625 lines, 50 fields NTSC colour signal, 525 lines, 60 fields Recording system: MPEG2 (Hybrid VBR) Video in (PAL/NTSC): AV1/AV2 (21 pin), AV3 (pin jack) 1 Vp-p 75 ≠, termination S-Video in (PAL/NTSC): AV2 (21 pin), AV3 (S terminal) 1 Vp-p 75 ≠, termination Video out (PAL/NTSC): AV1/AV2 (21 pin), Video Out (pin jack) 1 Vp-p 75 ≠, termination S-Video out (PAL/NTSC): AV1 (21 pin), S-Video Out (S terminal) 1 Vp-p 75 ≠, terminatio
RT70-30.book Page 68 Thursday, April 13, 2006 1:45 PM Index Angle . . . . . . . . . . . . . . . . . . . . . . . 35 Audio attribute . . . . . . . . . . . . . . . . . . . . 35 language . . . . . . . . . . . . . . . . . . . 35 playback . . . . . . . . . . . . . . . . . . . 30 AV-in NR . . . . . . . . . . . . . . . . . . . . . 36 Center Focus . . . . . . . . . . . . . . . . . 48 Change Thumbnail. . . . . . . . . . . . 39 Channel audio . . . . . . . . . . . . . . . . . . . . . . 35 settings . . . . . . . . .
