Operation Manual

ManualsBrandsPanasonic ManualsHome Theatersc rt 30

Positioning and connection of speakers

Operating Instructions

Recordable DVD

Home Theater System

Video connections

Radio and AC mains lead connections

Channel reception settings and TV aspect settings

Other settings and optional speaker installation (Perform if necessary)

All necessary steps of setup are completed.

Please see the Operations Guide for recording and playback operation.

Set up to match your television and remote control …………… 7

Speaker installation options …………………………Back cover

Model No.

SC-RT30

RQT8729-E

RT30_EP(En).indd 1RT30_EP(En).indd 1 2006/04/17 9:53:522006/04/17 9:53:52

Summary of content (8 pages)

PAGE 1
Operating Instructions Recordable DVD Home Theater System Model No. SC-RT30 E ST P 1 E ST P 2 E ST P 3 E ST P 4 Positioning and connection of speakers Video connections Radio and AC mains lead connections Channel reception settings and TV aspect settings All necessary steps of setup are completed. Please see the Operations Guide for recording and playback operation.
PAGE 2
Positioning and connection of speakers 2 Included parts to be used 5 3 1 FRONT Lch SURROUND Lch CENTER FRONT Lch SURROUND Lch CENTER 1 3 5 1 6 4 2 FRONT Rch SURROUND Rch SUB WOOFER 2 Sheets of speaker cable stickers FRONT Rch SURROUND Rch SUB WOOFER 2 4 6 Connect the speaker cables. Attach the speaker cable stickers (included) to each speaker cable to make connection easier. e.g. Surround speaker Speaker cable sticker SURROUND Lch 1 Place the speakers.
PAGE 3
Video connections Included parts to be used 2 RF coaxial cables Main unit Video cable Make sure to use the pair of supplied RF coaxial cables Use the pair of supplied RF coaxial cables only when you make connections to the unit through its RF IN and RF OUT terminals. Striping may appear and disrupt images on the TV if you use different cables for connection.
PAGE 4
Video connections C Connection with a television and digital/satellite receiver or decoder To the aerial Aerial cable Fully wired 21-pin Scart cable 3 Connecting a terminal other than the 21-pin Scart terminal ( page 5) RF coaxial cable (included) Television’s rear panel AV1 (TV) (DECODER/EXT) AV2 \Required\setting\ “AV2 Input” and “AV2 Connection” settings in the RF coaxial cable Setup menu (Operations Guide page 37) (included) When you wish to view another programme this unit is recording wh
PAGE 5
Other connections In the patterns “A”– “D”( page 3–4), you can also connect the main unit and TV with the VIDEO OUT, S VIDEO OUT, and COMPONENT VIDEO OUT terminals instead of connecting with a fully wired 21-pin Scart cable. Television's rear panel The S VIDEO OUT terminal achieves a more vivid picture than the VIDEO OUT terminal. (Actual results depend on the television.
PAGE 6
Channel reception settings and TV aspect settings You can download the tuning positions from the television. This unit’s Auto Clock Setting function synchronizes the time when the TV channel that is broadcasting time and date information is tuned. After pressing [] to turn the unit on for the first time, the unit starts necessary setup. If the setup screen does not appear, press [DVD], and turn the main unit off and on again. If the Country setting menu appears on the television.
PAGE 7
Other settings and optional speaker installation (Perform if necessary) Set up to match your television and remote control [Note] When connected to a regular television (CRT: Cathode ray tube) or a multi system television using PAL mode, even if it is progressive compatible, progressive output can cause some flickering. Turn off “Progressive” if this occurs . Picture will not be displayed correctly if connected to an incompatible television.
PAGE 8
Refer to the control reference on page 6. Speaker installation options When other Panasonic products respond to this remote control When other Panasonic products placed nearby affect this unit’s remote control, change the remote control code on the main unit and the remote control (the two must match). Use “DVD 1”, the factory set code, under normal circumstances. To change the code on the main unit While stopped 1 Press [FUNCTIONS].