User Guide

RQTX0022
9
Simple Setup
The QUICK SETUP screen assists you to make necessary settings.
To display the picture from the main unit, turn on your television and change its video input mode
(e.g. VIDEO 1, AV 1, etc.).
≥To change your television’s video input mode, refer to its operating instructions.
≥This remote control can perform some basic television operations (➜ page 10).
To change these settings later
Select “QUICK SETUP” in the “Others” menu (➜ page 25).
∫ Details of settings
≥ Underlined items are the factory settings in the above table.
step
6
Performing QUICK SETUP
MANUAL SKIP
, , ,
ENTER
SETUP
DVD
RETURN
1
Turn on the unit.
2
Select “DVD/CD”.
3
Show the QUICK SETUP
screen.
4
Follow the messages
and make the settings.
≥Menu Language
≥TV Type
≥TV Aspect
≥Video Out (AV/Component)
(For details ➜ below)
5
Press to finish QUICK
SETUP.
6
Press to exit.
DVD
SETUP
Setup
ENTER
RETURN
to select and press
to return
QUICK SETUP
Select the menu language.
English
Deutsch
Cesky
Polski
Magyar

Select
Register
ENTER
RETURN
ENTER
SETUP
Menu Language
Choose the language for the
on-screen messages.
≥ English ≥ Français ≥ Español ≥ Deutsch ≥ Polski
≥ Русский ≥ Çesky ≥ Magyar
TV Type
Select to suit the type of television.
≥ Standard (Direct View TV)
≥ CRT Projector ≥ LCD TV/Projector
≥ Projection TV ≥ Plasma TV
TV Aspect
Choose the setting to suit your
television and preference.
≥ 4:3
: Regular aspect television
≥ 16:9: Widescreen television
Video Out (AV/Component)
Choose the video signal format to be
output from the SCART (AV) and
COMPONENT VIDEO OUT
terminals.
≥ Video/YPbPr
≥S-Video/YPbPr
≥ RGB/No Output
Performing QUICK SETUP
0022En_p03-13.fm Page 9 Wednesday, April 25, 2007 5:04 PM