User Guide

7
RQT8043
RQTX0043
Speaker installation optionsSpeaker installation options
7 Attaching to a wall
You can attach all of the speakers (except subwoofer) to a wall.
• The wall or pillar on which the speakers are to be attached should be capable of supporting 10 k
per
screw. Consult a qualifi ed building contractor when attaching the speakers to a wall. Improper attachment
may result in damage to the wall and speakers.
7 Fitting speaker stands
(not included)
(For center and satellite surround speakers)
Ensure the stands meet these conditions before purchasing them.
Note the diameter and length of the screws and the distance between screws as shown in the diagram.
• The stands must be able to support over 10 k .
• The stands must be stable even if the speakers are in a high position.
Example: Center speaker
Metal screw holes
For attaching to speaker stands
Speaker stand
(not included)
5 mm, pitch 0.8 mm
Plate thickness plus
7 mm to 10 mm
60 mm
7 Reattach the speaker cable
1 Insert the
cable from
the bottom.
2 Pull out the
cable through
the hole.
Leave about
80 mm
*
For : Front and Surround speakers
For
: Front speakers
1 Drive the screw (not included) into the
wall
2 Fit the speaker securely onto the screw(s) with the
hole(s)
384 mm
Center speaker
190 mm
Surround speaker
*
Front/Surround speakers
Attach to a wall without the
base and stand.
Ø7.0 to 9.4 mm
4.0 to 6.0 mm
Wall or pillar
Ø4.0 mm
At least 30 mm
RQTX0043-3B_new.indd 7RQTX0043-3B_new.indd 7 4/2/07 1:50:03 PM4/2/07 1:50:03 PM