User Guide

6
RQT8043
RQTX0043
2 Front speakers
2 Front speakers
and
2 Surround
speakers
2 Stands (with cable)
4 Stands
• 2 x stands with short cable: For
front speakers
• 2 x stands with long cable: For
surround speakers
2 Bases
4 Bases
8 Screws
16 Screws
Speaker assembly
Preparation
• To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
• For assembly, use a Phillips-head screwdriver.
• There is no difference between the right and left speakers and stands.
• For optional wall mount (\ page 7).
Make sure you have all the indicated components before starting assembly, setup, and connection.
7 Preventing the speakers from falling
• You will need to obtain the appropriate screw
eyes to match the walls or pillars to which they
are going to be fastened.
• Consult a qualifi ed housing contractor concerning
the appropriate procedure when attaching to
a concrete wall or a surface that may not have
strong enough support. Improper attachment may
result in damage to the wall or speakers.
2
1
3
Tighten
securely.
4
5
Slide into the
groove.
2
1
Position the cable
between the ridges.
5 Press into the groove.
3 Tighten securely.
4 Insert the wire fully.
+: White
−: Blue
Push!
Leave about 80 mm
1
2
Thread the speaker cable
through the base.
3 Press into the groove.
1 Tighten securely.
2 Insert the wire fully.
+: White
−: Blue
Push!
Leave about 100 mm
You can remove and use the
cable from the stand. To reattach
the cable (\ page 7).
Attach the
speaker.
Speaker assembly option
String (not included)
Thread from the wall to the
speaker and tie tightly.
Rear of the speaker
Screw eye
(not included)
Wall
Approx.
150 mm
1
2
RQTX0043-3B_new.indd 6RQTX0043-3B_new.indd 6 4/2/07 1:49:59 PM4/2/07 1:49:59 PM