User Guide

GETTING STARTED
ENGLISH
ENGLISH
8
RQT8043
RQTX0068
Optional connection for set top box
Set top box
(not included)
Television
(not included)
Rear panel of
this main unit
SCART cable
(not included)
SCART cable (not included)
• To listen to the sound from the television, select the appropriate
audio out (example: Monitor) on the television.
Sound from the television
• Press [EXT-IN] (\ page 37, Operations Guide) to select the
“AV” audio input on the remote control.
You can change the video signal output from the SCART (AV) terminal from “RGB” to either “S-Video” or
“Video” to suit the type of television you are using.
•
Select “S-Video/YPbPr” or “Video/YPbPr” from QUICK SETUP (\ page 7).
•
Set “Video Mode” to “Off” (\ page 27, “HDMI” tab, Operations Guide).
•
This connection will also enable you to play audio from your television through your home theater system.
Refer to “Operating other equipment” (\ page 35, Operation Guide).
•
Do not use the HDMI cable when you use the scart cable for the connection.
Operating other equipment
RQTX0068-B_setup_new1.indd 8RQTX0068-B_setup_new1.indd 8 2/27/07 3:57:32 PM2/27/07 3:57:32 PM