User Guide

7
RQT7937
■ Connecting a television with a VIDEO IN terminal
VIDEO OUT terminal
Do not connect the unit through a video cassette recorder,
because the picture may not be played correctly due to the copy
guard.
Simple setup
Step 2: Television
Television
STEP 2
Video cable
■ Connecting a television with COMPONENT VIDEO IN
terminals
COMPONENT VIDEO OUT terminals
These terminals can be used for either interlace or progressive
output and provide a purer picture than the S-VIDEO OUT
terminal. Connection using these terminals outputs the color
difference signals (P
B
/P
R
) and luminance signal (Y) separately in
order to achieve high fidelity in reproducing colors. The description
of the component video input terminals depends on the television
or monitor (e.g. Y/P
B
/P
R
,Y/B-Y/R-Y, Y/C
B
/C
R
). Connect to terminals
of the same color.
■ Connecting a television with an S-VIDEO IN terminal
S-VIDEO OUT terminal
The S-VIDEO terminal achieves a more vivid picture than the
VIDEO OUT terminal by separating the chrominance (C) and
luminance (Y) signals. (Actual results depend on the television.)
AM ANT
FM ANT
OPTICAL
OUT
S-VIDEO
HAUT-PARLEURS
OUT
VIDEO
AC IN
SUBWOOFER
OUT
R
L
AUX
HIGH (6Ω) LOW (6Ω)
SPEAKERS
(SB-PM91)
R
L
EXT LOOP
75 Ω
OUT
AV
Y
Video cable
AM ANT
FM ANT
OPTICAL
OUT
S-VIDEO
HAUT-PARLEURS
OUT
VIDEO
AC IN
SUBWOOFER
OUT
R
L
AUX
HIGH (6Ω) LOW (6Ω)
SPEAKERS
(SB-PM91)
R
L
EXT LOOP
75 Ω
OUT
AV
P B
S-VIDEO cable
AM ANT
FM ANT
OPTICAL
OUT
SUBWOOFER
OUT
R
L
AUX
HIGH (6Ω) LOW (6Ω)
SPEAKERS
(SB-PM91)
R
L
EXT LOOP
75 Ω
S-VIDEO
HAUT-PARLEURS
OUT
VIDEO
COMPONENT VIDEO OUT
PR PB Y
OUT
R
Video cables
To enjoy progressive video
1. Connect to the component video input terminals on a 480P
1
compatible television. (Video will not be displayed correctly
if connected to an incompatible television.)
2. Select “480p”
1
for Video Output Mode (Picture Menu, ➡ page
19).
• All televisions manufactured by Panasonic and that have
480P
1
input connectors are compatible. Consult the
manufacturer if you have another brand of television.
• If the unit is connected to the television through VIDEO OUT
or S-VIDEO OUT, output will be interlace, irrespective of the
settings.
1
525P/625P
■ Connecting a television with SCART terminal
SCART terminal
To improve picture quality, you can change the video signal output
from the AV terminal from “Video” to either “S-Video” or “RGB”
to suit the type of television you are using (➡ “Video” tab—AV
Output, page 20).
AM ANT
FM ANT
OPTICAL
OUT
S-VIDEO
HAUT-PARLEURS
OUT
VIDEO
AC IN
SUBWOOFER
OUT
R
L
AUX
HIGH (6Ω) LOW (6Ω)
SPEAKERS
(SB-PM91)
R
L
EXT LOOP
75 Ω
OUT
21-pin SCART cable
For the United Kingdom and Continental Europe
For Australia, N.Z., the Middle East and Southeast Asia
(included)
for the Middle East
SC-PM91D EB.indd 7 3/18/2005 2:18:14 PM