User Guide

31
RQT7937
Enjoying more powerful bass
• Connect an active subwoofer (not included).
• Place the subwoofer as close as possible to the front center.
Adjusting the bass
Press [SHIFT] + [SUBWOOFER].
Every time you do this:
SUB.W ON SUB.W OFF
Adjust the volume on the subwoofer to suit your preference.
Using other equipment
Other antenna connections
Use outdoor antennas if radio reception is poor.
FM outdoor antenna (using a television antenna)
• Disconnect the FM indoor antenna.
• The antenna should be installed by a competent technician.
Disconnect the outdoor antenna when the unit is not in use.
Do not use the outdoor antenna during a lightning storm.
AM outdoor antenna
• Run a piece of vinyl wire horizontally across a window or other
convenient location.
• Leave the loop antenna connected.
AM ANT
FM ANT
OPTICAL
OUT
S-VIDEO
HAUT-PARLEURS
OU
T
VIDEO
OUT
SUBWOOFER
OUT
R
L
AUX
HIGH (6Ω) LOW (6Ω)
SPEAKERS
(SB-PM91D)
R
L
EXT LOOP
75
Ω
IN
AV
Audio cable
To the
subwoofer's
input terminal
FM ANT
75
FM outdoor antenna
75 Ω coaxial cable
AM loop
antenna
(included)
AM outdoor antenna
5-12m
Using other equipment
Changing the remote control code
Change the code if you find the remote control unintentionally also
controls other equipment.
1 Change the main unit’s code.
① Press [TUNER/AUX] to select “AUX”.
② Press and hold [TUNER/AUX] on the main unit and then press
and hold [2] (or [1]) on the remote control.
“REMOTE 2” appears on the display.
2 Change the remote control’s code.
Press and hold [ENTER] and [2] (or [1]) on the remote control for
at least 2 seconds.
If the remote control and main unit are using different codes, a message
appears on the main unit’s display showing the main unit’s current code.
Follow step 2 to change the remote control’s code to match it.
Note
SC-PM91D EB.indd 31 3/18/2005 2:18:56 PM