User Guide

15
RQT8043
Setting the clockSetting the clock
This is a 24-hour clock.
1
Press [CLOCK/TIMER] to select “CLOCK”.
Each time you press the button:
CLOCK
˚ PLAY
Original display
˚ REC
2
Within 7 seconds, press [4/REW/4 ] or
[3/FF/¢] to set the time.
3
Press [CLOCK/TIMER] again to confirm.
Displaying the clock
Press [CLOCK/TIMER] to display the clock for few seconds.
• The clock may lose or gain some time over a period. Readjust if
necessary.
Using the sleep timerUsing the sleep timer
This function enables you to turn off the unit automatically
after the set time.
Press [SLEEP, –AUTO OFF] to select your desired time.
SLEEP 30 SLEEP 60 SLEEP 90
SLEEP 120SLEEP OFF
Sleep timer indicator
To cancel
Press [SLEEP, –AUTO OFF] to select “SLEEP OFF”.
Changing the remaining time
Press [SLEEP, –AUTO OFF] to show the remaining time and
press [SLEEP, –AUTO OFF] again to select your desired
time.
• The play and sleep timer or the record and sleep timer can be used
together.
• The sleep timer always has priority. Be sure not to overlap timer
settings.
• The sleep timer turns off when you start recording a disc.
Timer
(Continued on next page)
PM41_8043-1B.indd 15PM41_8043-1B.indd 15 2/21/05 9:18:50 AM2/21/05 9:18:50 AM