User Guide

13
RQT8043
Recording the radioRecording the radio
1
Do the preparatory steps (refer page 12).
2
Tune to the required station (refer page 14).
3
Press [¶REC/8] to start recording.
Recording CDsRecording CDs
1
Do the preparatory steps (refer page 12).
2
Press [CD 6] and then [STOP 7, –DEMO].
3
Press [0 OPEN/CLOSE] to insert the CD.
Press again to close.
4
Press [PLAY MODE] to select your desired mode
(refer page 7).
5
Press [¶REC/8] to start recording.
Recording programmed tracksRecording programmed tracks
1
Program the tracks you want (refer page 9).
2
Press [¶REC/8] to start recording.
Other basic operationsOther basic operations
To Action
erase a recorded
sound
1) Insert the cassette to be recorded on.
2) Press [TAPE `] and then [CLEAR 7 ].
3) Press [¶ REC/8 ].
stop recording Press [CLEAR 7 ].
stop recording
temporarily
1) Press [¶ REC/8 ].
2) Press again to resume recording.
Your attention is drawn to the fact that recording pre-
recorded tapes or discs or other published or broadcast
material may infringe copyright laws.
Erasure preventionErasure prevention
The illustration shows how to remove the tabs to prevent
recording. To record on the tape again, cover as shown.
Side A
Tab for side ATab for side B
To re-record
Normal tape
Adhesive tape
PM41_8043-1B.indd 13PM41_8043-1B.indd 13 2/21/05 9:18:46 AM2/21/05 9:18:46 AM