User Guide
Matsushita Electric Industrial Co., Ltd.
Web Site: http://www.panasonic.co.jp/global/
RQT7928-2B
L1204CP2025
En
Specifi cations
AMPLIFIER SECTION
RMS Output Power both channel driven
10% Total harmonic distortion
1
kHz
(Low channel) SC-PM19 41
W per channel (6
Ω)
8
kHz
(High channel) SC-PM19 39
W per channel (6
Ω)
Total Bi-Amp power
SC-PM19 80 W per channel
Output Impedance
Headphone 16Ω – 32Ω
FM TUNER SECTION
Frequency range
87.50
MHz – 108.00
MHz (50
kHz steps)
Sensitivity 1.02
µV (IHF)
S/N 26
dB 1.00
µV
Antenna terminal(s) 75
Ω (unbalanced)
AM TUNER SECTION
Frequency range
522 kHz – 1629
kHz (9
kHz steps)
520 kHz – 1630
kHz (10
kHz steps)
Sensitivity
S/N 20
dB (at 999
kHz) 900
µV/m
CASSETTE DECK SECTION
Track system 4 track, 2 channel
Heads
Record/playback Solid permalloy head
Erasure Double gap ferrite head
Motor DC servo motor
Recording system AC bias 100
kHz
Erase system AC erase 100
kHz
Tape speed 4.8
cm/s
Overall frequency response (+3
dB, –6
dB) at DECK OUT
NORMAL 35
Hz – 14
kHz
S/N RATIO 42.64 dB (A weighted)
Wow and fl utter 0.08% (WRMS)
Fast forward and rewind time
Approx. 120 seconds with C-60 cassette tape
CD SECTION
Disc
CD, CD-R, CD-RW, MP3 8 cm/12 cm
Sampling frequency 44.1
kHz
Decoding 16/20/24 bit linear
Pick up
Beam source Semiconductor laser
Wavelength 780
nm
(For Norge)
Bølgelengde 780
nm
Laserstyrke Ingen farlig stråling sendes ut
Number of channels Stereo
Frequency response 20
Hz – 20
kHz (+1dB, –2
dB)
Wow and fl utter Below measurable limit
Digital fi lter 8
fs
D/A converter MASH (1 bit DAC)
MP3
Bit rate 32 kbps – 320 kbps
Sampling frequency 32 kHz, 44.1 kHz, 48 kHz
SPEAKER SECTION
Type 2 way, 2 speaker system
Speaker(s)
Woofer 10 cm cone type
Tweeter 6
cm cone type
Impedance 6
Ω
Input power (IEC)
HIGH 80
W (Max)
LOW 80
W (Max)
Output sound pressure level
For Australia and N.Z. 79
dB/W (1.0 m)
For others 81
dB/W (1.0 m)
Cross over frequency
For Australia and N.Z. 3
kHz
For others 2.5
kHz
Frequency range
For Australia and N.Z. 45
Hz – 26
kHz (–16
dB)
50
Hz – 25
kHz (–10
dB)
For others 55
Hz – 22
kHz (–16
dB)
75
Hz – 20
kHz (–10
dB)
Dimensions (WxHxD)
For Australia and N.Z. 153 mm x 254 mm x 239
mm
For others 145 mm x 254 mm x 217
mm
Mass
For Australia and N.Z. 1.8
kg
For others 2
kg
GENERAL
Power supply
For Continental Europe AC 230 V, 50 Hz
For United Kingdom, Australia and N.Z.
AC 230 – 240 V, 50 Hz
Power consumption 130
W
Dimensions (WxHxD) 175 mm x 254 mm x 391 mm
Mass 5.6 kg
Power consumption in standby mode 0.6 W
Notes:
1. Specifi cations are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum
analyzer.
3. The labels “HIGH” and “LOW” on the rear of the speakers refer to
High frequency and Low frequency.
MaintenanceMaintenance
If the surfaces are dirtyIf the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
• Never use alcohol, paint thinner or benzine to clean this
unit.
• Before using chemically treated cloth, read the instructions
that came with the cloth carefully.
For a cleaner crisper soundFor a cleaner crisper sound
Clean the heads regularly to assure good quality playback
and recording.
Use a cleaning tape (not included).
When moving the unitWhen moving the unit
1
Remove all discs.
2
Press [y/I] to turn the unit off.
3
Disconnect the AC mains lead.
PM31_7928-2B.indd 16PM31_7928-2B.indd 16 2/21/05 11:11:44 AM2/21/05 11:11:44 AM