User Guide

26
RQT7377
Specifi cations
g AMPLIFIER SECTION
RMS Power output
10% Total harmonic distortion
1 kHz, both channels driven
(Low channel) 35 W per channel (6 Ω)
8 kHz, both channels driven
(High channel) 35 W per channel (6 Ω)
Total Bi-Amp power 70 W per channel
Output Impedance
PHONES 16 - 32 Ω
g FM TUNER SECTION
Frequency range
87.50 - 108.00 MHz (50 kHz STEP)
Sensitivity 1.5 µV (IHF)
S/N 26 dB 1.5 µV
Antenna terminal(s) 75 Ω (unbalanced)
g AM TUNER SECTION
Frequency range
522 - 1629 kHz (9 kHz steps)
520 - 1630 kHz (10 kHz steps)
Sensitivity
S/N 20 dB (at 999 kHz) 560 µV/m
g CASSETTE DECK SECTION
Track system 4 track, 2 channel
Heads
Record/playback Solid permalloy head
Erasure Double gap ferrite head
Motor DC servo motor
Recording system AC bias 100 kHz
Erasing system AC erase 100 kHz
Tape speed 4.8 cm/s
Overall frequency response
(+3 dB, -6 dB at DECK OUT)
NORMAL (TYPE I) 35 Hz - 14 kHz
S/N 45 dB (A weighted)
Wow and fl utter 0.16 % (WRMS)
Fast forward and rewind time
Approx. 120 seconds with
C-60 cassette tape
g CD SECTION
Disc played
CD-DA/MP3/WMA, HighMat
8cm/12cm, CD/CD-R/CD-RW
Sampling frequency
CD-DA 44.1 kHz
MP3/WMA 32 kHz, 44.1 kHz, 48 kHz
Bit rate
MP3 32 - 320 kbps
Decoding 16 bit linear
Pickup
Beam source/wavelength
Semiconductor laser/780 nm
(For Norge)
Bølgelengde 780 nm
Laserstyrke
Ingen farlig stråling sendes ut
Number of channels Stereo
Frequency response
20 Hz - 20 kHz (+1, -2 dB)
Wow and fl utter Below measurable limit
Digital fi lter 8 fs
D/A converter MASH (1 bit DAC)
When moving the unit
1. Remove all discs.
2. Press [8] to turn the unit
off.
3. Disconnect the AC mains
lead.
Maintenance
For a cleaner crisper sound
Clean the heads regularly to assure
good quality playback and recording.
Use a cleaning tape (not included).
To clean this unit, wipe with a soft,
dry cloth.
•
Never use alcohol, paint thinner or
benzine to clean this unit.
•
Before using chemically treated
cloth, read the instructions that
came with the cloth carefully.
g SPEAKER SECTION
Type 2 way 2 speaker system
Speaker(s)
Full range 10 cm cone type
Tweeter 6 cm cone type
Impedance 6 Ω
Input power (IEC)
HIGH 70 W (Max.)
LOW 70 W (Max.)
Output sound pressure level
81 dB/W (1.0 m)
Crossover frequency 3.0 kHz
Frequency range
45 Hz - 50 kHz (-16 dB)
55 Hz - 45 kHz (-10 dB)
Dimensions (W x H x D)
151 x 250 x 229 mm
Mass 1.93 kg
g GENERAL
Power supply
For continental Europe
AC 230 V, 50 Hz
For United Kingdom, Australia and N.Z.
AC 230-240 V, 50 Hz
Power consumption 130 W
Dimensions (W x H x D)
179 x 250 x 383 mm
Mass 5.6 kg
Power consumption in standby mode:
Approx. 0.9 W
Note
1. Specifi cations are subject to change
without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by
the digital spectrum analyzer.
3. The labels “HIGH (HF)” and “LOW (LF)”
on the rear of the speakers refer to High
frequency and Low frequency.
Reference