SC-HTB880EB_RQT9904-B.book 1 ページ ２０１４年３月３日 月曜日 午前１０時２９分 Operating Instructions Home Theater Audio System Model No. SC-HTB880 Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. Included Installation Instructions The installation work should be done by a qualified installation specialist.
SC-HTB880EB_RQT9904-B.book 2 ページ ２０１４年３月３日 月曜日 午前１０時２９分 Safety precautions WARNING CAUTION Unit Unit ≥ To reduce the risk of fire, electric shock or product damage, jDo not expose this unit to rain, moisture, dripping or splashing. jDo not place objects filled with liquids, such as vases, on this unit. jUse only the recommended accessories. jDo not remove covers. jDo not repair this unit by yourself. Refer servicing to qualified service personnel.
SC-HTB880EB_RQT9904-B.book 3 ページ ２０１４年３月３日 月曜日 午前１０時２９分 (For the AC mains plug of three pins) For your safety, please read the following text carefully. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5-ampere fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5ampere and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark Ï or the BSI mark Ì on the body of the fuse.
SC-HTB880EB_RQT9904-B.book 4 ページ ２０１４年３月３日 月曜日 午前１０時２９分 Table of contents Safety precautions............................................................................................ 2 Caution for AC Mains Lead.............................................................................. 3 Before use Supplied items .................................................................................................. 5 This system (SC-HTB880) ...............................................................
SC-HTB880EB_RQT9904-B.book 5 ページ ２０１４年３月３日 月曜日 午前１０時２９分 Before use ≥ The illustrations shown may differ from your unit. ≥ These operation instructions are applicable to model SC-HTB880 for variety of regions. Unless otherwise indicated, illustrations in these operating instructions are of the model for the United Kingdom and Ireland. ≥ Operations in this operating instructions are described mainly with the remote control, but you can perform the operations on the main unit if the controls are the same.
SC-HTB880EB_RQT9904-B.book 6 ページ ２０１４年３月３日 月曜日 午前１０時２９分 Control reference guide This system (Front) 1 2 3 4 5 Main unit 7 6 8 9 Active subwoofer 1 2 NFC touch area (> 20) Standby/on switch (Í/I) Touch to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power.
SC-HTB880EB_RQT9904-B.
SC-HTB880EB_RQT9904-B.book 8 ページ ２０１４年３月３日 月曜日 午前１０時２９分 Remote control ∫ Before using for the first time Remove the insulation sheet A.
SC-HTB880EB_RQT9904-B.book 9 ページ ２０１４年３月３日 Step 1 Connections 月曜日 午前１０時２９分 Getting started ≥Turn off all equipment before connection and read the appropriate operating instructions. Do not connect the AC mains lead until all other connections are completed. ∫ HDMI (High-Definition Multimedia Interface) ≥ The HDMI connection supports VIERA Link “HDAVI Control” (> 25) when used with a compatible Panasonic TV. ≥ Use the ARC compatible High Speed HDMI Cables. Non-HDMI-compliant cables cannot be utilised.
SC-HTB880EB_RQT9904-B.book 10 ページ ２０１４年３月３日 月曜日 午前１０時２９分 [B] Not labelled “HDMI (ARC)” TV OPTICAL OUT HDMI IN A B A HDMI cable B Optical digital audio cable ≥ When you use the optical digital audio cable, insert the tip correctly into the terminal. Connection from an HDMI compatible device You can direct the audio signal from the connected Blu-ray Disc player, DVD player, Set Top Box, etc. to this system. Preparation ≥Connect the main unit to the TV. (> 9) HDMI OUT e.g.
SC-HTB880EB_RQT9904-B.book 11 ページ ２０１４年３月３日 月曜日 午前１０時２９分 ∫ HDMI standby pass-through Even if the main unit is in standby mode, the audio and/or video signal from the device connected to the HDMI AV IN1 or HDMI AV IN2 terminal will be sent to the TV connected to the HDMI AV OUT terminal (the sound will not be output from this system). When devices are connected to all HDMI AV IN1 and HDMI AV IN2 terminals, audio and/or video signal of the device whose input is lastly selected is output.
SC-HTB880EB_RQT9904-B.book 12 ページ ２０１４年３月３日 月曜日 午前１０時２９分 ∫ Placement example On the rear of the main unit: Adhesive tape (supplied) TV remote control signal sensor AC mains lead connection ≥ Connect only after all other connections are completed. AC IN A To a household mains socket B AC mains lead (supplied) ≥This system consumes a small amount of AC power (> 30) even when it is turned off.
SC-HTB880EB_RQT9904-B.book 13 ページ ２０１４年３月３日 月曜日 午前１０時２９分 Step 2 Placement Professional installation is required. The installation should never be done by any other than a qualified installation specialist. PANASONIC DISCLAIMS ANY PROPERTY DAMAGE AND/OR SERIOUS INJURY, INCLUDING DEATH RESULTING FROM IMPROPER INSTALLATION OR INCORRECT HANDLING. ≥ Be sure to install the main unit as indicated within this operating Instructions.
SC-HTB880EB_RQT9904-B.book 14 ページ ２０１４年３月３日 月曜日 午前１０時２９分 Selecting the placement method Choose a placement method that suits you best. When placing the main unit in a rack or on a table ≥ Place the main unit on a flat and horizontal surface. Page 15 When attaching the main unit to a wall ≥ Place the main unit on a flat and vertical surface. Page 16 ∫ When placing the main unit in front of the TV The main unit may block or interfere with the TV’s various sensors (C.A.T.S.
SC-HTB880EB_RQT9904-B.book 15 ページ ２０１４年３月３日 月曜日 午前１０時２９分 When placing the main unit in a rack or on a table Additionally required accessories (commercially available) ≥Fall prevention cord ...................................................................................................................... k 2 ≥Screw eyes (to attach the fall prevention cord) .............................................................................
SC-HTB880EB_RQT9904-B.book 16 ページ ２０１４年３月３日 月曜日 午前１０時２９分 When attaching the main unit to a wall The main unit can be wall mounted using the supplied wall mount brackets, etc. Make sure that the screw used and the wall are strong enough to support the weight of at least 33 kg. The screws and other items are not supplied as the type and size will vary with each installation. ≥Refer to step 3 for details about the required screws. ≥Be sure to attach the fall prevention cord as a secondary safety measure.
SC-HTB880EB_RQT9904-B.book 17 ページ ２０１４年３月３日 月曜日 午前１０時２９分 Attach the wall mount brackets to the main unit. Precautions A Wall mount bracket (supplied) B Screw (supplied) Drive a screw into the wall. ≥ ≥ ≥ ≥ Use the measurements indicated below to identify the screwing positions on the wall. Leave at least 100 mm of space above of the main unit to allow enough space for fitting the main unit. Position the main unit with at least 50 mm of free space to its right.
SC-HTB880EB_RQT9904-B.book 18 ページ ２０１４年３月３日 月曜日 午前１０時２９分 Fit the main unit securely onto the screw(s). DO DO NOT ≥ Move the speaker so that the screw is in this position. Secure the cord to the wall. ≥ Make sure that the slack of the cord is minimal. A Screw eye B Cord 18 RQT9904 ≥ In this position, the speaker will likely fall if moved to the left or right.
SC-HTB880EB_RQT9904-B.book 19 ページ ２０１４年３月３日 月曜日 午前１０時２９分 Step 3 Wireless connections Preparation ≥ Turn on the main unit. Press [BÍ CI]. Bluetooth® connection By using the Bluetooth® connection, you can listen to the sound from the Bluetooth® audio device from this system wirelessly. ≥ Refer to the operating instructions of the Bluetooth® device for further instruction on how to connect a Bluetooth® device.
SC-HTB880EB_RQT9904-B.book 20 ページ ２０１４年３月３日 One-Touch Connection (Connecting by NFC) For NFC-compatible Bluetooth® devices (AndroidTM devices) only Simply by touching an NFC (Near Field Communication)-compatible Bluetooth® device on the main unit, you can complete all preparations, from registering a Bluetooth® device to establishing a connection. Preparation ≥ Turn on the NFC feature of the device. ≥ Android device version lower than 4.
SC-HTB880EB_RQT9904-B.book 21 ページ ２０１４年３月３日 Using this system 月曜日 午前１０時２９分 Operations Preparation ∫ To adjust the volume of this system Press [i VOL j]. ≥ Turn on the active subwoofer. ≥ Turn on the TV and/or connected device. ≥ Volume range: 0 to 100 ∫ To mute the sound Press [MUTE]. ≥ While muting, “MUTE” is indicated on the display. ≥ To cancel, press the button again or adjust the volume. ≥ Muting is cancelled if the main unit is turned off.
SC-HTB880EB_RQT9904-B.book 22 ページ ２０１４年３月３日 3D sound This system provides a feeling that the sound and the image are as one. ≥ To change the applied effect, refer to “Sound menu”. (> right) e.g., Image of 3D sound field Dolby Virtual Speaker ® 3D surround effect Clear-mode dialog 3D sound With this effect you can enjoy a surround sound effect similar to 5.1ch.
H.BASS 3D CLR DIALOG ２０１４年３月３日 Enhance the harmonic bass effect. ON OFF The 3D Clear Mode Dialog feature creates a sound field similar to the sound coming from a TV screen and makes dialogues clearer. ON: 3D Surround, Clear Mode Dialog and Dolby Virtual Speaker effect OFF: Dolby Virtual Speaker effect The setting is set back to “ON” every time you turn the main unit on. DUAL AUDIO Sets the preferred audio channel mode when there are two audio modes received by this system.
SC-HTB880EB_RQT9904-B.book 24 ページ ２０１４年３月３日 月曜日 午前１０時２９分 Setup menu LINK MODE Change the Bluetooth® connection link mode to suit the connection type. Make sure that the Bluetooth® device is not connected (“PAIRING” or “BLUETOOTH READY” is indicated on the display). MODE 1: Emphasis on connectivity. MODE 2: Emphasis on sound quality. VIERA LINK Turn on the VIERA Link function. ON OFF Select “OFF” when your HDAVI Control device does not work correctly with this system. ARC will be disabled.
SC-HTB880EB_RQT9904-B.book 25 ページ ２０１４年３月３日 月曜日 午前１０時２９分 Linked operations with the TV (VIERA Link “HDAVI ControlTM”) VIERA Link “HDAVI Control” is a convenient function that offers linked operations of this system, and a Panasonic TV (VIERA) under “HDAVI Control”. You can use this function by connecting the equipment with an HDMI cable. See the operating instructions for connected equipment for operational details. Preparation 1 Confirm that the HDMI connection has been made.
SC-HTB880EB_RQT9904-B.book 26 ページ ２０１４年３月３日 Troubleshooting 月曜日 午前１０時２９分 Reference Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the following guide do not solve the problem, consult your dealer for instructions. To return to the factory preset. While the main unit is on, touch and hold [Í/I] on the main unit for more than 4 sec. (“RESET” is indicated on the display when this system is reset.
２０１４年３月３日 When the main unit is turned on or off, audio and video are temporarily disabled When the main unit is turned on or off it is normal for the audio and video to be temporarily disabled. This is not a malfunction. This can occur when the device it is connected to, via HDMI, does not support Panasonic’s VIERA Link feature (HDAVI Control 3 or later). The images from this system do not appear on the TV. When outputting in 60p (4K), images may be distorted depending on the HDMI cable.
SC-HTB880EB_RQT9904-B.book 28 ページ ２０１４年３月３日 There is no audio. The power of the main unit turns off automatically. (When the main unit detects a problem, a safety measure is activated and the main unit automatically switches to standby mode.) ≥ There is a problem with the amplifier. ≥ Is the volume extremely high? If so, lower the volume. ≥ Is this system placed in an extremely hot place? If so, move this system to a cooler place and wait a few moments and then try to turn it on again.
２０１４年３月３日 About Bluetooth® Panasonic bears no responsibility for data and/or information that is compromised during a wireless transmission. ∫ Frequency band used This system uses the 2.4 GHz frequency band. ∫ Certification of this device ≥ This system conforms to frequency restrictions and has received certification based on frequency laws. Thus, a wireless permit is not necessary. ≥ The action below are punishable by law in some countries: jTaking apart or modifying the unit.
SC-HTB880EB_RQT9904-B.book 30 ページ ２０１４年３月３日 月曜日 午前１０時２９分 Specifications AMPLIFIER SECTION RMS output power: Dolby Digital Mode Front ch (L, R ch) 50 W per channel (6 ≠), 1 kHz, 10 % THD Centre ch (C ch) 50 W per channel (6 ≠), 1 kHz, 10 % THD Surround ch (L, R ch) 50 W per channel (6 ≠), 1 kHz, 10 % THD Subwoofer ch 250 W per channel (8 ≠), 100 Hz, 10 % THD Total RMS Dolby Digital mode power 500 W TERMINAL SECTION HDAVI Control This unit supports “HDAVI Control 5” function.
SC-HTB880EB_RQT9904-B.book 31 ページ ２０１４年３月３日 月曜日 午前１０時２９分 SPEAKER SECTION Front speakers (Built-in) Woofer 6.5 cm cone type k1/ch Tweeter 2.5 cm Semi-Dome type k1/ch Centre speaker (Built-in) Full range 6.5 cm cone type k1 Surround speakers (Built-in) Full range 6.5 cm cone type k1/ch Active subwoofer Woofer 16 cm cone type k1 WIRELESS SECTION Wireless module Frequency Range 2.40335 GHz to 2.47735 GHz No. of channels 38 Bluetooth® SECTION Reference Bluetooth® system specification Bluetooth® Ver.3.
SC-HTB880EB_RQT9904-B.book 32 ページ ２０１４年３月３日 月曜日 午前１０時２９分 Disposal of Old Equipment and Batteries Only for European Union and countries with recycling systems These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste.
SC-HTB880EB_RQT9904-B.book 33 ページ ２０１４年３月３日 月曜日 午前１０時２９分 Limited Warranty (ONLY FOR AUSTRALIA) Panasonic Warranty 1. The product is warranted for 12 months from the date of purchase. Subject to the conditions of this warranty Panasonic or its Authorised Service Centre will perform necessary service on the product without charge for parts or labour, if in the opinion of Panasonic, the product is found to be faulty within the warranty period. 2.
SC-HTB880EB_RQT9904-B.
SC-HTB880EB_RQT9904-B.
SC-HTB880EB_RQT9904-B.book 31 ページ ２０１４年３月３日 月曜日 午前１０時２９分 For the United Kingdom and Ireland customers Sales and Support Information Customer Communications Centre ≥ For customers within the UK: 0844 844 3899 ≥ For customers within Ireland: 01 289 8333 ≥ Monday–Friday 9:00 am – 5:00 pm (Excluding public holidays). ≥ For further support on your product, please visit our website: www.panasonic.co.
