Panasonic Owner's Manual Home Theater Audio System Model No. SC-HTB350 SC-HTB351 €3 Bluetooth’ Thank you for purchasing this product, For optimum performance and safety, please read these instructions carefully. Please keep this manual for future reference If you have any questions. contact: U.S.A.
IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before Using the unit. Follow the safety instructions on the unit and the applicable safety Instructions sifted below, Keep these operating instructions handy far future reference. Rea these instructions. Keep these Instructions Heed al warnings. Folios: alt instructions: Do not use iis apparatus near water. Clean only with dry cloth Do riot block any ventilation openings.
CAUTION Leila Lardner A CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE SCREWS. NO USER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The: lightning flesh with armload symbol, within an equilateral tangle. is intended fo alert the user Io the presence of uninstalled “dangerous voyage within the byproducts enclosure fal may be of sufficient magnitude to constitute a risk of lit shock (© persons.
Table of contents IMPORTANT SAFETY INSTRUCTIONS occ. vuvuzela rinses saves svsvsssrias 8 Before use Supplied items System HTB) Accessories Control reference guide Main unit and active sub woofer (Front) . Main unit and active sub woofer (Rear) Remote control LL. Noo Burial Bf Getting started Step 1 Selecting the placement Speaker system. Active sub woofer . Wireless interference Step 2 Assembling the Speaker...
The solicitations Shown ial differ farm tout nik {® Operations In this Owner's Manuel ate described m i perform the operations on fhe main unit if the controls are the same. Supplied items E system (scuTe3soscHTEISY) st the res onl it you an | 71 Main unit (SU-HTE350) 1 1 Active sub woofer (SB-HWA3S0) oa i" 2 Front speakers {5B-HTH350} BE Accessories Check the supplied accessories before using the system, 2 Speaker cables (REGEX 12664; RED) {REEXPORT WHITE) Length: 3m (3.
Control reference guide EB Main unit and active sub woofer (Front) nF Main unit Active sub woofer 1 Standbys switch (Bb) © AUX indicator Press to switch the unit from on to standby Lights amber when the device connected mode of vice versa, In standby mode, the unit 10 the AUX terminal is the audio source @ > Bluetooth® indicator ii stilt consuming a small amount of power.
B remote control Turn the main unit on of oft (= 22) Adjust the dialog effect level {= 22) Adjust the outstrip level of the active sub woofer (bass sound) (= 22) Adjust the volume of this system (= 22) Mute the sound {= 22) Select the TV as the source (= 22) Select the Bluetooth” device as the source (= 22) Select the input sours BO/DVD a" AUX" Gus Wh @ ® Remote control operation range Bereave the insulation sheet € before using.
Step 1 Selecting the placement method Choose a placement method tat suits you best.
Caution » This system is to be used only as indicated in these instructions. Failure to do So may head to damage to the amplifier andiron the speakers, and may resell in the risk of fire. Consult a qualified service person i damage has slurred or if you experience a sudden change in performance.
Step 2 Assembling the speakers B When attaching the speakers to a wall Place the speakers horizontally 2 Speakers } 2 Speaker cables } 1 Speaker joint {LY WHITE ad AF {R): RED W 4 Screws . ’ FF For a safety measure to prevent the speakers from falling, refer to page 17. To prevent damage or scratches, lay down a soft cloth and perform the assembly on it. Assemble the speakers. » The tao speakers are interchangeable.
Connect the speaker cables. ® Lie the "Panasonic logo to identify the theft ani right speak then connect the tables (as dissipated) © insert the wire fully. +: White — Blue line © Press into the groove. £ RED: Right speaker channel (R) © WHITE: Left speaker channel (L) * Insert the wire fully, faking care not to insert beyond the wire insulation. y Drive a screw into the wall.
a Fit the speaker securely onto the screw(s). DO DO NOT * Nov the speaker su ® in this position, the that the sower is In this L speaker wit lively fall if position. moved to tha left or right. Place the speakers vertically Speakers 7] 2 Speaker cables 77 Z Front armaments (L}: WHITE i {Ry RED 4 Screws pr ; hd For a safety measure to prevent the speakers from falling, refer to page 17. To prevent damage or scratches, lay down a soft cloth and perform the assembly on it. EE Attach the front ornaments.
2 Connect the speaker cables. * Insert the wire fully, taking care not fo insert beyond the wire insulation. © Insert the wire fully, +: White Blu fine ©) Tress into the groove. Use the measurements indited below ts identity the screwing positions on the wall * Leave at feast space above and an each side of the speaker 10 allow enough space for fighting the speaker. « “Th sinusitis in te wal where the screw is 1o be attached as we as the sower souls be capable of sporting aver 33 ky.
B When placing the speakers on a table ESPN Place the speakers using the stands | 2 Speakers 1 2 Speaker cables "1 1 Speaker joint 5 (Ly WHITE I ad (R): RED 5 8 Brews | 2 Stands # For a safety measure to prevent the speakers from falling, refer to page 17. Ta prevent damage of scratches, lay down a soft cloth and perform the assembly on It Assemble the speakers following steps 1 and 2 of “Place the speakers horizontally” (= 10}. Attach the stands.
pp Place the speakers using the support legs and speaker feet 2 Speakers "1 2 Speaker cables . i 4 Speaker joint GF (Ly: WHITE A wl {R}: RED % | 5 Screws , 1 2 Support legs 2 Speaker feet FF a J Far a safety measure to prevent the speakers from falling, refer to page 17. To prevent damage or scratches, lay down a soft cloth and perform the assembly on it Assemble the speakers following steps 1 and 2 of “Place the speakers horizontally” (= 10). Attach the support legs and speaker feet.
Place the speakers using the speaker bases | 2 Speakers i" 2 Speaker cables i 2 Bases # (L): WHITE Pd (R): RED 1 2 Front ornaments {7} 6 Screws # For a safety measure to prevent the speakers from falling, refer to page 17. Ta prevent damage of scratches, lay down a soft cloth and perform the assembly on It Assemble the speakers following step 1 of “Place the speakers vertically” (= 12). 7 insert the speaker cable through the base.
Connect the speaker cables. ® Insect ihe wire fully, taking eave not to in beyond the wire invitation, eo Back of the base insert the wie fully +: White ~~ Blue line Press into the groove.
When placing the speakers on a table Horizontal placement © Cord” © wall © Sockeye © Approx. 150 rom (5 2 » Depending an the placement of the speakers, the screwing position of the screw eye nay differ if the cord cannot be threaded through the holes, try bending the cord in 2 locations, about 10 mim apart from the tip, at an angle of 459 (as frustrated above).
Step 3 Connections o Turn off all equipment before connection and read the appropriate owner's manual. Do not connect the AC power supply cord until all other connections are complete. E connection with the Tv OPTICAL OUT _ 1-1 Optical digital audio cable * Her you use the optical digital audio cable, meet the tip correctly into the terminal BE Connection with other devices You can direct the audio signal from the connected Blu-ray Disc player™. OVD player, Set Top Box, etc.
B Speaker cable connection Match the connector shape and connect to the terminals of the same color. WEES © eC EEE Main unit 0 RED © WHITE Right speaker channel (R) Left speaker channel (L} BE AC power supply cord connection * Connect only after all other connections are complete, Active sub woofer en Main unit © AC power supply cord @ Toa household AC outlet # The main unit and active sub woofer consume a small amount of AC power, even when iris muted off {this unit: approx. 0.
Active sub woofer wireless connection Preparation ® Tum an the main unit Press [RO wl]. Check that the wireless link is activated, WIRELESS LINK indicator lights + Red: The wireless link is not activated.
Using this unit Preparation ® Turn on the TV and/or connected device. Press [(D] to turn on the main unit. Ba Select the source. (Blustootn®) INPUT TV BOOED AUX This remote control cannot be Vised to control the operations of the connected devices.
| unsound “This system provides a feeling that the sound and the image are as one. The 30 sound effect will be applied to Multi-channel audio sources as a factory prates. 2.4. image of 3D sound field B audio output modes As a factory preset. Dolby Virtues Speaker and the 30 surround effects wil be applied to Multi-channel audio sources, such as those from a Blu-ray Disc player™ or DVI player, ete.
Advanced operations Changing the dual audio Chang the dual audit fom main to secondary. Confirm the digital audio output sifting on the connected TV or player, ete. is set to “Mainstream. [#2 Press and hold [TV] for more than 2 sec. While the indicator of the current setting is blinking, press [TV]to change the setting. “The indicator for the current sting bits for 10 seo. BS ©: Main Main and secondary » The siting wks only whens the duel aurora is available in the audio source.
| Others The following settings are Unnecessary under reinstall Brahe conditions of the system. ® Remote control code When other Panasonic devise respond (0 this system's remote control, change the remote control code or: the main unit and the remote control Preparation * Turn off all other Panasonic products. * Tum on the main unit Change the remote control code to aced 2: 1 Aim the remote control at this system's remote control sensor. 2 Press and hold [MUTE] and on the remote control for more than 4 see.
Troubleshooting Before requesting servos, make the following chis. If your are in doubt about some of the check points, or if the Solutions indicated in the following good do not solve the probably, ceder to “Customer Saragossa Directory (United States and Puerto Rico’ on page 31. To.return fo the factory preset. While the main unit is on, press [hf] on the main. unit for more than 4 sec. (All the indicators will blink twice when the main unit is reset.
The dialog is too persistent or the dialog does not sound natural. This system has a function to make the dialog stand out when the volume is tow. (= 25} There Is no audio, The power of the main unit turns off automatically. (When the main unit detects a problem, a safety pressures is activated and the main unit automatically switches fo standby node.) © There is a problem with the amplifier, * ls the volume extremely high? if so, lower the volume.
Indicator illumination The indicators display the condition of this system by flashing. The indicator patters illustrated below are displayed during normal operational conditions, They do not refer to the indications of a problem. Refer to “Troubleshooting” {= 26] if the indicators do not light up as illustrated below. indicator | Description The indicators blink simultaneously.
Specifications J AMPLIFIER SECTION RMS output power 14 % total harmonic distortion Sub woofer ch 120 W per channel (100 Hz, B82) Front BOW per channel (1 kHz. 8 Q) Total RMS Dolby Digital mode power 240W FTC output power 1.0 % total harmonic distortion Sub woofer ch B80 Hz 0 120 Hz 40 W (B12) Front 120 Hz 10 20 KHZ Total FTC Daley Digital mode power aw WIRELESS SECTION Wireless module Frequency Range 5.150 GHz to 5.250 GHz 5.725 GHz to 5.
SPEAKER GENERAL Horizontal placement using the stands Dimensions (WxHxD) 956 mm 102 mmx X22) Mass (Weight) 161 ke (3.7 ibs) Horizontal placement using the speaker feet and the support legs Dimensions (WxHxD) 56 mm 78 mmx 55 rom (37 0X3 iN 2 8h) Mass (Weight) 157 ke (3.5 ibs) Horizontal placement {for wall mount} Dimensions (WxHXD) 956 mmx 75 mm x35 mm (37 9X2 Fhe X 19) Weiss (Weight) 154 kg (3.5 bs) Vertical placement using the speaker bases Dimensions (WXHXD) 148 ms 528 mm 145 mm (5 Weiss (Weight) 0.
If you ses this symbol Information on Disposal in other Countries outside the European Union This symbol is only valid in the European Union If you wish to discard this product, please contact your local authorities ar dealer and ask for the correct method of disposal ERIE 3) As an ENERGY STAR Partner, Panasonic has determined that this product meets the ENERGY STAR guidelines Yor energy efficiency.
