Quick Start Manual

VQC8931-1
Quick Start Guide
Home Theater Audio System SC-HTB20
Step 1: Choose in the configuration that is right for you
Place the speakers
horizontally
Place the speakers
vertically
To prevent damage or scratches, lay down a soft cloth
and perform the assembly on it.
To prevent damage or scratches, lay down a soft cloth
and perform the assembly on it.
2
4
1
3
Push
Insert the wire fully while
pushing the lever.
r: White
s: Blue line
2
2
1
1
Insert the wire fully
while pushing the
lever.
r: White
s: Blue line
Push
Pull the cable straight along
the line and slide into the
groove.
≥ Be sure to place the cable under
the projecting part.
Front view Rear view
Push
≥ Place the speaker that is connected with the speaker cable with a red connector on the observers’ right, and connect
with the speaker cable with a white connector on the observers’ left.
If you have any questions, contact:
U.S.A. and Puerto Rico: 1-800-211-PANA (7262)
Mon-Fri: 9 ams9 pm (EST) Lunes-Viernes
Sat-Sun: 10 ams7 pm (EST) Sabado-Domingo
http://www.panasonic.com/help
Canada:
Telephone: [phone]
E-mail link: “Support
# contact us # email” on www.panasonic.ca
SC-HTB20_PPC_ESG_VQC8931_eng.fm 5 ページ ２０１２年３月７日 水曜日 午後１時３１分