Operation Manual

12
RQT9772
Attach the stands if necessary. If not, proceed to step 3.
Place the main unit in the desired position and attach each cord onto
the rack or table.
≥ Make sure that the slack of the cord is minimal.
[A]: With basic stands [B]: With 30
o
stands [C]: With 80
o
stands
A Screw (supplied)
≥ Tighten securely.
B Screw eye
≥Attach at a position capable of supporting over 33 kg.
≥Depending on the placement of the main unit, the screwing position of
the screw eye may differ.

e.g., With basic stands

SC-HTB170EGEBGN_RQT9772-B.book 12 ページ ２０１３年２月４日 月曜日 午前９時５分