User Manual
Table Of Contents
- Safety precautions
- Accessories
- Unit care
- Table of contents
- Before use
- Preparation
- Operation
- Using this system
- Bluetooth® connection
- Linked operations with the TV (VIERA Link “HDAVI ControlTM”)
- Sound menu
- Other settings that may be needed
- Remote control code
- Automatic power off function (Auto Power Down)
- Turning off the VIERA Link (HDMI) (HDAVI ControlTM) function
- Bluetooth® Standby
- Switching the Bluetooth® communication mode
- Switching dual audio broadcasts
- Adjusting the difference between images and audio (Audio delay function)
- Turning off the volume limitation
- Dynamic range compression
- Dialogue control
- Other
Preparation
9
Verify if the TV’s HDMI terminal is labelled “HDMI (ARC)”.
A AC adaptor (supplied)
B HDMI cable (not supplied)
A AC adaptor (supplied)
B HDMI cable (not supplied)
C Optical digital audio cable (not supplied)
Connection with the TV
What is ARC?
ARC is an abbreviation of “Audio Return Channel”, also known as HDMI ARC. It refers to one of the HDMI functions. When
you connect the terminal labelled “ARC” and this system, TV pictures and sound can be enjoyed with a single HDMI cable.
Labelled “HDMI (ARC)”
HDMI IN
(ARC)
A B
To a household AC outlet
Be sure to connect to the
TV’s ARC compatible
terminal.
This system (rear)
Not Labelled “HDMI (ARC)”
HDMI IN
DIGITAL AUDIO OUT
(OPTICAL)
A B C
To a household AC outlet
This system (rear)
Changing the settings of your TV
To connect this system and the TV with an HDMI cable, you need to change the TV settings to output sound correctly
from this system. The instructions below use a Panasonic TV (VIERA) as an example.
• The operating procedure and the names of on-screen displays differ depending on the TV (VIERA). Refer to the
Owner’s Manual or electronic Owner’s Manual for the TV (VIERA) for details.
1 Connect this system and the TV with an HDMI cable. (> 7)
• After connecting this system and the TV, turn them on.
2 Set the TV’s sound output destination to “Home theater”.
• Check to see if the VIERA Link setting of each device is turned on.
• Please also follow the steps above after adding a new device, reconnecting to the TV or restoring the default settings.