User Manual
Table Of Contents
- Safety precautions
- Accessories
- Unit care
- Table of contents
- Before use
- Preparation
- Operation
- Using this system
- Bluetooth® connection
- Linked operations with the TV (VIERA Link “HDAVI ControlTM”)
- Sound menu
- Other settings that may be needed
- Remote control code
- Automatic power off function (Auto Power Down)
- Turning off the VIERA Link (HDMI) (HDAVI ControlTM) function
- Bluetooth® Standby
- Switching the Bluetooth® communication mode
- Switching dual audio broadcasts
- Adjusting the difference between images and audio (Audio delay function)
- Turning off the volume limitation
- Dynamic range compression
- Dialogue control
- Other
Preparation
8
• When connecting with a PC monitor that has a resolution other than Full HD or 4K (WQHD, etc.), connect directly to
the PC using a DP cable (A) (optional).
Basic connection
Changing the settings of the PC/Game device etc.
(The instructions below use a PC as an example.)
To connect this system and the PC with an HDMI cable, you need to change the PC settings to output sound
correctly from this system.
• For details, refer to the operating instructions for the PC for details.
1 Connect this system and the PC with an HDMI cable. (> 7)
• After connecting this system and the PC, turn them on.
2 Set the PC’s sound output destination to “SOUNDSLAYER”.
• Confirm that the CEC linking function of each connected device is ON.
• When you connect to a device that does not have the CEC linking function, audio output settings may be required on the connected
device.
• Please also follow the steps above after adding a new device, reconnecting to the PC or restoring the default settings.
HDMI IN
(ARC)
HDMI IN
HDMI OUT
A
TV
HDMI cable
(not supplied)
HDMI cable
(not supplied)
This system (rear)
PC/Game device etc.
To a household AC
outlet
AC adaptor
(supplied)
AC power supply cord
(supplied)
PC monitor