Manual

ill
\
_e
(R6, AA, UM-3)
Remote control
signalsensor
Transmission
About 7 meters (23 feet)
window
in front of the signal
sensor.
Use of batteries ]
• Align the poles (+ and -) propedy when inserting the batteries.
Press in and down towards the minus end.
• Do not mix old and new batteries, or battedes of different types.
• Do not recharge ordinary dry cell battedes.
• Do not heat or disassemble the bettodes. DO not allow them to
contact flame or water.
• Remove the batteries if the unitis not to be used for a long time.
• DO not keep together with metallic objects such as necklaces.
• DO not use bettedes if the covering has been peeled off.
• Do not use rechargeable type bettedes.
Mishandling, of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
If electrolyte leaks from the battedes, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with any
part of your body.
Operation notes 1
• Do not place obstacles between the remote control signal
sensor and remote cOntrolunit.
• Do not expose the remote control signal sensor to direct
sunlight or to the bdght light of s fluorescent light.
• Take care to keep the remote control signal sensor and end of
the remote control unit free from dust.
• If this system is installed in a rack with glass doors, the glass
doors' thickness or color might make it necessary to use the
remote control a shorter distance from the system.
I To prevent damage I
• Never placeheavyitemsontopof the unit,
• Do notdisassembleor reconstructthe unit.
• Do notspitlwateror otherliquidsintothe unit,
[] HOW to open the remote control I